86 resultados para Protocolos de dosimetria
em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"
Resumo:
In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...
Resumo:
OBJETIVO: Avaliação de condições dos equipamentos e dosimetria em setores de tomografia computadorizada utilizando protocolos de cabeça, abdome e coluna lombar em pacientes adultos (em três equipamentos distintos) e pediátricos com até um ano e meio de vida (em um dos equipamentos avaliados). MATERIAIS E MÉTODOS: Foram estimados o índice de dose em tomografia computadorizada e a dose média em cortes múltiplos, em exames com pacientes adultos, em três distintos equipamentos. Ainda foram estimadas as doses na superfície de entrada e as doses absorvidas em exame de cabeça para pacientes adultos e pediátricos em um dos equipamentos avaliados. RESULTADOS: Foram realizados testes de controle de qualidade, mecânicos, demonstrando que os equipamentos satisfazem as especificações de uso estabelecidas pelas normas vigentes. Os resultados da dosimetria mostraram que valores de dose média em cortes múltiplos excederam em até 109,0% os valores de níveis de referência, apresentando consideráveis variações entre os equipamentos avaliados neste estudo. As doses absorvidas obtidas com protocolos pediátricos são inferiores aos de pacientes adultos, apresentando redução de até 51,0% na tireoide. CONCLUSÃO: Neste estudo foram avaliadas as condições de operação de três equipamentos tomográficos, estabelecendo quais parâmetros devem ser trabalhados para a implantação de um programa de controle de qualidade nas instituições onde esta pesquisa foi desenvolvida.
Resumo:
Almost forty years computed tomography (CT) has been one of the most powerful tools in diagnostic imaging. However, this modality delivers relatively high doses to their patients. It is known that the inappropriate use and unnecessary radiation may be associated with a significant risk of cancer, especially in pediatric patients. Moreover, the quality assurance in CT, provided and required by Portaria 453/98 and the guide of the RE 1016/05, ensures that the images generated by computer tomography provide reliable diagnostic information with doses as low as reasonably achievable. This research aimed to make the quality control (QC) of CT equipment; establish a better relationship between dose and noise on the image to protocols of skull CT according to the study of optimization proposed in 2005 by Daros; and assess the dose distribution in different cranial organs for protocols of adult and pediatric use in the routine of the Department of Diagnostic Imaging of HCFMB-UNESP. The equipment used for testing QC, optimization and dosimetry was a third generation tomograph GE Sytec 3000i
Resumo:
Radiotherapy is a multidisciplinary speciality which uses complex equipment and radiation sources for delivery of treatment, using high-energy ionizing radiation to treat cancer at several stages of complexity. Since radiation therapy is a technique which involves a precalculated radiation dose, it shall be established quality assurance programs that provide an efficient and safety treatment. The International Commission on Radiation Units and Measurements (ICRU) report No. 50 has recommended dose uniformity between 5% of the prescribed dose throughout the region of interest. This is one of the most primordial points that justify the importance of a suitable attendance of the equipments quality and performance. For quality control, the medical physicist will be involved with establishing and running a Quality Control Program (QCP). He must adapt or develop the procedures of equipment acceptance and commissioning, besides verifying the use of principles and accepted protocols of national and international reports to assure the correct quality, quantity, and placement of radiation during the performance of a radiological procedure, establishing adequate protocols to ensure accurate patient dosimetry. This present work consists of a description of the activities carried through the Sectors of Radiation Therapy of the Hospital of Clinics of the Campinas State University (Unicamp), particularly in the implementation of the Quality Control Program
Resumo:
