Angiogenesis and skin carcinomas with skull base invasion: A case-control study

Background. Some skin carcinomas may be very aggressive. Intensity of angiogenesis, measured by intratumoral vessel density using expression of CD34, has been associated with tumor aggressiveness. In this study, the expression of CD34 in basal cell carcinomas (BCCs) and squamous cell carcinomas (SCCs) with skull base invasion was compared with that in tumors with good outcome.Methods. Expression of CD34 was graded as mild, moderate, and intense, in 24 BCCs and 11 SCCs with skull base invasion. The control group included 23 BCCs and 10 SCCs.Results. Intense expression of CD34 was noted in 25.00% of BCCs with skull base invasion, compared with 4.35% in the control group (p =.058). Regarding SCCs, intense expression of CD34 was found in 54.55% of aggressive tumors, compared with 10.00% in the control group (p = 133).Conclusions. A trend toward denser microvascular angiogenesis was observed in both BCCs and SCCs with skull base invasion compared with less aggressive controls. (C) 2004 Wiley Periodicals, Inc.

Condroma de sela turca associado a hipopituitarismo: relato de um caso

Os condromas intracranianos são raros, sendo mais comumente encontrados na base do crânio e na região esfenoetmoidal. Nesta localização podem ser confundidos com meningiomas, neurinomas e craniofaringiomas. Os autores apresentam a evolução clínica e as características pela imagem de um paciente portador de condroma da sela turca submetido a excisão tumoral.

Temporomandibular joint condylar changes following maxillomandibular advancement and articular disc repositioning

Purpose To evaluate condylar changes 1 year after bimaxillary surgical advancement with or without articular disc repositioning using longitudinal quantitative measurements in 3-dimensional (3D) temporomandibular joint (TMJ) models. Methods Twenty-seven patients treated with maxillomandibular advancement (MMA) underwent cone-beam computed tomography before surgery, immediately after surgery, and at 1-year follow-up. All patients underwent magnetic resonance imaging before surgery to assess disc displacements. Ten patients without disc displacement received MMA only. Seventeen patients with articular disc displacement received MMA with simultaneous TMJ disc repositioning (MMA-Drep). Pre- and postsurgical 3D models were superimposed using a voxel-based registration on the cranial base. Results The location, direction, and magnitude of condylar changes were displayed and quantified by graphic semitransparent overlays and 3D color-coded surface distance maps. Rotational condylar displacements were similar in the 2 groups. Immediately after surgery, condylar translational displacements of at least 1.5 mm occurred in a posterior, superior, or mediolateral direction in patients treated with MMA, whereas patients treated with MMA-Drep presented more marked anterior, inferior, and mediolateral condylar displacements. One year after surgery, more than half the patients in the 2 groups presented condylar resorptive changes of at least 1.5 mm. Patients treated with MMA-Drep presented condylar bone apposition of at least 1.5 mm at the superior surface in 26.4%, the anterior surface in 23.4%, the posterior surface in 29.4%, the medial surface in 5.9%, or the lateral surface in 38.2%, whereas bone apposition was not observed in patients treated with MMA. Conclusions One year after surgery, condylar resorptive changes greater than 1.5 mm were observed in the 2 groups. Articular disc repositioning facilitated bone apposition in localized condylar regions in patients treated with MMA-Drep. © 2013 American Association of Oral and Maxillofacial Surgeons.

Perineural Invasion in Aggressive Skin Carcinomas of the Head and Neck

Introduction: Perineural invasion is a well-recognized form of cancer dissemination. However, it has been reported only in few papers concerning cutaneous carcinomas ( basal cell, BCC, and squamous cell, SCC). Moreover, the incidence is considered to be very low. Niazi and Lambert [Br J Plast Surg 1993; 46: 156-157] reported only 0.18% of perineural invasion among 3,355 BCCs. It is associated with high-risk subtypes, as morphea-like, as well as with an increased risk of local recurrence. No paper was found in the literature looking for perineural invasion in very aggressive skin cancers with skull base extension, with immunohistochemical analysis. Methods: This is a retrospective review, including 35 very advanced skin carcinomas with skull base invasion (24 BCCs and 11 SCCs, operated on at a single institution from 1982 to 2000). Representative slides were immunohistochemically evaluated with antiprotein S-100, in order to enhance nerve fibers and to detect perineural invasion. The results were compared to 34 controls with tumors with a good outcome, treated in the same time frame at the same Institution. Results: Twelve (50.0%) of the BCCs with skull base invasion had proven perineural invasion, as opposed to only 1 (4.6%) of the controls, and this difference was statistically significant (p < 0.001). Regarding SCCs, 7 aggressive tumors (63.6%) showed perineural invasion compared to only 1 (10.0%) of the controls, but this difference did not reach significance (p=0.08), due to the small number of cases. Conclusions: In this series, it was demonstrated that immunohistochemically detected perineural invasion was very prevalent in advanced skin carcinomas. In addition, it was statistically associated with extremely aggressive BCCs with skull base invasion. Copyright (c) 2008 S. Karger AG, Basel

