Model peptides mimic the structure and function of the N-terminus of the pore-forming toxin sticholysin II

To investigate the role of the N-terminal region in the lytic mechanism of the pore-forming toxin sticholysin II (St II), we studied the conformational and functional properties of peptides encompassing the first 30 residues of the protein. Peptides containing residues 1-30 (P1-30) and 11-30 (P11-30) were synthesized and their conformational properties were examined in aqueous solution as a function of peptide concentration, pH, ionic strength, and addition of the secondary structure-inducing solvent trifluoroethanol (TFE). CD spectra showed that increasing concentration, pH, and ionic strength led to aggregation of P1-30; as a consequence, the peptide acquired beta-sheet conformation. In contrast, P11-30 exhibited practically no conformational changes under the same conditions, remaining essentially structureless. Moreover, this peptide did not undergo aggregation. These differences clearly point to the modulating effect of the first 10 hydrophobic residues on the peptides aggregation and conformational properties. In TFE both the first ten hydrophobic peptides acquired alpha-helical conformation, albeit to a different extent, P11-30 displayed lower alpha-helical content. P1-30 presented a larger-fraction of residues in alpha-helical conformation in TFE than that found in St II's crystal structure for that portion of the protein. Since TFE mimics the membrane em,, such increase in helical content could also occur upon toxin binding to membranes and represent a step in the mechanism of pore formation. The peptides conformational properties correlated well with their functional behaviour. Thus, P1-30 exhibited much higher hemolytic activity than P11-30. In addition, P11-30 was able to block the toxin's hemolytic activity. The size of pores formed in red blood cells by P 1-30 was estimated by measuring the permeability PEGs of different molecular mass. The pore radius (0.95 +/- 0.01 nm) was very similar to that of the PEGs of different pore formed by the toxin. The results demonstrate that the synthetic peptide P1-30 is a good model of St 11 conformation and function and emphasize the contribution of the toxin's N-terminal region, and, in particular, the hydrophobic residues 1-10 to pore formation. (c) 2005 Wiley Periodicals, Inc.

Functional and Topological Studies with Trp-Containing Analogs of the Peptide StII(1-30) Derived From the N-Terminus of the Pore Forming Toxin Sticholysin II: Contribution to Understand its Orientation in Membrane

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Structural and biological characterization of three novel mastoparan peptides from the venom of the neotropical social wasp Protopolybia exigua (Saussure)

The venom of the Neotropical social wasp Protopolybia exigua(Saussure) was fractionated by RP-HPLC resulting in the elution of 20 fractions. The homogeneity of the preparations were checked out by using ESI-MS analysis and the fractions 15, 17 and 19 (eluted at the most hydrophobic conditions) were enough pure to be sequenced by Edman degradation chemistry, resulting in the following sequences:Protopolybia MPI I-N-W-L-K-L-G-K-K-V-S-A-I-L-NH2 Protopolybia-MP II I-N-W-K-A-I-I-E-A-A-K-Q-A-L-NH2 Protopolybia-MP III I-N-W-L-K-L-G-K-A-V-I-D-A-L-NH2All the peptides were manually synthesized on-solid phase and functionally characterized. Protopolybia-MP I is a hemolytic mastoparan, probably acting on mast cells by assembling in plasma membrane, resulting in pore formation; meanwhile, the peptides Protopolybia-MP II and -MP III were characterized as a non-hemolytic mast cell degranulator toxins, which apparently act by virtue of their binding to G-protein receptor, activating the mast cell degranulation. (C) 2004 Elsevier Ltd. All rights reserved.

A stability transition at mildly acidic pH in the alpha-hemolysin (alpha-toxin) from Staphylococcus aureus

The effects of mildly acidic conditions on the free energy of unfolding (Delta G(u)(buff)) of the pore-forming alpha-hemolysin (alpha HL) from Staphylococcus aureus were assessed between pH 5.0 and 7.5 by measuring intrinsic tryptophan fluorescence, circular dichroism and elution time in size exclusion chromatography during urea denaturation, Decreasing the pH from 7.0 to 5.0 reduced the calculated Delta G(u)(buff) from 8.9 to 4.2 kcal moI(-1), which correlates with an increased rate of pore formation previously observed over the same pH range, It is proposed that the lowered surface pH of biological membranes reduces the stability of alpha HL thereby modulating the rate of pore formation. (C) 1999 Federation of European Biochemical Societies.