A técnica radioterápica Total Skin Irradiation (TSI), utilizada para tratamento de Micose Fungóide e doenças similares, apresenta grande complexidade na sua dosimetria e implementação nos Serviços de Radioterapia. No SUS – Sistema Único de Saúde - do Brasil, só há esse tratamento no Serviço de Radioterapia do Hospital das Clínicas da UNICAMP (Campinas) e no Instituto Nacional do Câncer (INCA) (Rio de Janeiro). O objetivo deste trabalho é o estudo e o desenvolvimento de um protocolo de controle de qualidade e dosimetria a ser implementado na técnica utilizada no Serviço de Radioterapia do Hospital de Clínicas da Universidade Estadual de Campinas (HC - UNICAMP). Todos os estudos e análises para a elaboração do protocolo foram baseados no Report 23[1] da AAPM – American Association of Physicists in Medicine - e no TRS-398[3] da IAEA – International Atomic Energy Agency. A metodologia e os resultados obtidos apresentam-se descritos neste relatório
Resumo:
OBJETIVO: Avaliar a função renal de cães sadios, sob dois protocolos para administração de cisplatina. MÉTODOS: Todos os animais foram submetidos a três sessões de quimioterapia com cisplatina (60mg/m², iv) a intervalos de 21 dias. Foi realizada fluidoterapia com solução de cloreto de sódio a 0,9%, (25mL/kg/hora,iv), durante duas horas e, após administração de cisplatina, por mais uma hora. Os animais do grupo 2 receberam furosemida (2mg/kg, iv) 20 minutos antes da administração da cisplatina. A avaliação da função renal foi feita por exame clinico, urinálise, concentrações séricas de uréia e creatinina, clearance de creatinina, excreção fracionada de sódio e de potássio e razão proteína: creatinina urinária. As avaliações foram feitas imediatamente antes e 1, 2, 5, e 21 dias após cada uma das três sessões de quimioterapia. RESULTADOS: Mantiveram-se dentro da normalidade, não sendo detectados sinais de lesões ou insuficiência renal. Os animais que não receberam furosemida sofreram aumento gradativo nas concentrações séricas de creatinina e diminuição no clearance da mesma. CONCLUSÃO: O regime de fluidoterapia empregado mostra ser efetivo em minimizar a ação nefrotóxica da cisplatina e benefício adicional importante é obtido pela administração de furosemida.
Resumo:
INTRODUÇÃO: O artigo compara os protocolos Davison-Caprini (americano) e Sandri (brasileiro) para profilaxia da trombose venosa profunda (TVP), buscando a elaboração de um novo protocolo, mais abrangente e aplicável. MÉTODO: Foi realizado um estudo prospectivo, durante um ano, abrangendo 212 pacientes, comparando os protocolos quanto à estratificação de risco de TVP, e ao tipo de profilaxia indicado. Um novo protocolo foi proposto, aplicado e comparado aos anteriores. RESULTADOS: Obteve-se um novo protocolo, denominado Sandri modificado, que restringe a heparina a um grupo seleto de pacientes, semelhante ao americano, mantendo-se adequado tanto para cirurgias estéticas quanto reparadoras. CONCLUSÕES: A baixa adesão, por parte dos cirurgiões plásticos, ao uso rotineiro da profilaxia de TVP, espelha a escassez de informação sobre o tema. O protocolo Sandri modificado busca melhorar a compreensão e a aplicabilidade da profilaxia da TVP na cirurgia plástica.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Utilizaram-se 12 cães, machos, distribuídos em quatro grupos (G) experimentais, selecionados de acordo com o tempo de fluidoterapia com solução fisiológica 0,9%: G1 (sem fluidoterapia), G2 (uma hora de fluidoterapia antes da cisplatina), G3 (uma hora de fluidoterapia antes da cisplatina e uma hora após) e G4 (duas horas de fluidoterapia antes da cisplatina e uma após). Todos os animais receberam a cisplatina (70mg/m²), pela via intravenosa, sendo os ciclos de quimioterapia realizados em intervalos de três semanas, num total de três ciclos. O ondansetron (0,4mg/kg) foi administrado pela via intravenosa, a cada oito horas, no dia da quimioterapia e, a seguir, a cada 12 horas, por dois dias. O methimazole (40mg/kg) foi pela via oral, 30 minutos antes da cisplatina e quatro horas após. Avaliaram-se os parâmetros hematológicos, bioquímicos, urinários e dosagem de tiroxina e triiodotironina a cada sete dias até o término do experimento. Esse protocolo foi eficaz e seguro em cães que permaneceram sob fluidoterapia durante duas a três horas. Os animais que não receberam fluidoterapia e os que ficaram somente uma hora sob infusão intravenosa de solução fisiológica apresentaram alterações que resultaram em não-recomendação do protocolo.