Effects of cervical headgear and edgewise appliances on growing patients

Maxillary basal bone, dentoalveolar, and dental changes in Class II Division 1 patients treated to normal occlusion by using cervical headgear and edgewise appliances were retrospectively evaluated. A sample of 45 treated patients was compared with a group of 30 untreated patients. Subjects were drawn from the Department of Orthodontics, Araraquara School of Dentistry, Brazil, and ranged in age from 7.5 to 13.5 years. The groups were matched based on age, gender, and malocclusion. Roughly 87% of the treated group had a mesocephalic or brachicephalic pattern, and 13% had a dolicocephalic pattern. Cervical headgear was used until a Class I dental relationship was achieved. Our results demonstrated that the malocclusions were probably corrected by maintaining the maxillary first molars in position during maxillary growth. Maxillary basal bone changes (excluding dentoalveolar changes) did not differ significantly between the treated and the untreated groups. Molar extrusion after the use of cervical headgear was not supported by our data, and this must be considered in the treatment plan of patients who present similar facial types. (Am J Orthod Dentofacial Orthop 2001;119:531-9).

Prototipagem como forma alternativa para realização de cranioplastia com metilmetacrilato: Nota técnica

The prototyping is a method for reconstruction of human body segments by computer software. It has been used in neurosurgery for cranial reproduction in patients allowing the programming of surgical procedures and the production of prosthesis to reconstruct bone failures in the skull. We present two cases of cranioplasty performed with the use of acrylic prosthesis constructed by prototyping. After 10 months of follow-up, they donot present signs of infection and show good aesthetic result. The advantages pointed at the literature for this method (reduction of surgical time, easy technical handle, and good aesthetic result) were confirmed.

Estudo comparativo em radiografias cefalométricas laterais das alterações craniofaciais em indivíduos portadores de síndrome de Down e em portadores da síndrome da apnéia obstrutiva do sono

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Articulação temporomandibular: anatomia, dinâmica e disfunções temporomandibulares

This study gathered some of the most relevant researches already undertaken regarding the Temporomandibular Joint, presenting descriptions of its anatomy and dynamics, and relating them to the main aspects of joint dysfunctions. Literature recognizes that the Temporomandibular Joint, responsible for lower jaw movements, comprehends the skull base and the jaw bone. Its anatomy and dynamics are of great importance in order to understand the functions of Stomatognathic System as well as to study Temporomandibular Joint Dysfunction. The elements that compose this synovial joint and the bilateral characteristic confer eminent importance to the ATM before the skeleton head, the ability to perform broad movements and high complexity in its operation. It is accepted that the overload of one anatomical structure from the TMJ or other components of the Stomatognathic System leads to Temporomandibular Joint Dysfunctions. These disorders have different etiologies, ranging from malocclusion to emotional stress, and various forms of treatment, which are related in this study

Estudo morfométrico do canal do hipoglosso

The hypoglossal nerve (HN) is responsible for the intrinsic and extrinsic muscles of the tongue. Knowledge of this is extremely important because this nerve is responsible for tongue movement. HN paralysis can be associated to the disease itself in various zones in which the NH travels, mainly the hypoglossal canal (HC). Variations in shape of the hypoglossal canal have been pointed to as the cause of HN paralysis in several studies. Four hundred dried intact human skulls without sex or race identification, belonging to the Discipline of Anatomy of ICTSJC – UNESP were studied. Each canal was classified into types: type I (without division in the HC), type II (HC with low bone spike), type III (HC more than two projections bone), type IV (presence of complete bony bridge without dividing HC into two distinct canals) and type V (presence of bone bridge by dividing into two HC canals). HC was found in 100% of skulls studied in both side. Regarding types, we found 538 (67.25%) hypoglossal canal of type I (34%, right side and 33.25%, left side), 108 (13.5%) of type II (7.38%, right side, and 6.13%, left side), 60 (7.5%) hypoglossal canal of type III (3.5%, right side and 4.0%, left side) 84 (10.5%) of type IV (4.75%, right side and 5.75%, left side) and 5 (0.63%) of the type V (0.13%, right side and 0.5%, left side). We found 5 (0,63%) different HC and classified ourselves in type VI, VII and VIII. The average angle was 51,3º on right side and 50,25º on left side. Detailed knowledge of the anatomy of the CH supports professionals in interventions of bloody skull base and also in giving the correct diagnosis of the probable causes of paralysis of the hypoglossal nerve

Avaliação anteroposterior da posição da mandíbula em crianças dolicofaciais com má oclusão Classe II, divisão 1 de Angle

In this study, it is proposed to evaluate the anteroposterior position of mandible in children with Angle Class II, division 1 malocclusions, to compare two different methods of evaluating the jaw position and verifying the correlation between these two methods. We selected 26 Brazilian children with vertical growth pattern and Angle Class II, division 1 malocclusions, aged between 7 years and 8 months to 9 years and 6 months. The evaluation of the anteroposterior position of the mandible was performed with the use of lateral cephalograms by cephalometric angular SNB and linear Pog-Nperp. Based on the results obtained, it was concluded that the SNB identified more children with mandibular retrusion than Pog-Nperp; the increased tip of the SN plane may have decreased values of SNB; Pog-Nperp minimizes the possibility of error in the anteroposterior position of the mandible, since it eliminates the variable tip of the anterior skull base (SN plane); none of the cephalometric measurements used are able to eliminate the influence of the nasion point in the anterior-posterior and vertical position; correlation between SNB and Pog-Nperp is very low.

