Artroscopia do joelho de ovinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ovinos como modelo experimental: estudo do joelho e mensuração dos ângulos tibiais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação clínica, radiográfica e histopatológia após aprofundamento do sulco troclear e aplicação de grampo metálico: estudo experimental em cães

Pós-graduação em Medicina Veterinária - FMVZ

Localized periodontal disease induced by bacterial plaque and palatal radicular groove: treatment and considerations

The palatal radicular groove is a morphological tooth defect, which act as local predisposing risk factor favoring accumulation of the bacterial plaque, permitting microbial invasion via root groove way, directly into periodontal structures. A patient diagnosed with palatal radicular groove and a localized periodontal disease was treated by procedures to control bacterial action and procedures to eliminate local predisposing risk factor. To treat the periodontal bone defect a sequelae of periodontal disease, a guided tissue regeneration technique was applied by using allograft and xenograft materials associated with a resorbable demineralized bovine cortical bone membrane. The objective of surgical regenerative procedure was to recover the periodontal tissues nearly as they were before periodontal disease destruction.

Fósforo na produtividade e qualidade de sementes de feijão Carioca Precoce cultivado no período das águas

Common bean is an important crop in Brazilian agriculture and phosphorus (P) deficiency is one of the most yield limiting factors for this crop, thus plant P-deficiency can hamper the seed physiological quality. The objective of this study was to evaluate the productivity and quality of common bean seeds cv. Carioca Precoce cultivated during the rainy season in response to phosphate fertilizer. Six levels of P (0; 30; 60; 90; 120 and 150 kg of P2O5 had), with five replications, were applied in the groove of sowing as triple superphosphate. The seeds yield, at the experimental plot, was determined by the dry weight. Seed quality was evaluated through the following determinations: 100-seed mass, seed moisture content, germination, first counting, moisture content after accelerated aging, germination after accelerated aging, electrical conductivity, seedling emergence in the field and seedlings dry weight. The productivity of beans seeds 'Carioca Precoce' cultivated during the rainy season increased linearly as related to phosphorus rates. The 100-seed mass and the physiological quality of seeds have not changed by increasing of P levels.

Efeitos de fontes de nitrogênio e de modos de aplicação do adubo fosfatado (32P) sobre a porcentagem de utilização do fósforo do superfosfato simples pelo trigo (Triticum aestivum L.)

No programa de pesquisa a respeito da adubação da cultura de trigo, utilizando isotopos (32P e 15N), o plano do ano 1971/1972 tinha, entre outros objetivos, a finalidade de determinar a porcentagem de aproveitamento do fósforo pelo trigo, em função do modo de aplicação e interação com fontes de nitrogênio. Oexperimento foi instalado em solo pertencente a ordem Ultisol e grande grupo Podzólico Vermelho-Amarelo (Pelotas-RS), contendo 9 ppm de P. Os adubos nitrogenados: sulfato de amônio, uréia e nitrato de amônio, na dose de 120 kg/ha, foram aplicados metade no plantio (ao lado e abaixo das sementes) e metade em cobertura, na fase do perfilhamento. O fósforo radioativo, na forma de superfosfato simples, foi aplicado na dose de 30 kg P2O5/ha de duas maneiras: junto com as sementes ou junto com o adubo nitrogenado aplicado no plantio. Amostras de plantas de trigo foram coletadas entre perfilhamento e espigamento e determinaram-se os pesos de matéria verde e seca, as porcentagens de P total e de P proveniente do fertilizante contidos na matéria seca e a porcentagem de utilização do fósforo aplicado (% UP). Pode-se concluir que a aplicação de nitrogênio é necessário para se obter maio res % UP, mas não há diferenças entre as fontes. Os modos de aplicação do fósforo não diferiram entre si quanto a % UP.

