Clinical Viability of Immediate Loading of Dental Implants: Part I-Factors for Success

Two-stage procedure for dental implants presents corroborated clinical success over 40 years. The evolution of surgical techniques, development of diagnostic methods, knowledge about tissue biology, and quality of implants regarding design and surface supported studies with I surgical stage followed by immediate prosthesis placement. However, several factors influence the treatment success with immediate loading. SO, this Study aimed to evaluate some factors regarding the success and characteristics of implants and patients.

Craniofacial Implants Success in Facial Rehabilitation

The use of craniofacial implants is an effective treatment for patients with deformities, burns, and cancer sequelae. The sites with the most successful implants are the auricular, nasal, and orbital regions. Furthermore, other factors can affect the implant longevity such as irradiated area, surgical technique, bone quality and quantity, macrostructure and microstructure of the implant, maintenance, and systemic factors.

Success rate of immediate nonfunctional loaded single-tooth implants: Immediate versus delayed implantation

Purpose: The aim of this study was to evaluate the success rate of maxillary immediate nonfunctional single-tooth loaded implants used into fresh extraction sites (immediate placement condition) or healed ridge (delayed placement condition).Materials and Methods: Eighty-two dental implants were placed in the maxilla of 64 consecutive patients from Private practice office and from a specialization course in Implantology. Forty-six implants were inserted under immediate placement condition, and 36 were inserted under delayed placement condition. The criteria used to evaluate success rate were those previously described by Albrektsson and Zarb (Int J Prosthodont 1993;6: 95-105), and follow-up period ranged from 18.0 to 39.7 months.Results: Seventy-nine implants fulfilled the success rate criteria (96.3%). Moreover, differences concerning implantation condition were not significant (P = 0.33, Qui-square test): three of the failed implants were from immediate placement group (success rate of 93.5%), and none was from delayed placement group (success rate of 100.0%).Conclusion: In the present sample, no statistically significant differences were detected for immediate nonfunctional single-tooth loaded implants under immediate placement condition in comparison with those inserted under delayed placement condition; both protocols had high success rate in maxillary incisors, canines, and premolars areas.

Cryptic sexual populations account for genetic diversity and ecological success in a widely distributed, asexual fungus-growing ant

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest deprivation and mating success in Nile tilapia (Teleostei: Cichlidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nest location, clutch size and nest success in the Scarlet Ibis Eudocimus ruber

Breeding success and nest-site characteristics were studied during the 1996-1997 breeding season in a colony of Scarlet Ibises Eudocimus ruber in south-eastern Brazil to test the hypothesis that nest-site characteristics and clutch size affect nest success. Two nesting pulses produced young, the earlier being more successful. Predation accounted for most failures during the first pulse, wind destruction during the second. A third pulse with few nests produced no young. Adult Ibises abandoned nests when they lost sight of other incubating birds. Logistic regression analysis indicated that nest success during the first pulse was positively related to clutch size, number of nests in the nest tree and in the nearest tree, and negatively to the distance to the nearest neighbour. During the second pulse there were significant negative associations between success, nest height and distance to the fourth nearest nest, and a positive association between success and nest cover. The results agree with the 'selfish herd' hypothesis, indicating that nest aggregation may increase breeding success, but the nest-site characteristics affecting success can differ over the course of one breeding season.

Influence of management and environmental factors on mating success of Africanized queen honey bees

Environmental factors and management techniques were evaluated in São Paulo, Brazil, for enhanced production of Africanized queen honey bees. Queens were reared by the Doolittle method; 12 breeder, 6 cell-builder, and 36 3-frame nucleus colonies were used. Nine groups of four virgin Africanized queen honey bees were subjected to the following treatments: queens were either 1-2, 3-4 or 5-6 days old and were released into mating nuclei containing either capped brood, uncapped brood or no brood. This was repeated sixteen times between August 1990 and August 1992. Seven repetitions occurred during nectar flow periods and nine repetitions occurred during nectar-dearth periods. Overall, 59% of 576 queens were successfully introduced and mated. The best results (93% success) were obtained during nectar flows, with 3- to 4-day-old queens released into nuclei containing capped brood. During nectar dearths the best mating success came from queens introduced into broodless nuclei (63%), the age of the queen did not influence mating success. Mating success decreased when wind velocity increased; this was the only significant meteorological effect found.

