Atributos físicos nos tempos de adoção de manejos em Latossolo cultivado com soja

A condução das operações de preparo de forma inadequada ocasiona sérios problemas de conservação do solo, destacando-se a compactação, que acarreta a redução do espaço poroso, principalmente dos macroporos, e altera os atributos físico-hídricos. Este trabalho teve como objetivo verificar a influência dos diferentes sistemas e tempos de adoção de manejos em Latossolo Vermelho de Jaboticabal, Estado de São Paulo, por meio da densidade máxima, e correlacioná-la com a produtividade da soja, a densidade relativa e a umidade crítica de compactação. O delineamento experimental foi o inteiramente casualizado com parcelas subdivididas (cinco sistemas de uso e três camadas), com quatro repetições. Os cinco sistemas de uso foram: plantio direto por cino anos (SPD5), plantio direto por sete anos (SPD7), plantio direto por nove anos (SPD9), preparo convencional (SPC) e uma área adjacente de mata nativa (MN). As camadas do solo avaliadas foram as de 0-0,10, 0,10-0,20 e 0,20-0,30 m, nas quais foram determinados a densidade máxima do solo (Ds máx), a umidade crítica de compactação (Ugc), a densidade relativa do solo (Dsr), a composição granulométrica, a porosidade e o teor de matéria orgânica do solo. Os resultados mostraram que o comportamento das curvas de compactação do solo foi o mesmo em todas as camadas dos diferentes manejos e que os teores de matéria orgânica não justificaram as pequenas alterações da Ds máx. Para o Latossolo Vermelho, as operações mecanizadas nos sistemas de manejo podem ser executadas na faixa de 0,13 a 0,19 kg kg-1 de umidade sem causar degradação física. Verificou-se que a Dsr ótima e a umidade crítica de compactação foram de 0,86 e 0,15 kg kg-1, respectivamente, embora os diferentes sistemas e tempos de adoção de manejo tenham apresentado comportamento semelhante quanto à produtividade da soja.

Preparation of hierarchically structured porous aluminas by a dual soft template method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efficiency of ethanol conversion induced by controlled modification of pore structure and acidic properties of alumina catalysts

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Design of hierarchical porous aluminas by using one-pot synthesis and different calcination temperatures

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Formation of TiO2 ceramic foams from the integration of the sol-gel method with surfactants assembly and emulsion

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Zirconia foams prepared by integration of the sol-gel method and dual soft template techniques

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The use of landforms to predict the variability of soil and orange attributes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactide-co-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 mu m thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8 similar to 1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.

Powder processing and In Vivo evaluation of a titanium porous coating implant

The processing of titanium porous coatings using powder metallurgy technique to achieve a porous structure that allows osseointegration with bone tissue was discussed. The porous microstructure exhibited micropores and interconnected macropores with size ranges that allowed bone ingrowth. The macropores in the coatings were originated from the binder evaporation while the micropore was related with the porous titanium powder and the low compaction pressure used. The in vivo evaluation indicated that osseointegration had occurred between the bone and porous material.

Liquid foam templates associated with the sol-gel process for production of zirconia ceramic foams

The unique properties of ceramic foams enable their use in a variety of applications. This work investigated the effects of different parameters on the production of zirconia ceramic foam using the sol-gel process associated with liquid foam templates. Evaluation was made of the influence of the thermal treatment temperature on the porous and crystalline characteristics of foams manufactured using different amounts of sodium dodecylsulfate (SDS) surfactant. A maximum pore volume, with high porosity (94%) and a bimodal pore size distribution, was observed for the ceramic foam produced with 10% SDS. Macropores, with an average size of around 30 μm, were obtained irrespective of the SDS amount, while the average size of the supermesopores increased systematically as the SDS amount was increased up to 10%, after which it decreased. X-ray diffraction analyses showed that the sample treated at 500 °C was amorphous, while crystallization into a tetragonal metastable phase occurred at 600 °C due to the presence of sulfate groups in the zirconia structure. At 800 and 1000 °C the monoclinic phase was observed, which is thermodynamically stable at these temperatures. © 2013 by the authors; licensee MDPI, Basel, Switzerland.

Preparação de aluminas porosas hierarquicamente estruturadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structure and catalytic properties of sulfated zirconia foams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)