Effect of annealing atmosphere on phase formation and electrical characteristics of bismuth ferrite thin films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ferroelectric and microstructural characteristics of SrBi2Ta2O9 thin films crystallized by the rapid thermal annealing process

Ferroelectric SrBi2Ta2O9 thin films on Pt/Ti/SiO2/Si were successfully synthesized by the modified polymeric precursor method. The films were deposited by spin coating and crystallized by rapid thermal annealing in a halogen lamp furnace, followed by postannealing at temperatures ranging from 700 degreesC to 800 degreesC in an oxygen atmosphere. Microstructural and phase evaluations were followed by x-ray diffraction and atomic force microscopy. The films displayed spherical grain structures with a superficial roughness of approximately 3-6 nm. The dielectric constant values were 121 and 248 for films treated at 700 degreesC and 800 degreesC, respectively. The P-E curve showed a voltage shift toward the positive side, which was attributed to crystallization under the halogen illumination. The remanent polarization (2P(r)) and coercive field (E-c) were 7.1 muC/cm(2) and 113 kV/cm, and 18.8 muC/cm(2) and 93 kV/cm for the films treated at 700 degreesC and 800 degreesC, respectively. (C) 2001 American Institute of Physics.

Electron transfer between adjacent layers in self-assembled films

A simple model of electron transfer is adapted to explain fluorescence quenching in self-assembled films of poly( p-phenylene vinylene) (PPV) alternating with poly(thiophene acetic acid) (PTAA). Quenching is caused by a photo-induced electron transfer between the excited PPV (donor, D) and the PTAA (acceptor, A). The electron-transfer process can be mediated by insertion of electronically inert spacing bilayers between the D and A layers, As the number of bilayers is increased, the fluorescence is gradually recovered which is explained theoretically by assuming that the electron-transfer rate can be described as k = Z exp(- beta r) where r is the distance between D and A. (C) 2000 Elsevier B.V. B.V. All rights reserved.

Structure, microstructure, ferroelectric/electromechanical properties and retention characteristics of [Bi1-x Nb (x) ]FeO3 thin films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrical and optical characteristics of SnO2 thin films prepared by dip coating from aqueous colloidal suspensions

Starting from aqueous colloidal suspensions, undoped and Nb5+ doped SnO2 thin films have been prepared by using the dip-coating sol gel process. X-ray diffraction results show that films are polycrystalline with crystallites of average size1-4nm. Decreasing the thickness of the films and increasing the Nb5+ concentration limits the crystallite size growth during firing. Complex impedance measurements reveal capacitive and resistive effects between adjacent crystallites or grains, characteristic of electrical potential barriers. The transfer of charge throughout these barriers determines the macroscopic electrical resistance of the layer. The analysis of the optical absorption spectra shows that the samples present more than 80% of their transmittance in the visible region and the value of the band gap energy increases with decreasing crystallite size. © 1997 Chapman & Hall.

PEDOT:PSS self-assembled films to methanol crossover reduction in Nafion (R) membranes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ferroelectric and dielectric characteristics of Bi3.25La0.75Ti3O12 thin films prepared by the polymeric precursor method

The ferroelectric properties and leakage current mechanisms of preferred oriented Bi3.25La0.75 Ti3O12 (BLT) thin films deposited on La0.5Sr0.5CoO3 (LSCO) by the polymeric precursor method were investigated. Atomic force microscopy indicates that the deposited films exhibit a dense microstructure with a rather smooth surface morphology. The improved ferroelectric and leakage current characteristics can be ascribed to the plate-like grains of the BLT films. © 2006 Trans Tech Publications, Switzerland.

Geographical Distribution and Demographic Characteristics of Gestational Trophoblastic Disease

OBJECTIVE: To outline the geographical distribution pattern of gestational trophoblastic disease (GTD) in a referral center in Bahia, Brazil, and determine the demographics of the disease.STUDY DESIGN: We conducted a study of data retrieved from medical records of 140 GTD patients referred to our Trophoblastic Diseases Center in 2002-2007, assessing geographical distribution across health care districts, demographics, referral sources, and previous pregnancy status.RESULTS: The most common GTD types were hydatidiform mole (106, 75.7%), invasive mole (32, 22.9%), choriocarcinoma (1, 0.7%), and placental site trophoblastic tumor (1, 0.7%). GTD incidence was 8.5 in 1,000 deliveries. Most patients originated from the coastal region (East district), which includes the state capital (77.9%). The 20-34 age group predominated (65%). Education level (67.9% attended elementary school only) and employment rate (42.9%) were low. Secondary hospitals were the principal source of referral (84.3%), followed by self-referrals (15.7%). Regarding previous pregnancy status, 42.1% (n = 59) had had term pregnancy, 39.3% (n = 55) no pregnancy, 15% (n = 21) miscarriage, and 0.7% (n = 1) ectopic pregnancy; 4 patients (2.9%) had previous hydatidiform mole.CONCLUSION: GTD predominated in the peak fertility age group and among patients of unfavorable sociodemographic status. (J Reprod Med 2010;55:305-310)

Study of electrical, chemical and structural characteristics of superconductor thin film obtained by polymeric precursors method

