Old beagle dogs have lower faecal concentrations of some fermentation products and lower peripheral lymphocyte counts than young adult beagles

The effects of age on microbiota composition, gut fermentation end-product formation and peripheral lymphocyte numbers were compared between old and young adult Beagle dogs fed four kibble diets differing in yeast cell wall contents. The experiment had a double 4 x 4 Latin square design, one with four mature dogs (4 years old) and the other with four old dogs (10 years old), with four replicates (diets) per dog. In each period a 15d adaptation period preceded a 5d total collection of faeces for the digestibility trial. on day 21, fresh faecal samples were collected for the determination of bacterial enumeration, pH, biogenic amine and short-chain fatty acid. Flow cytometry was used for immunophenotypic evaluation. Dogs were fed four kibble diets with similar composition with 0, 0.15, 0.30 and 0.45% of yeast cell wall (as-fed), respectively. Data were evaluated using general linear models of Statistical Analysis Systems statistical software (P<0.05). No evidence of a difference in faecal bacteria counts between ages was found (total aerobes, total anaerobes, Bifidobacterium, Lactobacillus, Clostridium and Escherichia coli: P. 0.15). Faecal concentrations of butyrate, histamine, agmatine and spermine were lower (P <= 0.05) and faecal pH was higher (P=0.03) in older dogs than in mature adult dogs, suggesting an alteration in bacterial metabolic activity, or in the rate of intestinal absorption of these compounds. Concentrations of T-lymphocytes, T-cytotoxic lymphocytes and B-lymphocytes were also lower (P <= 0.01) in older dogs than in mature adult dogs. The study confirmed alterations in peripheral lymphocytes and revealed a reduced concentration of some fermentation end products in the colon of old dogs.

Comparison of non-linear growth models to describe the growth curve in West African Dwarf sheep

The objectives of this study were to compare the goodness of fit of four non-linear growth models, i.e. Brody, Gompertz, Logistic and Von Bertalanffy, in West African Dwarf (WAD) sheep. A total of 5274 monthly weight records from birth up to 180 days of age from 889 lambs, collected during 2001 to 2004 in Betecoucou breeding farm in Benin were used. In the preliminary analysis, the General Linear Model Procedure of the Statistical Analysis Systems Institute was applied to the dataset to identify the significant effects of the sex of lamb (male and female), type of birth (single and twin), season of birth (rainy season and dry season), parity of dam (1, 2 and 3) and year of birth (2001, 2002, 2003 and 2004) on the observed birth weight and monthly weight up to 6 months of age. The models parameters (A, B and k), coefficient of determination (112), mean square error (MSE) were calculated using language of technical computing package Matlab(R), 2006. The mean values of A, B and k were substituted into each model to calculate the corresponding Akaike's Information Criterion (AIC). Among the four growth functions, the Brody model has been selected for its accuracy of fit according to the higher R(2), lower MSE and A/C Finally, the parameters A, B and k were adjusted in Matlab(R) 2006 for the sex of lamb, year of birth, season of birth, birth type and the parity of ewe, providing a specific slope of the Brody growth curve. The results of this study suggest that Brody model can be useful for WAD sheep breeding in Betecoucou farm conditions through growth monitoring.

Avaliação da espectrometria de absorção atômica com nebulização térmica em tubo aquecido em chama (TS-FF-AAS) para determinação de Cd, Cu, Pb e Zn em álcool combustível e óleo diesel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of Implant Inclination Associated With Mandibular Class I Removable Partial Denture

