High sensitivity fiber optic angular displacement sensor and its application for detection of ultrasound

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On the characterisation of electrically stressed polyethylene before and after chemical treatment

Low-density polyethylene (LDPE) was characterised for its dielectric and electrical properties before and after chemical treatment. A reduction in the permittivity and dielectric loss was observed in the polymer after treatment with hexane. The intensity in the Raman Spectrum in the disordered longitudinal acoustic mode region (DLAM) also was reduced due to a hexane treatment. Using thermally stimulated discharge current (TSDC) and laser-intensity-modulated method (LIMM) techniques it was observed that charge injection can be enhanced in the polymer matrix in the empty sites, created by the removal of the low molecular weight impurities with chemical treatment. (C) 2002 Kluwer Academic Publishers.

Extensive Comparisons of Optical Fast-OFDM and Conventional Optical OFDM for Local and Access Networks

A performance comparison between a recently proposed novel technique known as fast orthogonal frequency-division multiplexing (FOFDM) and conventional orthogonal frequency-division multiplexing (OFDM) is undertaken over unamplified, intensity-modulated, and direct-detected directly modulated laser-based optical signals. Key transceiver parameters, such as the maximum achievable transmission capacity and the digital-to-analog/analog-to-digital converter (DAC/ADC) effects are explored thoroughly. It is shown that, similarly to conventional OFDM, the least complex and bandwidth efficient FOFDM can support up to similar to 20 Gb/s over 500 m worst-case multimode fiber (MMF) links having 3 dB effective bandwidths of similar to 200 MHz X km. For compensation of the DAC/ADC roll-off, a power-loading (PL) algorithm is adopted, leading to an FOFDM system improvement of similar to 4 dB. FOFDM and conventional OFDM give similar optimum DAC/ADC parameters over 500 m worst-case MMF, while over 50 km single-mode fiber a maximum deviation of only similar to 1 dB in clipping ratio is observed due to the imperfect chromatic dispersion compensation caused by one-tap equalizers.

A matheuristic for the selection of beam directions and dose distribution in radiotherapy planning

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

High intensity social conflict in the Swiss albino mouse induces analgesia modulated by 5-HT1A receptors

Social conflict between mice produces analgesia in the attacked mouse. Both the magnitude and type (opioid or nonopioid) of this analgesia have been related to attack intensity and strain of mouse. In the present study low intensity social conflict (7 bites) did not produce analgesia, whereas high intensity - 30 and 60 bites interactions produced, respectively, short-lasting (5 min) and very short-lasting (1 min) analgesia in Swiss albino mice, when compared with nonaggressive interaction (0 bite). The 30 bites aggressive interaction induced analgesia (AIIA) was not affected by IP injection of either naloxone (5.0 and 7.5 mg/kg) or diazepam (0.5, 1.0, 2.0 and 4.0 mg/kg). However, this attack-induced analgesia was reduced after IP administration of the 5-HT1A agonists, gepirone (0.3 and 3.0 mg/kg) and BAY R 1531 (0.01 mg/kg). These results indicate that the analgesia induced by 30 bites social conflict in Swiss albino mice does not involve opioid and GABA-benzodiazepine (GABA-BZD) mechanisms. In addition, they suggest that high-intensity social conflict activates serotonergic pain modulatory systems that act through 5-HT1A receptors. Copyright (C) 1997 Elsevier B.V.

Ferroelectric ceramic/polymer composite for measuring X-ray intensity in the ortovoltage range

Pyroelectric sensors work as a thermal transducer converting the non-quantified thermal flux into the output measurable quantity of electrical charge, voltage or current. Ferroelectric ceramics and ferroelectric polymers have been extensively used as thermal detectors. More recently the research in the field of pyroelectricity has been concentrated on discovering materials with higher figures of merit (FOM), which means better sensing materials. Composite materials obtained with ferroelectric ceramics embedded in polymer host have received great attention because of their formability, mechanical resistance and the possibility to change their dielectric property varying the volume fraction of ceramic particles. In this work composite films made of modified lead titanate (PZ34) and poly(ether-ether-ketone) (PEEK) were characterized and used as sensing element to measure X-ray intensity in the ortovoltage range (120 - 300 kVp). The sensor response varies from 2.70 V to 0.80 V in the energy fluency range of 6.30 to 37.20 W/m(2). Furthermore the absorbed energy was analyzed as a function of the ionizing energy. The results indicate that the PZ34/PEEK composite with 60/40 vol.% can be useful to monitor X-ray radiation therapy.

Lanthanide-Containing Light-Emitting Organic-Inorganic Hybrids: A Bet on the Future

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Measurement of orthovoltage X-ray intensity with a lithium niobate transducer

A microcontrolled instrument for measuring the energy fluence rate (or intensity) of X-ray pulses in the orthovoltage range of 120 to 300 kV is described. The prototype instrument consists of a pyroelectric sensor, a low-noise highsensitivity current-to-voltage converter, a microcontroller and a digital display. The response of the instrument is nonlinear with the intensity of the radiation. The precision is better than 3%. The equipment is inexpensive, rugged, simple to construct and has good long-term stability. © 2009 Springer-Verlag.