Efeito do déficit de água no aproveitamento do nitrogênio - 15n na cultura do trigo

Três fontes de nitrogênio - 15n foram utilizadas: sulfato de amônio, nitrato de amônio e uréia. Elas foram aplicadas no plantio de dois modos: a lanço e a seguir incorporadas ao solo, ou no sulco de plantio. Determinou-se a eficiência de utilização do nitrogênio - 15n aplicado no plantio e no perfilhamento, sendo respectivamente, em media 14 e 13% do nitrogênio aplicado e utilizados pelo trigo. Obtiveram-se valores de 16 e 12% de eficiência do nitrogênio - 15n aplicado no sulco de plantio ou a lanço e a seguir incorporado ao solo, respectivamente.

Influência do tipo de chanfro, tecimento e sentido de laminação na distorção angular em soldagem GMAW-P robotizada de alumínio

The industry's interest in having a greater control of the deformations caused by welding is due to the geometric and dimensional tolerances been more and more precise in the project specifications, motivating the manufacturing engineering to develop stable processes and to ensure routine production. Aiming at it, the main goal of this present work is to analyze how much routine situations used in automatic aluminum welding can influence on the angular deformations of this material. Using the alloy AA 5052 H34, and the automatic welding in pulsed GMAW process, three types of weaving were applied throughout the length of the weld, in butt joints assembled without groove and with 60 degrees single-V-groove, arranged transversely as well as longitudinally to the rolling direction of the plate. The measurement of the deformations was made by a three-dimensional equipment, before and after the welding, in three distinct regions in the specimens. The profile of the weld bead was the main factor for the different types of deformations found, as revealed by macrographical analysis. The 60 degrees single-V-groove had higher amplitudes of deformations as the joint without groove. The torch oscillation wasn't a variable of statistically significant influence on this amplitudes.

Accuracy of fetal gender determination in maternal plasma at 5 and 6 weeks of pregnancy

Objective To assess the viability of the early diagnosis of fetal gender in material plasma before 7 weeks of pregnancy by real-time polymerase chain reaction (real-time PCR), starting at 5 weeks of pregnancy.Method peripheral blood was collected from pregnant women, starting at 5 weeks of gestation. After centrifugation, plasma was separated for fetal DNA extraction. DNA was analyzed by quantitative real-time PCR for two genomic regions, one on the Y chromosome (DYS-14) and the other shared by both sexes (beta-globin), by the TaqMan Minor Groove Binder (MGB) probe assay. The results of the examinations were compared to fetal gender determined after delivery.Results A total of 79 examinations of fetal DNA in maternal plasma were performed for 52 pregnant women. Accuracy according to gestational age was 92.6% (25 of 27 cases) at 5 weeks, and 95.6% (22 of 23 cases) at 6 weeks. These results also demonstrate that fetal DNA is present at low concentrations in maternal plasma at 5 weeks (8.5 genome equivalents (GE)/mL) and 6 weeks (34.1 GE/mL) of pregnancy.Conclusion Quantitative real-time PCR and TaqMan MGB probes specific for the detection of fetal gender in maternal plasma starting at 5 weeks of gestation have good sensitivity and excellent specificity. Copyright (c) 2006 John Wiley & Sons, Ltd.

Utilização de contrairritante no tratamento da fixação dorsal de patela intermitente em equinos: relato de casos

Em nove equinos atendidos por apresentarem fixação dorsal de patela intermitente, optou-se pela aplicação de 2mL de contrairritante na região subcutânea, ao longo dos ligamentos patelares medial e intermédio. No período de 12 a 48h após a aplicação, os animais apresentaram aumento de volume e de temperatura local, sensibilidade dolorosa à palpação e relutância à locomoção. Após esse período, os sinais clínicos de inflamação e fixação dorsal de patela foram gradativamente diminuindo até o sétimo dia, em sete dos nove animais avaliados. Após a remissão dos sinais de inflamação, dois animais não responderam ao tratamento, sendo necessária a repetição em um dos casos e realização de desmotomia patelar medial no outro. A aplicação de contrairritante foi eficaz na remissão do sinal clínico de fixação dorsal da patela intermitente. Comparativamente às técnicas cirúrgicas para a correção da enfermidade descritas na literatura, o tratamento promoveu melhora precoce dos sinais, curto período de convalescência e praticidade na realização.

