51 resultados para Resistance tests

em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"


Relevância:

100.00% 100.00%

Publicador:

Resumo:

We have investigated if a new LEDs system has enough efficient energy to promote efficient shear and tensile bonding strength resistance under standardized tests. LEDs 470 +/- 10 nm can be used to photocure composite during bracket fixation. Advantages considering resistance to tensile and shear bonding strength when these systems were used are necessary to justify their clinical use. Forty eight human extracted premolars teeth and two light sources were selected, one halogen lamp and a LEDs system. Brackets for premolar were bonded through composite resin. Samples were submitted to standardized tests. A comparison between used sources under shear bonding strength test, obtained similar results; however, tensile bonding test showed distinct results: a statistical difference at a level of 1% between exposure times (40 and 60 seconds) and even to an interaction between light source and exposure time. The best result was obtained with halogen lamp use by 60 seconds, even during re-bonding; however LEDs system can be used for bonding and re-bonding brackets if power density could be increased.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

Laboratory tests were carried out on larvae and adults of the cattle tick Boophilus microplus to determine the toxicity of macrocyclic lactone acaricides (MLs). Technical and commercial MLs were used in larval packet test (LPT), larval immersion test (LIT) and adult immersion test (AIT). Tn LIT and AIT the toxicity of MLs was much higher than for LPT. In the AIT, diluting the injectable formulation of MLs in water was as effective as dilution in ethanol + Triton X-100. LC50, LC99.9 and 95% confidence limits were determined so that a discriminating dose (DD) could be set for larval and adult tests in order to diagnose potential resistance to MLs in field samples of the tick. These DDs are for Australian strains of B. microplus and may not be suitable for other strains until further work is carried out.The value of these diagnostic tests can only be verified if or when resistance to MLs emerges in ticks. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The purpose of this work is the deposition of films in order to increase the corrosion resistance of AISI 304 steel, which is a material used to construct the reactors for bioethanol production. This deposition inhibits the permeation of corrosive species to the film-metal interface. Thin films were prepared by radio-frequency plasma enhanced chemical vapor deposition (RF-PECVD) method using plasmas of hexamethyldisiloxane/argon/oxygen mixtures excited by signals of different powers. The plasma was generated by the application of RF power of 13.56 MHz to the sample holder while keeping grounded the topmost electrode and the chamber walls. The effect of the RF power on the properties of the samples was investigated by perfilometry, X-ray photoelectron spectroscopy (XPS), contact angle, and electrochemical impedance spectroscopy (EIS). The results of the corrosion resistance tests of the AISI 304 steel were interpreted in terms of the energy delivered to the growing layer by plasma excitation power.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Objetivando-se estudar a influência da adubação na manifestação da resistência de feijoeiro (Phaseolus vulgaris L.) (cultivares Rosinha G-2, ESAL-564 - Carioca e Diamante Negro) ao ataque de Acanthoscelides obtectus (Say, 1831) (Coleoptera: Bruchidae) foram conduzidos, na época das águas, testes com e sem chance de escolha, utilizando-se grãos obtidos de parcelas adubadas com N, P, K, NP, NK, PK, NPK, e sem adubo, totalizando 24 tratamentos. Os testes foram realizados em condições controladas de temperatura, umidade e luz. Foram avaliados o número de insetos atraídos e de ovos, em cada tratamento. Concluiu-se, no teste com chance de escolha, que o número de ovos de A. obtectus por recipiente foi reduzido pela aplicação do nitrogênio. A aplicação de nitrogênio em adubação resultou em menor porcentagem de insetos atraídos e menor número de ovos no genótipo Rosinha G-2. A manifestação da resistência nos genótipos ESAL-564 e Rosinha G-2 ao ataque de A. obtectus ficou evidente quando utilizados nitrogênio e potássio. Nos testes sem chance de escolha o consumo dos insetos foi reduzido nos grãos produzidos com a aplicação do nitrogênio. A aplicação de nitrogênio em adubação resultou no aumento do número de ovos de A. obtectus no genótipo ESAL-564. Não ficou evidente a manifestação da resistência nos genótipos ESAL-564 e Rosinha G-2 ao ataque do caruncho, pela aplicação dos macronutrientes N, P e K. Na ausência de fósforo o ciclo biológico do inseto foi maior na presença de potássio.