The aim of this study was to use two-dimensional finite element method to evaluate the displacement and stress distribution transmitted by a distal extension removable partial denture (DERPD) associated with an implant placed at different inclinations (0, 5, 15, and 30 degrees) in the second molar region of the edentulous mandible ridge. Six hemimandibular models were created: model A, only with the presence of the natural tooth 33; model B, similar to model A, with the presence of a conventional DERPD replacing the missing teeth; model C, similar to the previous model, with a straight implant (0 degrees) in the distal region of the ridge, under the denture base; model D, similar to model C, with the implant angled at 5 degrees in the mesial direction; model E, similar to model C, with the implant angled at 15 degrees in the mesial direction; and model F, similar to ME, with the implant angled at 30 degrees in the mesial direction. The models were created with the use of the AutoCAD 2000 program (Autodesk, Inc, San Rafael, CA) and processed for finite element analysis by the ANSYS 8.0 program (Swanson Analysis Systems, Houston, PA). The force applied was vertical of 50 N on each cusp tip. The results showed that the introduction of the RPD overloaded the supporting structures of the RPD and that the introduction of the implant helped to relieve the stresses of the mucosa alveolar, cortical bone, and trabecular bone. The best stress distribution occurred in model D with the implant angled at 5 degrees. The use of an implant as a support decreased the displacement of alveolar mucosa for all inclinations simulated. The stress distribution transmitted by the DERPD to the supporting structures was improved by the use of straight or slightly inclined implants. According to the displacement analysis and von Mises stress, it could be expected that straight or slightly inclined implants do not represent biomechanical risks to use.

Estrutura e composição da ictiofauna de riachos do rio Paranapanema, Sudeste e Sul do Brasil

Foram amostrados 17 trechos de riachos com 100 m de extensão, todos de ordem igual ou menor a três, ao longo de ambas as margens do canal principal do Rio Paranapanema, SP e PR. O ponto médio de cada trecho foi georreferenciado via satélite com receptor GPS e o uso de metodologia padronizada de coleta de dados ambientais e peixes (baseada principalmente na pesca elétrica), possibilitou a obtenção das seguintes informações em cada local: 1) composição taxonômica da ictiofauna e contribuição, em termos de número de indivíduos e biomassa, de cada espécie para a ictiofauna local como um todo; 2) documentação fotográfica de espécimes representativos de cada espécie coletada com sua coloração natural; 3) descrição de cada ambiente coletado, com ilustrações fotográficas coloridas, e seus principais parâmetros bióticos e abióticos. No total foram coletados 3.683 exemplares, pertencentes a seis ordens, 16 famílias, 37 gêneros e 52 espécies, com biomassa total de 16,8 kg. Das espécies coletadas, aproximadamente 36% pertencem a ordem Siluriformes, 36% a Characiformes, 11% a Gymnotiformes, 10% a Perciformes, 4% a Cyprinodontiformes e 2% a Synbranchiformes. As espécies mais abundantes em termos de número de indivíduos foram Astyanax altiparanae (15,2%) e Astyanax sp. 1 (12,3%); aquelas com maior biomassa foram A. altiparanae (28%) e Geophagus brasiliensis (13%). A composição da ictiocenose em termos de abundância e biomassa por família indica a predominância expressiva de Characidae, seguida por Loricariidae, Pimelodidae e Cichlidae. Dentre os trechos amostrados, o trecho 14 (24 espécies) e o 13 (cinco espécies), apresentaram a maior e a menor riqueza em espécies, respectivamente, coincidindo com os valores obtidos para o índice de diversidade específica de Shannon-Wienner (H´= 0,99 e 0,32, respectivamente). A riqueza média encontrada foi de 11 espécies por trecho de riacho. Na estimativa de riqueza por extrapolação para o conjunto total de riachos amostrados na bacia do rio Paranapanema, obtivemos um valor de 69 espécies (erro padrão igual a quatro) indicando ser necessário um esforço amostral adicional moderado para atingir a assíntota da curva. Das 52 espécies coletadas, oito (aproximadamente 15% do total) são seguramente novas, cinco (aproximadamente 10% do total) possuem status taxonômico ainda indefinido, enquanto outras três (aproximadamente 6% do total) são espécies introduzidas. Analisando a estrutura trófica e espacial da ictiocenose estudada, as 10 espécies numericamente dominantes nos riachos estudados dividem-se, em ordem decrescente de importância numérica, em quatro guildas: onívoros nectônicos; invertívoros bentônicos; perifitívoros; e onívoros bentônicos. Uma chave de identificação para todas as espécies de peixes coletadas durante este estudo é fornecida ao final deste trabalho.