Cardiopulmonary and acid-base effects of desflurane and sevoflurane in spontaneously breathing cats

The cardiopulmonary effects of desflurane and sevoflurane anesthesia were compared in cats breathing spontaneously. Heart (HR) and respiratory (RR) rates; systolic (SAP), diastolic (DAP) and mean arterial (MAP) pressures; partial pressure of end tidal carbon dioxide (PETCO(2)), arterial blood pH (pH), arterial partial pressure of oxygen (PaO(2)) and carbon dioxide (PaCO(2)); base deficit (BD), arterial oxygen saturation (SaO(2)) and bicarbonate ion concentration (HCO(3)) were measured. Anesthesia was induced with propofol (8 +/- 2.3 mg/kg IV) and maintained with desflurane (GD) or sevoflurane (GS), both at 1.3 MAC. Data were analyzed by analysis of variance (ANOVA), followed by the Tukey test (P < 0.05). Both anesthetics showed similar effects. HR and RR decreased when compared to the basal values, but remained constant during inhalant anesthesia and PETCO(2) increased with time. Both anesthetics caused acidemia and hypercapnia, but BD stayed within normal limits. Therefore, despite reducing HR and SAP (GD) when compared to the basal values, desflurane and sevoflurane provide good stability of the cardiovascular parameters during a short period of inhalant anesthesia (T20-T60). However, both volatile anesthetics cause acute respiratory acidosis in cats breathing spontaneously. (c) 2004 ESFM and AAFP. Published by Elsevier Ltd. All rights reserved.

Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

Reconstruction of Skull Defects: Currently Available Materials

The restoration and recovery of a compromised skull continues to be a challenge to craniofacial surgeons and neurosurgeons. Different operative techniques and implant materials are being used to reconstruct the rigid framework of the skull. However, no currently available materials satisfy all of these criteria. According to this premise, the aim of this study was to report on the currently available materials for the reconstruction of the cranial vault and to describe their main characteristics, advantages, and disadvantages. Although the use of the materials discussed in this study is clearly positive for the reconstruction of skull defects and cranioplasties, there is a need for more complex studies and research into developing these materials to achieve all the ideal prerequisites stipulated by the scientific community and to evaluate their properties and aesthetic and functional results in the long term.

Temperature analysis during bonding of brackets using LED or halogen light base units

The purpose of our investigation is to compare the intrapulpal temperature changes following blue LED system and halogen lamp irradiation at the enamel surface of permanent teeth. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Several light sources can be used: halogens, arc plasma, lasers, and recently blue LED systems. An important aspect to be observed during such a procedures is the temperature change. In this study, we have used nine human extracted permanent teeth: three central incisors, three lateral incisors, and three canines. Teeth were exposed to two light sources: blue LED system (preliminary commercial model LEC 470-II) and halogen lamp (conventional photo-cure equipment). The surface of teeth was exposed for 20, 40, and 60 sec at the buccal and lingual enamel surface with an angle of 45 degrees. Temperature values measured by a thermistor placed at pulpar chamber were read in time intervals of 1 sec. We obtained plots showing the temperature evolution as a function of time for each experiment. There is a correlation between heating quantity and exposition time of light source: with increasing exposition time, heating increases into the pulpal chamber. The halogen lamp showed higher heating than the LED system, which showed a shorter time of cooling than halogen lamp. The blue LED system seems like the indicated light source for photo-cure of composite resin during the bonding of brackets. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Blue LED equipment did not heat during its use. This could permit a shorter clinical time of operation and better performance. © Mary Ann Liebert, Inc.

Bond strength of acrylic teeth to denture base resin after various surface conditioning methods before and after thermocycling

This study aimed to evaluate the durability of adhesion between acrylic teeth and denture base acrylic resin. The base surfaces of 24 acrylic teeth were flatted and submitted to 4 surface treatment methods: SM1 (control): No SM; SM2: application of a methyl methacrylate-based bonding agent (Vitacol); SM3: air abrasion with 30-μm silicone oxide plus silane; SM4: SM3 plus SM2. A heat-polymerized acrylic resin was applied to the teeth. Thereafter, bar specimens were produced for the microtensile test at dry and thermocyled conditions (60 days water storage followed by 12,000 cycles). The results showed that bond strength was significantly affected by the SM (P < .0001) (SM4 = SM2 > SM3 > SM1) and storage regimens (P < .0001) (dry > thermocycled). The methyl methacrylate-based adhesive showed the highest bond strength.