102 resultados para UNIVERSAL PRIMERS
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
Purpose: To determine whether universal primers alone can deliver similar levels of adhesion of resin cement to zirconia ceramic when compared to their application in conjunction with airborne-particle abrasion.Materials and Methods: Sintered zirconia blocks (N = 160) (Lava, 3M ESPE), (5.25 x 5.25 x 3 mm(3)) were embedded in acrylic resin, polished, and randomly distributed into 16 groups (n = 10 per group), according to the factors "universal primer" (8 levels) and "air-particle abrasion" (2 levels): 1. ctr: control, without application of a universal primer; 2. AP: Alloy Primer; 3. MP: Monobond Plus; 4. MZP: Metal Zirconia Primer; 5. MZ: MZ Primer; 6. Sg: Signum Zirconia Bond; 7. SbU: Singlebond Universal; 8. ZP: Z Prime Plus. The universal primers were also used after air abrasion (A) of zirconia to form the following 8 groups: Ctr-A, AP-A, MP-A, MZP-A, MZ-A, Sg-A, SbU-A, and ZP-A. After ultrasonic cleaning, air abrasion was performed using Al2O3 particles (110 mu m, 2.5 bar, 20 s at 10 mm) in a chairside air-abrasion device. After ultrasonic cleaning again, universal primers were applied according to each manufacturer's recommendation. The resin cement (RelyX ARC, 3M ESPE) was built up incrementally and photo-polymerized on the zirconia surface using a silicone mold (empty set = 3.5, height = 3 mm). All specimens were stored in distilled water (60 days at 37 degrees C) and then subjected to shear bond strength testing (SBS) in a universal testing machine (1 mm/min). On a separate set of zirconia specimens, contact angle measurements were made using the sessile drop technique with a goniometer after the application of universal primers on control and air-abraded zirconia surfaces. Data (MPa) were analyzed using one-way ANOVA, Tukey's test, and Student's t-test (alpha = 0.05).Results: When universal primers were used alone, SbU presented significantly higher mean SBS (19.5 +/- 5.8) that did the other primers (0 to 9.9 +/- 6.6) (p = 0.001). When air abraded, the groups AP-A (14.1 +/- 6.1), MP-A (15.9 +/- 5.4), ZP-A (16.9 +/- 7.3), SG-A (19.1 +/- 2.1), SbU-A (12 +/- 1.5) showed significant differences (p = 0.03). Adhesive performance of all universal primers was enhanced after air abrasion, with the exception of the SbU and MZ primers. After air abrasion, contact angle measurements were lower for the each primer (without air abrasion: 28.9 to 83.9; with air abrasion: 27.1 to 63.0), except for MZP.Conclusion: Air abrasion with 110 mu m Al2O3 followed by universal primer application increased the bond strength of tested resin cement to zirconia, with the exception of SbU and MZ.
Resumo:
Lettuce mottle virus (LeMoV) and dandelion yellow mosaic virus (DaYMV) infect lettuce in South America and Europe, respectively. LeMoV and DaYMV possess isometric particles, occur at low concentrations in plants and have narrow host ranges. Partial genome sequences of both viruses were obtained using purified viral preparations and universal primers for members of the family Sequiviridae. DaYMV and LeMoV sequences were analyzed and showed identity with other members of the family. Universal primers that detect both viruses and specific primers for LeMoV and DaYMV were designed and used in RT-PCR-based diagnostic assays. These results provide the first molecular data on the LeMoV and DaYMV genomes and suggest that LeMoV is a member of the genus Sequivirus, probably distinct from DaYMV.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A semi-nested reverse transcription-polymerase chain reaction (Semi-N-RT-PCR) was developed and used to detect the S glycoprotein gene of infectious bronchitis virus (IBV) strains and to discriminate H120 vaccine strain from other strains. Viral RNA was extracted from the allantoic fluid of chicken embryos and from tissues of chickens experimentally infected with different strains of IBV. Amplification and identification of the viral RNA was performed using two sets of primers complementary to a region of the S glycoprotein gene in the Semi-N-RT-PCR assay. The pair of primers used in the first PCR consisted of universal oligonucleotides flanking a more variable region of S1-S2 gene. The second primer pair was used in the Semi-N-RT-PCR and was comprised of one of the primers from the first universal pair together with either another universal internal oligolucleotide or a oligonucleotide sequence specific for the H120 strain of IBV. The universal primers detected all reference IBV strains and field isolates tested herein. The Semi-N-RT-PCR had high sensitivity and specificity, and was able to differentiate the H120 vaccine strain from other reference IBV strains; including M41 strain. All tissue samples collected from chickens experimentally infected with H120 or M41 strains were positive in the semi-nested RT-PCR using universal primers, while only the H120-infected tissue samples were amplified by the set of primers containing the H120-oligonucleotide. In conclusion, the ability of Semi-N-RT-PCR to detect distinct IBV strains and preliminarily discriminate the vaccine strain (H120) closes a diagnostic gap and offers the opportunity to use comprehensive PCR procedures for the IBV diagnosis.