Resumo:
Los efectos de la prostaglandina (PGF2α) vs CIDR y eCG (gonadotrofina coriónica equina) en la dinámica de la población folicular y su relación con las concentraciones plasmáticas de P4 fueron investigadas en ovejas cíclicas. Fueron utilizadas 14 hembras ovinas de la raza Bergamascia; el Grupo 1 (Gl) se sometió a dos aplicaciones de PGF2α, y, el Grupo 2 (G2) tratado con CIDR durante 14 días siendo que, en el momento de su retirada, se administraron 500 UI de eCG. La dinámica folicular ovárica fue monitoreada por medio de ecógrafo. Se monitorearon todos los folículos ≥ mm y se gráfico su posición diariamente, observándose el desarrollo individual folicular. Desde el día anterior a la aplicación de la segunda dosis de PGF2α, (Gl) y desde la administración de eCG (G2) hasta el décimo día del ciclo estral se colectaron muestras de sangre para el análisis de P4. Hubo diferencia significativa (P<0,001) en las concentraciones plasmáticas de P4 entre los tratamientos. La sincronización del estro y ovulación utilizando CIDR + 500 UI de eCG, incrementó la cantidad de folículos reclutados, además de aumentar el diámetro máximo y la tasa de crecimiento de los folículos grandes en la primera onda folicular. En consideración a los resultados se puede concluir que la sincronización del estro y de la ovulación en hembras ovinas, utilizando el CIDR y 500 UI de eCG, incrementa la cantidad de folículos reclutados, además de aumentar el diámetro máximo y la tasa de crecimiento de los folículos grandes. La asociación CIDR+500 UI de eCG provoca aumentos significativos en las concentraciones plasmáticas de progesterona (P4) al inicio de la fase luteal en hembras ovinas.
Resumo:
The purpose of this review was to assess the efficacy of recombinant LH (r-LH) supplementation for controlled ovarian stimulation in recombinant FSH (r-FSH) and GnRH-agonist (GnRH-a) protocol for IVF/ICSI cycles. Search strategies included on-line surveys of databases from 1990 to 2006. Four trials fulfilled the inclusion criteria (Lisi et al. 2002, Humaidan et al. 2004, Marrs et al. 2004, Tarlatzis et al. 2006). When the review was carried out advantages were observed for the r-LH supplementation protocol with respect to a fewer days of stimulation, a fewer total amount of r-FSH administered and a higher serum estradiol levels on the day of hCG administration. However, these differences were not observed in number of oocyte retrieved, number of mature oocytes, clinical pregnancy per oocyte retrieval, implantation and miscarriage rates. Nevertheless, more randomized controlled trials are necessary before evidence-based recommendations regarding exogenous r-LH supplementation in ovarian stimulation protocols with r-FSH and GnRH-a for assisted reproduction treatment can be provided.
Resumo:
The purpose of this investigation was to verify the efficacy of recombinant LH supplementation for controlled ovarian stimulation in GnRH-antagonist protocol for assisted reproductive technologies cycles. Search strategies included on-line surveys of databases from 1990 to 2006. In this review and meta-analysis, the observed advantages for the LH supplementation protocol were a higher serum estradiol levels on the day of hCG administration and a higher number of mature oocytes. However, there were no differences observed in the total amount of r-FSH administered, days of stimulation, number of oocyte retrieved, the clinical pregnancy rate per oocyte retrieval, the implantation rate and miscarriage rate. This result demonstrates that the association of r-LH with r-FSH may prevent any decrease in estradiol after antagonist administration and a significant higher number of mature oocytes was obtained. Nevertheless, additional randomized controlled trials are needed confirm these observations.
Resumo:
The objective of this study was to evaluate the LH surge after last hormonal injection of synchronization of ovulation protocols in buffalo. Fifteen multiparous buffaloes received 25 mg of Lecirelin in Day 0, and 150 mg of D-Cloprostenol on Day 7. On Day 8, estradiol benzoate was injected in Group 1 (0.5 mg, n = 5) and Group 2 (1.0 mg, n = 5). On Day 9, five buffaloes received 25 mg of Lecirelin (Control). Blood samples were collected for measure the LH concentrations on Day 7 and then every 3 hours until 72 hours after the PGF 2a injection. For evaluation of LH surge were compared the interval between PGF 2a injection to LH surge, duration, amplitude and area under the LH peak. The LH surge occurred 51.0 + 0.0 hours, 47.3 + 2.7 hours and 47.0 + 3.8 hours after PGF 2a injection for Control, Group 1 and Group 2, respectively (P > 0.05). The duration of LH peak in Control (7.8 + 1.5 hours) was shorter than Groups 1 and 2 (10.5 + 1.5 hours vs. 10.8 + 2.4 hours, respectively; P < 0.05). The amplitudes of LH peak were 4.5 + 0.4 ng/mL, 4.0 + 0.4 ng/mL and 4.3 + 0.8 ng/mL for Control, Group 1 and Group 2, respectively (P > 0.05). The area under LH peak for Control (4.8 ± 0.7) was smaller than the areas of the Groups 1 and 2 (8.8 ± 2.5 vs. 8.7 2.2, respectively; P < 0.05). In summary, the estradiol benzoate injection provided higher duration and area of LH peak than GnRH injection in Ovsynch protocol in buffalo.