Measurement of Radiant Energy using Pyroelectric Polymer/Ceramic Composite

Monitoring non-ionizing radiant energy is increasingly demanded for many applications such as automobile, biomedical and security system. Thermal type infrared (IR) sensors can operate at room temperature and pyroelectric materials have high sensitivity and accuracy for that application. Working as thermal transducer pyroelectric sensor converts the non-quantified thermal flux into the output measurable quantity of electrical charge, voltage or current. In the present study the composite made of poly(vinylidene fluoride) -PVDF and lead zirconate titanate (PZT) partially recovered with polyaniline (PAni) conductor polymer has been used as sensor element. The pyroelectric coefficient p(T) was obtained by measuring the pyroelectric reversible current, i.e., measuring the thermally stimulated depolarization current (TSDC) after removing all irreversible contribution to the current such as injected charge during polarization of the sample. To analyze the sensing property of the pyroelectric material, the sensor is irradiated by a high power light source (halogen lamp of 250 W) that is chopped providing a modulated radiation. A device assembled in the laboratory is used to change the light intensity sensor, an aluminum strip having openings with diameters ranging from 1 to 10 mm incremented by one millimeter. The sensor element is assembled between two electrodes while its frontal surface is painted black ink to maximize the light absorption. The signal from the sensor is measured by a Lock-In amplifier model SR530 -Stanford Research Systems. The behavior of the output voltage for an input power at several frequencies for PZT-PAni/PVDF (30/ 70 vol%) composite follows the inverse power law (1/ f) and the linearity can be observed in the frequency range used.

The effect of increased light intensity on the aggressive behavior of the Nile tilapia, Oreochromis niloticus (Teleostei: Cichlidae)

Animals show behavioral and physiological changes that emerge in response to environmental perturbations (i.e., emergency life-history stages). In this study, we investigate the effects of light intensity on aggressive encounters and social stability in groups of adult male Nile tilapia, Oreochromis niloticus (Linnaeus, 1758). The study compared the behavior observed under low (280.75 ± 50.60 lx) and high (1394.14 ± 520.32 lx) light intensities, with 12 replicates for each treatment. Adult fish were isolated in 36-L aquaria for 96 hours, and three males were grouped for 11 days in 140-L aquaria. Agonistic behavior was video-recorded (10 min/day) on the 3rd, 5th, 7th, and 9th day to quantify aggressive interactions and social stability. There was an effect of light intensity and day of observation on the total number of agonistic behaviors performed by the fish group. Besides, increased frequency of aggressive interactions (the sum of the four sessions) by the alpha, beta and gamma fish occurred at the higher light intensity. The dominance ranks of the fish remained unchanged across the observation sessions under both the low and high light intensities. We concluded that enhanced light intensity has a cumulative effect that increases the aggressiveness of the Nile tilapia but that this effect is not sufficiently strong to destabilize the social hierarchy.

Transcription of the Hsp30, Hsp70, and Hsp90 heat shock protein genes is modulated by the PalA protein in response to acid pH-sensing in the fungus Aspergillus nidulans

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exercise intensity, but not electrolyte reposition, alters plasmatic cortisol and glucose levels of horses submitted to 30 and 60km distance endurance rides

O presente estudo teve como objetivo comparar os níveis plasmáticos de glicose e cortisol de um grupo de eqüinos atletas submetidos ao esforço de longa duração (enduro eqüestre) em distâncias de 30 e 60km, com velocidades médias de 10 e 15km h-1, respectivamente. Os animais foram aleatoriamente separados em dois grupos, sendo que a um deles foi administrada, por via oral, uma pasta eletrolítica hipertônica antes, durante e após as referidas provas. O outro grupo foi usado como controle. Os resultados das concentrações de cortisol revelaram um aumento significativo, no primeiro momento, em que a intensidade do esforço era maior (15km/h), ou com a continuação deste (30km de distância), no segundo momento, para todos os grupos. Os resultados referentes à concentração de glicose permaneceram constantes durante a prova de 30km; entretanto, nos primeiros 20km da prova de 60km, tais resultados revelaram um aumento significativo no grupo controle, retornando a valores basais no momento subseqüente. A reposição eletrolítica tem a sua importância na manutenção do equilíbrio hidroeletrolítico e ácido básico e, no presente estudo, pode ter contribuído para a manutenção da concentração média de glicose plasmática.

Interaction between breeding habitat and elevation affects prevalence but not infection intensity of Batrachochytrium dendrobatidis in Brazilian anuran assemblages

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Radiação solar em ambiente protegido cultivado com tomateiro nas estações verão-outono do Rio Grande do Sul

O crescimento e desenvolvimento de uma planta dependem da intensidade, qualidade e duração da radiação solar. Por esse fator ser de importância vital às plantas, o presente trabalho objetivou fazer uma avaliação sobre sua variação, bem como sobre a sua disponibilidade no interior do ambiente protegido durante o ciclo do tomateiro nas estações verão-outono em Pelotas, Rio Grande do Sul. O experimento foi conduzido de janeiro a junho de 2003 no Campus da Universidade Federal de Pelotas (latitude 31°52'S; longitude 52°21'W e altitude de 13m), em estufa plástica disposta no sentido Leste-Oeste, com área de 180m². A cultivar utilizada foi Flora-dade, semeada em 24/01/03, transplantada no dia 28/02/03, sendo a última colheita em 12/06/03. Avaliou-se a radiação solar global externa (Rgext) e interna (Rgint), transmitância, radiação fotossinteticamente ativa (RFA) e o albedo da cultura a partir de sensores eletrônicos conectados a um datalloger. Durante o ciclo da cultura, o total de Rgext foi 1161,21MJ m-2, enquanto a Rgint foi 881,85MJ m-2. A Rgint e a RFA apresentaram valores médios diários de 8,5MJ m-2 dia-1 e 3,4MJ m-2 dia-1, respectivamente. A transmitância média da cobertura plástica à radiação solar global foi de 76%. O albedo médio diário da cultura foi 0,23, com albedo de 0,17 nos estádios iniciais, 0,26 no período de máximo crescimento e 0,23 no final do ciclo.

Soil sampling intensity and spatial distribution pattern of soils attributes and corn yield in no-tillage system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)