Superconductor films of the BSCCO system have been grown by dip coating technique with good success. The chemical method allows us to grow high temperature superconductor thin films to get better control of stoichiometry, large areas and is cheaper than other methods. There is a great technological interest in growth oriented superconductor films due anisotropic characteristics of superconductor materials of high critical temperature, specifically the cuprates, as we know that the orientation may increase the electrical transport properties. Based on this, the polymeric precursor method has been used to obtain thin films of the BSCCO system. In this work we have applied that method together with the deposition technique known as dip coating to obtain Bi-based superconductor thin films, specifically, Bi1.6Pb0.4Sr2.0C2.0Cu3.0Ox+8, also known as 2223 phase with a critical temperature around 110 K. The films with multilayers have been grown on crystalline substrates of LaAlO3 and orientated (100) after being heat treated around 790 degrees C - 820 degrees C in lapse time of 1 hour in a controlled atmosphere. XRD measurements have shown the presence of a crystalline phase 2212 with a critical temperature around 85 K with (001) orientation, as well as a small fraction of 2223 phase. SEM has shown a low uniformity and some cracks that maybe related to the applied heat treatment. WDS has also been used to study the films composition. Different heat treatments have been used with the aim to increase the percentage of 2223 phase. Measurements of resistivity confirmed the presence of at least two crystalline phases, 2212 and 2223, with T-c around 85 K and 110 K, respectively.

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphological and electrical evolution of ZnO:Al thin films deposited by rf magnetron sputtering onto glass substrates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and ultrastructural characteristics of interrenal gland and chromaffin cell of matrinxa, Brycon cephalus Gunther 1869 (Teleostei-Characidae)

This work presents the structure and ultrastructure of the interrenal gland and chromaffin cells, as well as the morphology of the head kidney of Brycon cephalus, the head kidney is composed of fused bilateral lobes located anterior to the swim bladder and ventrolateral to the spinal column, the parenchyma revealed lympho-haematopoietic tissue, melano-macrophage centres, interrenal gland and chromaffin cells. The interrenal gland consisted of cords or strands of cells grouped around the posterior cardinal vein and their branches. Chromaffin cells are found in small groups, closely associated with the interrenal gland and/or under the endothelium of the posterior cardinal vein. So far, the ultrastructural analysis has revealed only one interrenal cell type which contained abundant smooth endoplasmic reticulum and numerous mitochondria with tubulo-vesicular cristae, characteristic of steroid-producing cells. Two types of chromaffin cells were observed. The first type was characterized by the presence of vesicles with round, strongly electron-dense granules, which were eccentrically located, Such cells were interpreted as noradrenaline cells, Meanwhile, cells which contained smaller vesicles and electron-lucent granules, with a small halo separating the granule from the vesicular limiting membrane, were identified as adrenaline cells.

Behavioural and seminal characteristics of Santa Ines rams subjected to successive semen collections in the Amazonian region

The objective of this study was to evaluate the reproductive performance of Santa Ines rams subjected to successive semen collections in an Amazonian climate. Four rams were subjected to successive ejaculations during a maximum period of three hours. This procedure was repeated three times at 15-day intervals. Sexual and behavioural (libido) and andrological (testicular and seminal) assessments were performed. A total of 81 ejaculates were collected. Libido and semen vigour, volume, appearance and concentration decreased as the ejaculation frequency increased (P<0.05) and sperm motility showed a decreasing trend (P=0.06). The seminal pH increased over the sequence of collections (P<0.05). The only significant differences observed between individual rams were the variable scrotal circumference and the percentages of live sperm and sperm abnormalities (P<0.05). All the parameters of the first ejaculation were within the normal range for this species, which suggests that the local climatic conditions (high temperature and humidity) did not affect the behavioural, testicular or seminal parameters of experimental rams. Our findings indicate that the reproductive performance of Santa Ines rams could be affected by the intensification of ejaculation frequency; however, individual male variation needs to be taken into consideration.

Performance and carcass characteristics of broiler chickens with different growth potential and submitted to heat stress

In order to evaluate the effects of broiler genotype and of heat exposure on performance, carcass characteristics, and protein and fat accretion, six hundred one-day-old male broilers were randomly assigned in a 2 x 3 factorial arrangement, according to the following factors: genetic group (selected and non-selected broilers) and pair-feeding scheme (Ad(32) - reared under heat stress and fed ad libitum; Ad(23) - reared at thermoneutrality and fed ad libitum; Pf(23) - reared at thermoneutrality and pair fed with Ad(32)), with a total of six treatments with four replicates of 25 birds each. Independent of pair-feeding scheme, selected broilers showed better feed conversion, higher carcass yield, and lower abdominal fat deposition rate. However, as compared to non-selected broilers, they reduced more intensively feed intake when heat exposed, which promoted significant breast-yield decrease, and more pronounced changes on carcass chemical composition. These findings allows concluding that, in both genetic groups, both environmental temperature and feed-intake restriction influence abdominal fat deposition rate and other carcass characteristics; however, the impact of heat exposure on broiler performance is more noticeable on the selected line.

Relationships between physical, morphological, and physiological characteristics of seeds developed at different positions of the ear of two maize (Zea mays L.) hybrids

Maize seeds developed at different portions of the ear of two hybrids (one, a large seeded, and the other a small seeded hybrid) were compared as to physical positions, morphological, and physiological characteristics viewing to gain information to be used during seed conditioning. The number of positions in the ear were 10, starting at the proximal and ending at the distal end. For the sake of simplification, the data were combined to refer to seeds of the proximal, the central and the distal sectors of an ear. Measurements made of the seeds as to shape (length, width, and thickness) and as to size (1,000 seeds weight) indicated that the round seeds growing at the distal sector are significantly smaller (mainly when thickness is considered) and lighter than those growing at the proximal sector. on the other hand, determinations of the physiological quality indicated that the round-proximal and the central seeds are equivalent and both significantly superior to the round-distal ones, Considering these significant differences as to size, shape, and physiological quality, a proposition of suppressing part of the round-distal from the totallity of the round seeds during the operations of seed conditioning is made.