Estrutura e composição da ictiofauna de riachos da bacia do Rio Grande no estado de São Paulo, sudeste do Brasil

O ponto médio de cada trecho foi georreferenciado via satélite com receptor GPS e o uso de metodologia padronizada de coleta de dados ambientais e peixes (baseada principalmente na pesca elétrica), possibilitou a obtenção das seguintes informações em cada local: 1) composição taxonômica da ictiofauna e contribuição, em termos de número de indivíduos e biomassa, de cada espécie para a ictiofauna local como um todo; 2) documentação fotográfica de espécimes representativos de cada espécie coletada com sua coloração natural; 3) descrição de cada ambiente coletado, com ilustrações fotográficas coloridas, e seus principais parâmetros bióticos e abióticos. No total foram coletados 3.070 exemplares, pertencentes a seis ordens, 18 famílias, 44 gêneros e 64 espécies, com biomassa total de 14,3 kg. Das espécies coletadas, aproximadamente 50% pertencem a ordem Characiformes, 26,5% a Siluriformes, 11% a Perciformes, 6% a Gymnotiformes, 5% a Cyprinodontiformes e 1,5% a Synbranchiformes. As espécies mais abundantes em termos de número de indivíduos foram Astyanax altiparanae (17,4%) e Hypostomus ancistroides (9%); aquelas com maior biomassa foram A. altiparanae (35%) e Geophagus brasiliensis (9%). em termos de abundância e biomassa por família, a composição da fauna de peixes estudada indica a predominância expressiva de Characidae, seguida por Loricariidae e Cichlidae. Dentre os trechos amostrados, o trecho SG6 (26 espécies) e o PG4 (três espécies), apresentaram a maior e a menor riqueza em espécies, respectivamente, coincidindo com os valores obtidos para o índice de diversidade específica de Shannon-Wiener (H'= 1,08 e 0,26, respectivamente). A riqueza média encontrada foi de 12 espécies por trecho de riacho. Na estimativa de riqueza por extrapolação para o conjunto total de riachos amostrados na bacia do Rio Grande, obtivemos um valor de 93 espécies (erro padrão igual a três) indicando ser necessário um esforço amostral adicional moderado para atingir a assíntota da curva. Das 64 espécies coletadas, quatro (aproximadamente 6% do total) são seguramente novas, sete (aproximadamente 11% do total) possuem status taxonômico ainda indefinido, enquanto outras duas (aproximadamente 3% do total) são espécies certamente introduzidas. Analisando a estrutura trófica e espacial da ictiofauna estudada as 10 espécies numericamente dominantes nos riachos amostrados dividem-se, com base em dados de literatura, em ordem decrescente de importância numérica, em cinco guildas: onívoros nectônicos; invertívoros bentônicos; perifitívoros; algívoros e onívoros bentônicos. Uma chave de identificação para todas as espécies de peixes coletadas durante este estudo é fornecida ao final deste trabalho.

Colorimetric determination of ambient ozone using indigo blue droplet

A simple and sensitive method based on a liquid droplet is described for the measurement of atmospheric ozone. A 30 μL drop of indigo blue solution is suspended in a flowing-air sampling stream. The ozone collected reacts with the indigo solution resulting in its decolorization. The colorimetric sensor is composed of two optical fibers and the source of monochromatic light was a red LED (625 nm). The calibration curve was constructed with ozone standard concentrations ranging from 37 - 123 ppbv. The detection limit achieved was 7.3 ppbv. The method considered here showed itself to be easy to apply with a fast response and a total analysis time of only 5 minutes.