Effect of type of cuttings and indolbutyric acid on the rooting of rose (Rosa sp. 'Red success') leafy cuttings during two seasons

The objectives of this study were to evaluate the effect of type of cuttings (apical, intermediate and basal) and different concentrations of IBA (indole-3-butyric acid) on rooting of Red success rose (Rosa sp.) leafy cuttings, during two season of cuttings collection (summer and winter). The investigation was carried out in the farm Irmaos Van Schaik in Holambra-SP, Brazil, from February to April and August to October/1993. The experimental design was a randomized block in a factorial arrangement. It consisted of 12 treatments (3 types of cuttings combined with IBA powder in 4 different concentrations - 0, 1000, 2000 and 4000 ppm) with 3 replicates during 2 seasons. The investigation permitted the following conclusions: the apical and intermediate cuttings showed better results in general when compared to the basal ones in both seasons; the average rooting at the transplanting time were 76%, 70% and 47% (summer) and 80%, 69% and 33% (winter) for apical, intermediate and basal cuttings, respectively; the utilization of IBA did not stimulate rooting. The average rooting for the control cuttings reached 85% (summer) and 78% (winter), regardless the type of cuttings.

Implantation failures: Success of assisted hatching with quarter-laser zona thinning

Implantation failure after IVF is one of the factors associated with a reduced chance of pregnancy for some patients. Assisted hatching methodologies are designed to facilitate the embryo's escape from the zona pellucida, and this strategy has been suggested as a means of improving pregnancy rates in patients with previous implantation failure. The aim of this prospective and randomized study was to evaluate the efficacy of quarter-laser zona thinning assisted hatching (qLZT-AH) in improving the implantation of embryos in patients with previous implantation failure. A total of 150 patients with a history of previous implantation failure were treated with intracytoplasmic sperm injection, and allocated into two groups: group 1, only one previous implantation failure, and group 2, repeated implantation failures. The patients in each group were randomized at the time of embryo transfer into a control group (no qLZT-AH) or experimental group where qLZT-AH was performed. For patients with repeated implantation failures, the implantation rate in those who received laser-thinned embryos was significantly higher (P=0.02) than in those whose embryos were not laser-thinned (10.9 and 2.6% respectively). However, this difference was not observed in patients who presented with only one previous implantation failure. The data demonstrate that qLZT-AH is an effective strategy for improving the implantation of embryos in patients with repeated implantation failures.

How the delphi and AHP methods are aiding to define the critical success factors priorities in a digital factory project implementation

Digital factory is a concept that offers a collaborative approach to enhance product and production engineering processes through simulation. Products, processes and resources are modeled to be used to develop and test the product conception and manufacturing processes, before their use in the real factory. The purpose of this paper is to present the steps to identify the Critical Success Factors (CSF) priorities in a digital factory project implementation in a Brazilian company and how the Delphi and AHP Methods are aiding to identify these CSF priorities. Copyright © 2008 SAE International.

Predicting academic success of engineering students in technical drawing from working memory

Tests on spatial aptitude, in particular Visualization, have been shown to be efficient predictors of the academic performance of Technical Drawing stu-dents. It has recently been found that Spatial Working Memory (a construct defined as the ability to perform tasks with a figurative content that require si-multaneous storage and transformation of information) is strongly associated with Visualization. In the present study we analyze the predictive efficiency of a bat-tery of tests that included tests on Visualization, SpatialWorking Memory, Spatial Short-term Memory and Executive Function on a sample of first year engineering students. The results show that Spatial Working Memory (SWM) is the most important predictor of academic success in Technical Drawing. In our view, SWM tests can be useful for detecting as early as possible those students who will require more attention and support in the teaching-learning process.