Avaliações radiográfica e ultra-sonográfica do joelho de ovinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of implant design on insertion torque and immediate micromotion

Objectives: To evaluate the effect of insertion torque on micromotion to a lateral force in three different implant designs. Material and methods: Thirty-six implants with identical thread design, but different cutting groove design were divided in three groups: (1) non-fluted (no cutting groove, solid screw-form); (2) fluted (901 cut at the apex, tap design); and (3) Blossomt (Patent pending) (non-fluted with engineered trimmed thread design). The implants were screwed into polyurethane foam blocks and the insertion torque was recorded after each turn of 901 by a digital torque gauge. Controlled lateral loads of 10N followed by increments of 5 up to 100N were sequentially applied by a digital force gauge on a titanium abutment. Statistical comparison was performed with two-way mixed model ANOVA that evaluated implant design group, linear effects of turns and displacement loads, and their interaction. Results: While insertion torque increased as a function of number of turns for each design, the slope and final values increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- standard deviation [SD] = 64.1 +/- 26.8, 139.4 +/- 17.2, and 205.23 +/- 24.3 Ncm, respectively). While a linear relationship between horizontal displacement and lateral force was observed for each design, the slope and maximal displacement increased (Po0.001) progressively from the Blossomt to the fluted to the non-fluted design (M +/- SD 530 +/- 57.7, 585.9 +/- 82.4, and 782.33 +/- 269.4 mm, respectively). There was negligible to moderate levels of association between insertion torque and lateral displacement in the Blossomt, fluted and non-fluted design groups, respectively. Conclusion: Insertion torque was reduced in implant macrodesigns that incorporated cutting edges, and lesser insertion torque was generally associated with decreased micromovement. However, insertion torque and micromotion were unrelated within implant designs, particularly for those designs showing the least insertion torque.

Size at maturity and egg capsules of the softnose skates Bathyraja brachyurops (Fowler, 1910) and Bathyraja macloviana (Norman, 1937) (Elasmobranchii: Rajidae) in the SW Atlantic (37 degrees 00'-39 degrees 30'S)

P>The softnose skates Bathyraja brachyurops and Bathyraja macloviana represent an important portion of the skate catches of the Uruguayan trawling fleet in the southwestern Atlantic. From March to October 2004, specimens of these species were collected at 75-200 m depth range in the area situated between latitudes 37 degrees 00'-39 degrees 30'S. For B. brachyurops, total length at which 50% of the specimens were retained by the gear was 68.0 cm for both sexes; T(L50) was estimated at 65.4 cm for males and 67.0 cm for females. For B. macloviana, total length at which 50% of the specimens were retained was 56.0-57.0 cm for both sexes; T(L50) was estimated at 53.5 cm for males and 52.0 cm for females. Egg capsule length varied from 79-91 mm in B. brachyurops and 69-75.5 mm in B. macloviana. In both species, capsules displayed striated surfaces and similar gross morphology, although egg capsules of B. macloviana had more robust anterior horns and a smaller size than those of B. brachyurops. Egg capsules of the latter also exhibited microscopical prickles. Capsule edges were laterally keeled with a groove along the keel, and a straight and transverse velum was present in the egg capsules of both species.

Efeitos od laser CO2 na mandíbula de ratos: Estudo através da microscopia eletrônica de varredura

A face lateral do corpo da mandíbula de ratos foi irradiada pelo laser CO2 com disparos contínuos de 10watts de potência. Após três meses, o sulco formado pela irradiação apresentou, em uma grande extensão, material fundido com diversas fraturas. Após sete meses, o periósteo neoformado recobriu amplas áreas da incisão, que apresentou ainda material carbonizado. Um ano após a incisão, o periósteo neoformado estava composto por fibras colágenas, que formaram feixes espessos, transversais à incisão, ou malhas regulares, que recobriram a incisão. Ainda nessa fase, resquícios de material carbonizado foram verificados, caracterizando um retardo na regeneração óssea

Poliuretana de mamona (Ricinus communis) para desvio da crista tibial no cão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)