Resumo:
O LMV ocorre em todo o mundo e é considerado um dos patógenos mais importantes para a cultura da alface. de acordo com a habilidade em contornar os genes de resistência mo1¹ e mo1² encontrados em alface, os isolados de LMV podem ser dividos em dois sub-grupos: LMV-Most, capazes de contornar a resistência propiciada por estes genes e de serem transmitidos pela semente nestas cutivares, e LMV-Common, que não são capazes de causar sintomas nestes cultivares, além de serem transmitidos pela semente somente em cultivares suscetíveis. Para avaliar a ocorrência destes dois tipos de isolados de LMV foram coletadas, durante 2002-2005, amostras de alface com sintomas de mosaico em áreas de produção de alface comercial das regiões de Campinas, Mogi das Cruzes e Bauru no estado de São Paulo. O RNA total foi utilizado para detecção por RT-PCR utilizando-se oligonucleotídeos universais para LMV que amplificam a porção N-terminal variável da capa protéica, localizada no terminal 3´do genoma. As amostras positivas foram analisadas por um segundo primer que amplifica um fragmento da região central (CI-VPg) do genoma viral. Um total de 1362 amostras foram avaliadas, tendo sido detectado o LMV em 504 amostras (37,29%). O LMV-Common prevaleceu em variedades suscetíveis (77,3%). O LMV-Most foi encontrado frequentemente associado a variedades portadoras do gene de tolerância mo1¹. Apesar da existência dos LMV-Most capazes de contornar a resistência em alface, estes não predominam em nossa condições.
Resumo:
A diversidade genética de vírus pertencentes ao gênero Begomovirus em tomateiro (Lycopersicon esculentum Mill) foi analisada em regiões produtoras do Centro-Oeste paulista. No período de janeiro de 2003 a fevereiro de 2004, cento e sessenta e seis amostras de tomate foram coletadas e a presença de begomovírus observada em 60% das amostras, por PCR, utilizando-se oligonucleotídeos universais para o gênero Begomovirus. O sequenciamento direto do produto de PCR de 16 dessas amostras indicou a possível presença do Tomato severe rugose virus (ToSRV), Sida mottle virus (SiMoV-[BR]) e da espécie tentativa Tomato yellow vein streak virus (ToYVSV-[BR]). em duas amostras foi detectada uma possível nova espécie de begomovírus. A presença do ToSRV e do SiMoV ainda não havia sido verificada em tomateiro no estado de São Paulo. Estes resultados indicam a existência de diversidade de espécies de begomovírus infectando o tomateiro nesta região, servindo como um alerta para melhoristas que trabalham na busca de fontes de resistência a esse importante grupo de patógenos.