Resumo:
This study was carried out with the objective of examining the effect of the short-term estrus synchronization protocol. Ewes were divided in four groups: Control Group (MAP sponges for 12 days, and eCG at withdrawal); Groups I, II and III used the sponge for four days, and 100 μg of PGF was applied at withdrawal; and additionally, Group I (0.1 mg of Estradiol benzoate - EB, in the sponge placement, and in the withdrawn 400 UI of eCG and 50 μg of GnRH 48h later); Group II (35 mg of injectable progesterone and 0.1 mg of EB in the sponge placement, and 400 UI of eCG at withdrawal, and 50 μg of GnRH 48h after); Group III (35 mg of injectable progesterone and 0.2 mg of EB in the sponge placement, and 400 UI of eCG at withdrawal, and 50 ?g of GnRH 56h after). Exams were accomplished for ultrasound and determine the plasmatic concentrations of progesterone and observations of the beginning the estrus and the ovulation. The lack of eCG in Group I caused this protocol to be less efficacious in induction and synchronization of estrus and ovulation. The Control Group had a greater synchronization of estrus and ovulation.
Resumo:
Objective: To evaluate the influence of different air abrasion protocols on the surface roughness of an yttria-stabilized polycrystalline tetragonal zirconia) (Y-TZP) ceramic, as well as the surface topography of the ceramic after the treatment. Method: Fifty-four specimens (7.5×4×7.5mm) obtained from two ceramic blocks (LAVA, 3M ESPE) were flattened with fine-grit sandpaper and subjected to sintering in the ceramic system's specific firing oven. Next, the specimens were embedded in acrylic resin and the surfaces to be treated were polished in a polishing machine using sandpapers of decreasing abrasion (600- to 1,200-grit) followed by felt discs with 10μm and 3μm polishing pastes and colloidal silica. The specimens were then randomly assigned to 9 groups, according to factors particle and pressure(n=6): Gr1- control; Gr2- Al 2O 3(50μm)/2.5 bar; Gr3- Al 2O 3(110μm)/2.5 bar; Gr4- SiO 2(30μm)/2.5 bar; Gr5- SiO 2(30μm)/2.5 bar; Gr6- Al 2O 3(50μm)/3.5 bar; Gr7- Al2O3(110μm)/3.5 bar; Gr8- SiO 2(30μm)/3.5 bar; Gr9- SiO 2(30μm)/3.5 bar. After treatments, surface roughness was analyzed by a digital optical profilometer and the morphology was examined by scanning electron microscopy (SEM). Data (μm) were subjected to statistical analysis by Dunnett's test (5%), two-way ANOVA and Tukey's test (5%). Results: The type of particle (p=0.0001) and the pressure (p=0.0001) used in the air abrasion protocols influenced the surface roughness values among the experimental groups (ANOVA). The mean surface roughness values (μm) obtained for the experimental groups (Gr2 to Gr9) were, respectively: 0.37 D; 0.56 BC; 0.46 BC; 0.48 CD; 0.59 BC; 0.82 A; 0.53B CD; 0.67 AB. The SEM analysis revealed that Al 2O 3, regardless of the particle size and pressure used, caused damage to the surface of the specimens, as it produced superficial damages on the ceramic, in the form of grooves and cracks. Conclusion: Al2O3 (110 μm/3.5 bar) air abrasion promoted the highest surface roughness on the ceramics, but it does not mean that this protocol promotes better ceramic-cement union compared to the other air abrasion protocols.