A success in Toxinology translational research in Brazil: Bridging the gap

Basic research is fundamental for discovering potential diagnostic and therapeutic tools, including drugs, vaccines and new diagnostic techniques. On this basis, diagnosis and treatment methods for many diseases have been developed. Presently, discovering new candidate molecules and testing them in animals are relatively easy tasks that require modest resources and responsibility. However, crossing the animal-to-human barrier is still a great challenge that most researchers tend to avoid. Thus, bridging this current gap between clinical and basic research must be encouraged and elucidated in training programmes for health professionals. This project clearly shows the challenges faced by a group of Brazilian researchers who, after discovering a new fibrin sealant through 20 years of painstaking basic work, insisted on having the product applied clinically. The Brazilian government has recently become aware of this challenge and has accordingly defined the product as strategic to the public health of the country. Thus, in addition to financing research and development laboratories, resources were invested in clinical trials and in the development of a virtual platform termed the Virtual System to Support Clinical Research (SAVPC); this platform imparts speed, reliability and visibility to advances in product development, fostering interactions among sponsors, physicians, students and, ultimately, the research subjects themselves. This pioneering project may become a future model for other public institutions in Brazil, principally in overcoming neglected diseases, which unfortunately continue to afflict this tropical country. © 2013 Elsevier Ltd.

The success rate of immediate implant placement of mandibular molars: A clinical and radiographic retrospective evaluation between 2 and 8 years

Background: Dental implants, indicated for re-establishing both mastigatory and aesthetic functions, can be placed in the sockets immediately after tooth extraction. Most studies investigate the anterior and upper regions of the dental arch, whereas few examine longitudinal appraisal of immediate implant installation in the mandibular molar region. Objective: The aim of this retrospective study was to evaluate the success rate of immediate dental implants placement in mandibular molars within a follow-up period as long as 8 years. Materials and methods: Seventy-four mandibular molar implants after non-traumatic tooth extraction between 2002 and 2008 were examined in the study. All implants were evaluated radiographically immediately after prosthesis placement, 1 year after implantation, and by the end of the experimental period, in 2010. Clinical evaluation was done according to [Albrektsson et al. (1986) The International Journal of Oral & Maxillofacial Implants, 1, 11-25] success criteria for marginal bone loss. The mean bone losses, calculated as the difference between the final evaluation measures and those taken by the end of the first year of implant, were compared using Kruskal-Wallis test with a significance level of 5%. Results: All implants presented clinical and radiographic stable conditions, that is, 100% success rate. Significant bone loss was not found between final evaluation and that of the first functional year (P > 0.05). Conclusion: Immediate implant placement of mandibular molars proved to be a viable surgical treatment given the high success rate up to 8 years after implantation. © 2012 John Wiley & Sons A/S.

Platelet-Rich Plasma And Chronic Wounds: Remaining Fibronectin May Influence Matrix Remodeling And Regeneration Success

Background: Platelet-rich plasma has been largely used as a therapeutic option for the treatment of chronic wounds of different etiologies. The enhanced regeneration observed after the use of platelet-rich plasma has been systematically attributed to the growth factors that are present inside platelets' granules. Aim: We hypothesize that the remaining plasma and platelet-bound fibronectin may act as a further bioactive protein in platelet-rich plasma preparations. Methods: Recent reports were analyzed and presented as direct evidences of this hypotheses. Results: Fibronectin may directly influence the extracellular matrix remodeling during wound repair. This effect is probably through matrix metalloproteinase expression, thus exerting an extra effect on chronic wound regeneration. Conclusions: Physicians should be well aware of the possible fibronectin-induced effects in their future endeavors with PRP in chronic wound treatment. © 2013 International Society for Cellular Therapy.