Avaliação da desadaptação e microdureza superficial de quatro resinas acrílicas para base de dentaduras utilizando métodos de polimerização e armazenagem em água

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do formato do rebordo alveolar na distribuição interna das tensões em prótese parcial removível dento-implantossuportada

Pós-graduação em Odontologia - FOA

Efeito da adição de moléculas anfifílicas na formação de filmes Langmuir e Langmuir-Blodgett de derivados alquilados do politiofeno: aplicação em sensores

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development of a method for sampling and determination of corrosion inhibitors in modified atmospheres

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento e validação de uma técnica quantitativa de análise de imagem para avaliação do teste do cometa corado pela prata

The comet assay is a method of DNA damage analysis widely used to quantify oxidative damage, crosslinks of DNA, apoptosis and genotoxicity of chemicals substances as chemical, pharmaceuticals, agrochemicals products, among others. This technique is suitable to detect DNA strand breaks, alkali-labile sites and incomplete excision repair sites and is based on the migration of DNA fragments by microeletroforesis, DNA migrates for the anode forming a “tail”, and the formed image has the appearance of a comet. The slides can be stained with fluorescence or silver, having differences in the microscopy type used for the analysis and the possibility of storage of the slides, moreover, the first one is a stained-method with more difficulties of accomplishment. The image analysis can be performed by a visual way, however, there is a disadvantage as the subjectivity on the results, that can be minimized by an automated method of digital analysis. This process was studied in this report with the aim to perceive the validation of the digital analysis turning it a quantitative method with larger reproductibility, minimizing the variability and imprecision due to the subjective analysis. For this validation we selected 50 comets photographed in a standardized way and printed, afterwards, pictures were submitted to three experienced appraisers, who quantified them manually. Later, the images were processed by free software ImageJ 1.38x, printed and quantified manually by the same appraisers. The intraclass correlation was higher to comet measures after image processing. Following, an algorithm of automated digital analysis from the measures of the comet was developed; the values obtained were compared with those 12 estimated manually after the processing resulting high correlation among the measures. The use of image analysis systems increases ...(Complete abstract click electronic access below)

Rapid determination of 12 antibiotics and caffeine in sewage and bioreactor effluent by online column-switching liquid chromatography/tandem mass spectrometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optimization analysis of dual-purpose systems

This paper aims to analyze dual-purpose systems focusing the total cost optimization; a superstructure is proposed to present cogeneration systems and desalination technologies alternatives for the synthesis process. The superstructure consists of excluding components, gas turbines or conventional steam generators with excluding alternatives of supplying fuel for each combustion system. Also, backpressure or condensing/extraction steam turbine for supplying process steam could be selected. Finally one desalination unit chosen between electrically-driven or steam-driven reverse osmosis. multi-effect and multistage flash should be included. The analysis herein performed is based on energy and mass conservation equations, as well as the technological limiting equation of equipment. The results for ten different commercial gas turbines revealed that electrically-driven reverse osmosis was always chosen together with both natural gas and gasified biomass gas turbines. (C) 2009 Elsevier B.V. All rights reserved.

Tensile bond strength of self-etching versus total-etching adhesive systems under different dentinal substrate conditions

The use of acid etchants to produce surface demineralization and collagen network exposure, allowing adhesive monomers interdiffusion and consequently the formation of a hybrid layer, has been considered the most efficient mechanism of dentin bonding. The aim of this study was to compare the tensile bond strength to dentin of three adhesive systems, two self-etching ones (Clearfil SE Bond - CSEB and One Up Bond F - OUBF) and one total-etching one (Single Bond - SB), under three dentinal substrate conditions (wet, dry and re-wet). Ninety human, freshly extracted third molars were sectioned at the occlusal surface to remove enamel and to form a flat dentin wall. The specimens were restored with composite resin (Filtek Z250) and submitted to tensile bond strength testing (TBS) in an MTS 810. The data were submitted to two-way ANOVA and Tukey's test (p = 0.05). Wet dentin presented the highest TBS values for SB and CSEB. Dry dentin and re-wet produced significantly lower TBS values when using SB. OUBF was not affected by the different conditions of the dentin substrate, producing similar TBS values regardless of the surface pretreatments.