Silver(I) complexes with symmetrical Schiff bases: Synthesis, structural characterization, DFT studies and antimycobacterial assays

Synthesis, structural and spectroscopic characterizations, molecular modeling and antimycobacterial assays of new silver(I) complexes with two Schiff bases - MBDA and MBDB - are reported. The complexes [Ag(MBDA) 2]NO3, or AgMBDA, and [Ag(MBDB)NO3] or AgMBDB, were obtained by the reaction of the respective ligands with silver(I) nitrate in methanol. The Schiff bases were previously obtained by mixing ethylenediamine or 1,3-diaminopropane with p-anisaldehyde. The characterizations of the complexes were based on elemental (C, H and N) and thermal (TG-DTA) analyses and 13C and 1H NMR and FT-IR spectroscopic measurements, as well as X-ray structure determination for AgMBDA. Spectroscopic data predicted by DFT calculations are in agreement with the experimental data for the AgMBDA complex. The AgMBDA complex has a monomeric structure with a molar proportion 1:2 Ag/ligand, while AgMBDB presents a 1:1 proportion. The complexes AgMBDA and AgMBDB showed to be more effective against Mycobacterium tuberculosis than antibacterial agent silver sulfadiazine - SSD. © 2013 Elsevier Ltd. All rights reserved.

Thermal decomposition of vanadyl Schiff-base compounds

The thermal stability and thermal decomposition of several Schiff bases coordinated to vanadyl, VO (Schiff base), were studied by thermogravimetry and conventional gas Chromatographic and X-ray analyses. The kinetics, the number of steps and, in particular, the final temperature of decomposition of these complexes depend on the equatorial ligand. © 1992.

Tetradentate schiff base copper(II) complexes

Ten copper(II) complexes of tetradentate Schiff bases obtained by condensing two moles of an o-hydroxyphenylcarbonyl compound with a diamine have been prepared and characterized by elemental analyses, melting points, IR and electronic spectra. The IR and electronic spectra of the free ligand and the complexes are compared and discussed. The deconvolution of the visible spectra of the complexes in CHCl3, approximately C2v or C1, yielded four peaks at ca. 15000, 17000, 18000-19000, and 20000-22000 cm-1, assigned to the four d-d transitions.

Estudo e caracterização da eletropolimerização de moléculas nanoestruturadas a Base de Schiff

Pós-graduação em Química - IBILCE

Fast and efficient synthesis of pyrano[3,2-c]quinolines catalyzed by niobium(V) chloride

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical modified electrodes based on metal-salen complexes

A general view of the electroanalytical applications of metal-salen complexes is discussed in this review. The family of Schiff bases derived from ethylenediamine and ortho-phenolic aldehydes (N,N'-ethylenebis(salicylideneiminato) - salen) and their complexes of various transition metals, such as Al, Ce, Co, Cu, Cr, Fe, Ga, Hg, Mn, Mo, Ni, and V have been used in many fields of chemical research for a wide range of applications such as catalysts for the oxygenation of organic molecules, epoxidation of alkenes, oxidation of hydrocarbons and many other catalyzed reactions; as electrocatalyst for novel sensors development; and mimicking the catalytic functions of enzymes. A brief history of the synthesis and reactivity of metal-salen complexes will be presented. The potentialities and possibilities of metal-Salen complexes modified electrodes in the development of electrochemical sensors as well as other types of sensors, their construction and methods of fabrication, and the potential application of these modified electrodes will be illustrated and discussed.

Atividade anti - Mycobacterium tuberculosis intra e extracelular e citoxicidade dos complexos de rutênio e vanádio e seus ligantes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de filmes poliméricos de complexos a base de tiofeno8Schiff na construção de sensores eletroquímicos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese e caracterização de híbridos orgânico-inorgânicos luminescentes para aplicação em ensaios biológicos

Pós-graduação em Química - IBILCE

Estudos sobre o uso de NbCl5 como ácido de Lewis em reações de Povarov

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de nanocompósitos luminescentes baseados em complexos de Eu(III) e Ir(III) ancorados à nanopartículas de sílica por bases de Schiff

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Acupuntura: bases científicas e aplicações