Resumo:
Symptoms of huanglongbing (HLB) were reported in São Paulo State (SPS), Brazil, in March 2004. In Asia, HLB is caused by 'Candidatus Liberibacterasiaticus'and in Africa by 'Candidatus Liberibacter africanus'. Detection of the liberibacters is based on PCR amplification of their 16S rRNA gene with specific primers. Leaves with blotchy mottle symptoms characteristic of HLB were sampled in several farms of SIPS and tested for the presence of liberibacters. 'Ca. L. asiaticus' was detected in a small number of samples but most samples gave negative PCR results. Therefore, a new HLB pathogen was suspected. Evidence for an SPS-HLB bacterium in symptomatic leaves was obtained by PCR amplification with universal primers for prokaryotic 16S rRNA gene sequences. The amplified 16S rRNA gene was cloned and sequenced. Sequence analysis and phylogeny studies showed that the 16S rRNA gene possessed the oligonucleotide signatures and the secondary loop structure characteristic of the alpha-Proteobacteria, including the liberibacters. The 16S rRNA gene sequence phylogenetic tree showed that the SPS-HLB bacterium clustered within the a-Proteobacteria, the liberibacters being its closest relatives. For these reasons, the SPS-HLB bacterium is considered a member of the genus 'Ca. Liberibacter'. However, while the 16S rRNA gene sequences of 'Ca. L. asiaticus' and 'Ca. L. africanus' had 98-4% similarity, the 16S rRNA gene sequence of the SPS-HLB liberibacter had only 96(.)0% similarity with the 16S rRNA gene sequences of 'Ca. L. asiaticus'or'Ca. L. africanus'. This lower similarity was reflected in the phylogenetic tree, where the SPS-HLB liberibacter did not cluster within the 'Ca. L asiaticus'/'Ca. L. africanus group', but as a separate branch. Within the genus 'Candidatus Liberibacter' and for a given species, the 16S/23S intergenic region does not vary greatly. The intergenic regions of three strains of 'Ca. L. asiaticus', from India, the People's Republic of China and Japan, were found to have identical or almost identical sequences. In contrast, the intergenic regions of the SPS-HLB liberibacter, 'Ca. L. asiaticus' and 'Ca. L. africanus' had quite different sequences, with similarity between 66(.)0 and 79(.)5%. These results confirm that the SPS-HLB liberibacter is a novel species for which the name 'Candidatus Liberibacter americanus' is proposed. Like the African and the Asian liberibacters, the 'American' liberibacter is restricted to the sieve tubes of the citrus host. The liberibacter could also be detected by PCR amplification of the 16S rRNA gene in Diaphorina citri, the psyllid vector of 'Ca. L. asiaticus', suggesting that this psyllid is also a vector of 'Ca. L. americanus' in SPS. 'Ca. L. americanus' was detected in 216 of 218 symptomatic leaf samples from 47 farms in 35 municipalities, while 'Ca. L. asiaticus' was detected in only 4 of the 218 samples, indicating that 'Ca. L. americanus' is the major cause of HLB in SIPS.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: To investigate the adhesive potential of novel zirconia primers and universal adhesives to surface-treated zirconia substrates.Methods: Zirconia bars were manufactured (3.0 mm x 3.0 mm x 9.0 mm) and treated as follows: no treatment (C); air abrasion with 35 mu m alumina particles (S); air abrasion with 30 mu m silica particles using one of two systems (Rocatec or SilJet) and; glazing (G). Groups C and S were subsequentially treated with one of the following primers or adhesives: ZP (Z-Prime Plus), AZ (AZ Primer); MP (Monobond Plus); SU (ScotchBond Universal) and; EA (an Experimental Adhesive). Groups Rocatec and SilJet were silanized prior to cementation. Samples form group G were further etched and silanized. Bars were cemented (Multilink) onto bars of a silicate-based ceramic (3.0 mm x 3.0 mm x 9.0 mm) at 90 degrees angle, thermocycled (2.500 cycles, 5-55 degrees C, 30 s dwell time), and tested in tensile strength test. Failure analysis was performed on fractured specimens to measure the bonding area and crack origin.Results: Specimens from group C did not survive thermocycling, while CMP, CSU and CEA groups survived thermocycling but rendered low values of bond strength. All primers presented a better bond performance after air abrasion with Al2O3 particles. SilJet was similar to Rocatec, both presenting the best bond strength results, along with SMP, SSU and CEA. G promoted intermediate bond strength values. Failure mode was predominately adhesive on zirconia surface combined to cohesive of the luting agent.Conclusions: Universal adhesives (MP, SU, EA) may be a considerable alternative for bonding to zirconia, but air abrasion is still previously required. Air abrasion with silica particles followed by silane application also presented high bond strength values. (C) 2013 Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)