Exigências térmicas de Brevicoryne brassicae e previsão de picos populacionais

O objetivo deste trabalho foi determinar as exigências térmicas do pulgão-da-couve, Brevicoryne brassicae L., Hemiptera: Aphididae, em condições de laboratório e campo, e prever a ocorrência de picos populacionais de adultos, por meio de um modelo de graus-dia. em laboratório, os experimentos foram conduzidos em câmaras climatizadas reguladas a 15, 20, 25, 27 e 30ºC, obtendo-se o limite térmico inferior de desenvolvimento (Tb = 4,5ºC) e a constante térmica (K = 176,1 graus-dia). Na determinação das exigências térmicas sob condições de campo, realizaram-se seis experimentos, a partir dos quais obteve-se o tempo médio de desenvolvimento de ninfas e a temperatura média ambiental. Os resultados estimados de Tb e K foram 3,5ºC e 180,0 graus-dia, respectivamente. Os resultados de Tb e K obtidos em laboratório possibilitam prever com maior precisão a ocorrência de adultos de B. brassicae do que os resultados de Tb e K determinados a partir de experimentos em campo.

Mean surface temperature prediction models for broiler chickens-a study of sensible heat flow

Body surface temperature can be used to evaluate thermal equilibrium in animals. The bodies of broiler chickens, like those of all birds, are partially covered by feathers. Thus, the heat flow at the boundary layer between broilers' bodies and the environment differs between feathered and featherless areas. The aim of this investigation was to use linear regression models incorporating environmental parameters and age to predict the surface temperatures of the feathered and featherless areas of broiler chickens. The trial was conducted in a climate chamber, and 576 broilers were distributed in two groups. In the first trial, 288 broilers were monitored after exposure to comfortable or stressful conditions during a 6-week rearing period. Another 288 broilers were measured under the same conditions to test the predictive power of the models. Sensible heat flow was calculated, and for the regions covered by feathers, sensible heat flow was predicted based on the estimated surface temperatures. The surface temperatures of the feathered and featherless areas can be predicted based on air, black globe or operative temperatures. According to the sensible heat flow model, the broilers' ability to maintain thermal equilibrium by convection and radiation decreased during the rearing period. Sensible heat flow estimated based on estimated surface temperatures can be used to predict animal responses to comfortable and stressful conditions. © 2013 ISB.

Response surface models to predict broiler performance and applications for economic analysis

A study was carried out to elaborate response surface models using broiler performance data recovered from literature in order to predict performance and elaborate economic analyses. Nineteen studies published between 1995 and 2005 were retrieved using the systematic literature review method. Weight gain and feed conversion data were collected from eight studies that fulfilled the pre-established inclusion criteria, and a response surface model was adjusted using crude protein, environmental temperature, and age as independent variables. The models produced for weight gain (r² = 0.93) and feed conversion (r² = 0.85) were accurate, precise, and not biased. Protein levels, environmental temperature and age showed linear and quadratic effects on weight gain and feed conversion. There was no interaction between protein level and environmental temperature. Age and crude protein showed interaction for weight gain and feed conversion, whereas interaction between age and temperature was detected only for weight gain. It was possible to perform economic analyses to determine maximum profit as a function of the variables that were included in the model. It was concluded that the response surface models are effective to predict the performance of broiler chickens and allow the elaboration of economic analyses to optimize profit.

Magnetic field effects on the conductivity of organic bipolar and unipolar devices at room temperature

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photo-induced electron trapping in indirect bandgap AlxGa1-xAs : Si at low temperature

A variation of photoconductivity excitation with wavelength is applied to Si-doped Al0.56Ga0.44As (indirect bandgap material) for a wide range of temperature. The lower the temperature the lower the photocurrent below 70 K. In the range 13-30 K there is a decrease in the photoconductivity spectrum slightly above the bandgap transition energy, followed by another increase in the conductivity. We interpret these results in the light of existing models and confirm the trapping by the X-valley effective mass state. which is responsible for attenuation of persistent photoconductivity below 70 K. A DX0 intermediate state which has non-negligible lifetime is proposed as responsible for the decrease in the photoconductivity with about 561 nm of wavelength of exciting light, in the investigated 13-30 g range.