A acupuntura visa à terapia e à cura das enfermidades pela aplicação de estímulos através da pele, com a inserção de agulhas em pontos específicos. Essa técnica esteve isolada do mundo ocidental durante milênios, distanciando sua forma de raciocínio e linguagem da cultura ocidental. Isto restringe sua aceitação no Ocidente, sendo considerada mística e sem base científica. Além disso, a prática da acupuntura no Ocidente se depara com deficiências no ensino e difusão científica. Porém, a eficácia dessa terapia levou a Organização Mundial de Saúde a listar enfermidades que podem ser tratadas pela acupuntura e, recentemente, essa técnica foi reconhecida como especialidade médica veterinária no Brasil. A pesquisa da acupuntura reveste-se, portanto, de grande interesse, na medida em que poderá traduzir conhecimentos milenares, contribuindo para sua aceitação e incorporação.

Effect of wounds applied to the bases of herbaceous cuttings on the rooting of four Japanese apricot clones (Prunus mume Sieb. et Zucc.) in an intermittent mist system

The Japanese apricot (Prunus mume Sieb. et Zucc.) is a fruit tree of the Rosaceae family which produces very acid and bitter fruits, highly appreciated by Orientals. In Brazil, this species has been studied as a rootstock for peach and nectarine trees, its main advantage being the reduction in plant vigour, which can favour the production of compact trees and orchard cultural treatments. This study was conducted in the Vegetable Production Department of FCAV/UNESP, Jaboticabal Campus, São Paulo State, Brazil, and the objective was to examine the effect of wounding the herbaceous cutting bases on the rooting of four Japanese apricot clones. The clones were obtained from plants under cultivation in the Instituto Agronomico de Campinas, Brazil, and were identified as Clones 02, 05, 10 and 15. The stock plants, obtained through herbaceous cuttings, were maintained under lath house conditions (50% of natural light). Cuttings 12 cm long with 3 to 5 leaves were collected from these clones and prepared. The experiment was carried out in a completely randomised design with 4 repetitions of 20 cuttings per replication, in a factorial 4 x 2 design, the clone factor having 4 levels (Clones 02, 05, 10 and 15) and the wounding factor at 2 levels of incisions into the cutting base (with and without). All the cuttings were treated with 2000 mg.L-1 of IBA for five seconds. Differences between the clones were observed concerning the rooting percentage, dead cuttings, number and length of roots. The incision (wound) at the base of the herbaceous cuttings of the Japanese apricot increased the number of roots and improved the distribution of these in the damaged tissue but the results were not considered sufficiently beneficial to make the treatment worthwhile.

Bases para a padronização do teste de germinação em três espécies de Solanum L.

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de matéria seca e absorção de nutrientes pelo milho em razão da saturação por bases e da adubação potássica

O trabalho foi conduzido em condições de casa de vegetação, com o objetivo de avaliar a resposta do milho à adubação potássica e à saturação do solo por bases, na produção de matéria seca e na absorção de nutrientes. O delineamento experimental foi inteiramente casualizado, com quatro repetições, em esquema fatorial 3x2x4, constituindo-se de três solos (Areia Quartzosa, Latossolo Vermelho-Escuro e Latossolo Roxo), dois valores de saturação por bases (40% e 70 %) e quatro teores de K no solo (0,5, 1,5, 3,0 e 6,0 mmol c dm-3). Para a calagem, foi utilizada mistura de carbonato de cálcio + carbonato de magnésio (PRNT = 103,3 %) na proporção de 4:1. A adubação básica constou de 200 mg kg-1 de N, 200 mg kg-1 de P e 5 mg kg-1 de Zn por vaso de 30 L, sendo o N parcelado em 2,48 g (83,7 mg kg-1) na semeadura e o restante em duas coberturas aos 25 e 40 dias após a emergência das plântulas (DAE). As doses de K utilizadas foram de 0, 3,62, 7,24 e 14,48 g de KCl por vaso. A semeadura foi realizada em 4/3/97, utilizando-se o milho cv. Zêneca 8392, mantendo-se uma planta/vaso durante 60 DAE. O K proporciona ganhos de matéria seca até teores de 1,5 mmol c dm-3 no solo. O aumento dos teores de K no solo resultam em queda na concentração de Ca e Mg na matéria seca do milho. A elevação da saturação por bases e respectivo aumento dos teores de Ca e Mg no solo reduzem a absorção de K pelo milho.