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Um estudo foi realizado com o objetivo de avaliar os efeitos do método de remoção da pele do filé (com alicate e com máquina) e da técnica de curtimento (com ou sem sais de cromo, bioleather) sobre a resistência da pele de tilápia-do-nilo (Oreochromis niloticus). Foram retiradas as peles de 40 tilápias (450 g), 20 com uso de alicates e 20 com auxílio de máquina. Após o curtimento e a retirada dos corpos-de-prova, as peles foram encaminhadas a um laboratório aclimatizado (23ºC e 50% de umidade relativa do ar) para realização dos testes de resistência em dinamômetro EMIC, com velocidade de afastamento entre cargas de 100 ± 20 mm/mm. O método de retirada da pele do filé não afetou os resultados dos testes de tração e rasgamento progressivo. A pele retirada com a máquina apresentou elongação superior (88,48%) à removida com alicate (71,09%). Peles curtidas com sais de cromo (25,54 N/mm; 12,18 N/mm²) foram mais resistentes que as curtidas sem sais de cromo (bioleather) (13,11 N/mm; 9,89 N/mm²). Peles curtidas por estas técnicas (com cromo e bioleather) podem ser utilizadas na confecção de vestuários, pois as médias dos testes de tração, alongamento e rasgamento progressivo foram superiores a 9,80 N/mm², 60% e 14,72 N/mm, respectivamente, valores mínimos recomendados para couros curtidos ao cromo.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The objective of this study was to investigate the effects of ultrasound treatment and physical exercise on the velocity of bone consolidation and resistance to deformation. We performed osteotomy in the upper third of the right tibia of rats. Physical training consisted of swimming 1 h per day with a load of 5% b.w. for 30 days. Therapy with medium-intensity ultrasound was applied daily on the damaged area. Wistar rats were divided into the following groups: osteotomized sedentary animals with no ultrasound treatment (1.OSnUS), osteotomized trained animals with no ultrasound treatment (2.OTnUS), osteotomized sedentary animals with ultrasound treatment (3.OSwUS). and osteotomized trained animals with ultrasound treatment (4.OTwUS). The animals were sacrificed for the following analyses: muscle glycogen, serum alkaline phosphatase at the 5th, 10th, 20th, and 30th days, test of maximum resistance to flexion, rupture flexion and mean tibial rigidity at the 30th day. Muscle glycogen was increased at the 20th day: alkaline phosphatase was elevated at the 5th and 20th days in groups 3.OSwUS and 4.OTwUS. and decreased at the 10th day. Groups1.OSnUS and 2.OTnUS did not show significant variations. In the mechanical resistance tests, we noted that ultrasound therapy and the association of physical activity used in the present study showed significant differences in bone resistance and bone rigidity after 30 days of treatment. These facts suggest that ultrasound or physical activity, or their combination may accelerate the process of bone tissue repair.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The behaviour of the non conserved and 98% glycerin conserved specimens for periods of 30, 60 and 90 days of bovine diaphragma's tendinous center, fibrous pericardium and parietal peritoneum submitted to mechanical tests of traction, was observed in ten bovines between 30 months and 36 months of age, crossbreeds, males and females, collecting fragments of these aforesaid membranes in each animal. The diaphragma's tendinous center and parietal peritoneum did not suffered significant modification (p>0.05) in the values of tension when compared to the resistance tests of traction of non conserved and 98% glycerin conserved membranes. However, all the evaluated tissues showed significant increase (p£0.05) of the elongation values when conserved in 98% glycerin for until 90 days. It was also observed that fibrous pericardium is the one which supports greaters tensions. So, it to was concluded, that glycerin is efficient to the conservation of biological membranes besides modifying its mechanical properties.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)