Critical behavior at edge singularities in one-dimensional spin models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Thermophysical Properties of Lemon Juice as Affected by Temperature and Water Content

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Application of abrupt cut-off models in the analysis of the capacitance spectra of conjugated polymer devices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photoluminescence of barium titanate and barium zirconate in multilayer disordered thin films at room temperature

The emission of wide band photoluminescence showed a synergic effect on barium zirconate and barium titanate thin films in alternate multilayer system at room temperature by 488 nm exiting wavelength. The thin films obtained by spin-coating were annealed at 350, 450, and 550 degrees C for 2 h. The X-ray patterns revealed the complete separation among the BaTiO3 and BaZrO3 phases in the adjacent films. Visible and intense photoluminescence was governed by BaZrO3 thin films in the multilayer system. Quantum mechanics calculations were used in order to simulate ordered and disordered thin films structures. The disordered models, which were built by using the displacement of formers and modifier networks, showed a different symmetry in each system, which is in accordance with experimental photoluminescence emission, thus allowing to establish a correlation among the structural and optical properties of these multilayered systems.

Germination response of Hylocereus setaceus (Salm-Dyck ex DC: ) Ralf Bauer (Cactaceae) seeds to temperature and reduced water potentials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Renormalization-group calculation of excitation properties for impurity models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A DFT rationalization of the room temperature photoluminescence of Li2TiSiO5

Li2TiSiO5 powders were synthesized by the polymeric precursor method. The calcination temperatures were progressively increased until the complete crystallization of the phase occurring at 870 degreesC. For the first time, a strong photoluminescence was measured at room temperature with a 488 nm excitation wavelength for the non-crystalline samples. This photoluminescence in disordered phases has been interpreted by means of high-level quantum mechanical calculations based on density functional theory. Two periodic models have been used to represent the crystalline and disordered powders. They allowed to calculate electronic properties consistent with experimental data and to explain the relations between photoluminescence and structural disorder. (C) 2004 Elsevier B.V. All rights reserved.

Visible PL phenomenon at room temperature in disordered structure of SrWO4 powder

The SrWO4 (SWO) powders were synthesized by the polymeric precursor method and annealed at different temperatures. The SWO structure was obtained by X-ray diffraction and the corresponding photoluminescence (PL) spectra was measured. The PL results reveal that the structural order-disorder degree in the SWO lattice influences in the PL emission intensity. Only the structurally order-disordered samples present broad and intense PL band in the visible range. To understand the origin of this phenomenon, we performed quantum-mechanical calculations with crystalline and order-disordered SWO periodic models. Their electronic structures were analyzed in terms of band structure. The appearance of localized levels in the band gap of the order-disordered structure was evidenced and is a favorable condition for the intense PL to occur.

Temperature and water content influence on thermophysical properties of coffee extract

Specific heat, thermal conductivity, thermal diffusivity, and density of coffee extract were experimentally determined in the range of 0.49 to 0.90 (wet basis) water content and at temperatures varying from 30 to 82 degreesC. Thermal conductivity and specific heat were measured by means of the same apparatus- a cell constituted of two concentric cylinders - operating at steady and unsteady state, respectively. The thermal diffusivity was measured by the well-known Dickerson's method and density was determined by picnometry. The results obtained were used to derive mathematical models for predicting these properties as a function of concentration and temperature.

Therapeutic and pathogenetic animal models for Dolichos pruriens

The therapeutic and pathogenetic effects of Dolichos pruriens were evaluated using experimental models in rats. In the therapeutic experiment Wistar rats were housed in a heated environment (25 +/- 3 degrees C) to induce itch, and treated with ascending potencies D. pruriens (6 cH, 9 cH, 12 cH and 30 cH), each for 10 days. The positive control group received vehicle (ethanol 30% in water). The negative control group received no treatment and were kept at a standard temperature.In the pathogenetic experiment, all animals were kept at a temperature of 20+/-3 degrees C and treated for 30 consecutive days with D. pruriens 6 or 30 cH, or ethanol vehicle, or no treatment. The experiments were performed blind.The statistical analysis used Bartlett's test, followed by ANOVA/Tuckey-Krammer or Kruskal-Wallis/Dunn. The results point to the existence of therapeutic effects, with inhibition of the itching, skin lesions and fur thinning produced by heat, more evident in later observations, with the 9 12, and 30 cH potencies (Kruskal-Wallis/Dunn; P = 0.001). No changes were observed in the other parameters, such as open field activity and laterality of the itching. In the pathogenetic experiment, no changes were observed in any parameters examined. We conclude that the proposed experimental model demonstrates the therapeutic effect of D. pruriens, but not its pathogenetic effects.