IDENTIFICATION OF A PUTATIVE MEMBRANE-INSERTED SEGMENT IN THE ALPHA-TOXIN OF STAPHYLOCOCCUS-AUREUS

To gain a fuller understanding of the regions of the Staphylococcus aureus alpha-toxin important in pore formation, we have used Forster dipole-dipole energy transfer to demonstrate that a central glycine-rich region of alpha-toxin (the so-called ''hinge'' region) inserts deeply into the bilayer on association of toxin with liposomes. Mutant alpha-toxins with unique cysteine (C) residues at positions 69 and 130 [Palmer, M., et al. (1993) J. Biol. Chem. 268, 11959) were reacted with the C-specific fluorophore acrylodan, which acted as an energy donor. The chosen acceptor was N-(7-nitrobenz-2-oxa-13-diazol-4-yl)-1,2-bis(hexadecanoyl) -sn-glycero-3-phosphoethanolamine (NBD-PE). Measurement of the degree of donor quenching with increasing NBD-PE in the inner bilayer leaflet enables the distance of closest approach between donor and acceptor to be estimated. For toxin labeled with acrylodan at position 130 (in the hinge region), this distance is approximately 5 +/- 2 Angstrom, showing that the probe is close to the inner surface of the liposomes. A second probe labeled at position 69 (in the N-terminal domain) shows negligible energy transfer, indicating a distance of closest approach >40 Angstrom. This implies that this N-terminal region remains ''outside'' the liposome. We propose a model in which the central region of the alpha-toxin inserts into the membrane and possibly participates in forming the wall of the pore.

It only takes one to do many jobs: Amphotericin B as antifungal and immunomodulatory drug

Amphotericin B acts through pore formation at the cell membrane after binding to ergosterol is an accepted dogma about the action mechanism of this antifungal, and this sentence is widely found in the literature. But after 60 years of investigation, the action mechanism of Amphotericin B is not fully elucidated. Amphotericin B is a polyene substance that is one of the most effective drugs for the treatment of fungal and parasite infections. As stated above, the first mechanism of action described was pore formation after binding to the ergosterol present in the membrane. But it has also been demonstrated that AmB induces oxidative damage in the cells. Moreover, amphotericin B modulates the immune system, and this activity has been related to the protective effect of the molecule, but also to its toxicity in the host. This review tries to provide a general overview of the main aspects of this molecule, and highlight the multiple effects that this molecule has on both the fungal and host cells. © 2012 Mesa-Arango, Scorzoni and Zaragoza.

Estudo por dinâmica molecular da estabilidade conformacional de dímeros do peptídeo Eumenine mastoparan-AF em água e mistura TFE-água

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudos das propriedades estruturais de análogos substituídos com 'TRP POT.2,7 ou 24' do fragmento com 30 resíduos da região amino-terminal da Esticolisina II

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulações por dinâmica molecular fine-e coarse-grained das interações intermoleculares entre peptídeos antimicrobianos da família Mastoparano e membranas modelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Differential Effect of Solution Conditions on the Conformation of the Actinoporins Sticholysin II and Equinatoxin II

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletroquimioterapia em cães e gatos

The eletrochemotherapy is a new treatment option for neoplasms that involves the application of chemotherapeutic drugs endovenously or intralesionally, associated with local severe and short duration electrical pulses. The electrical pulses promote destabilization of the cell membrane, causing transitory pore formation and facilitating the entry of chemotherapeutic agents inside the cells, increasing its cytotoxicity. This therapy allows for lower doses of chemotherapy drugs compared to conventional chemotherapy, resulting in the decrease of side effects and costs of treatment. The eletrochemotherapy has proved effective in the treatment of cancer regardless of its histological origin and location. This review aims to highlight possibilities to use this treatment in Veterinary Oncology

PE and PS lipids synergistically enhance membrane poration by a peptide with anticancer properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efficiency of ethanol conversion induced by controlled modification of pore structure and acidic properties of alumina catalysts

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Formation of TiO2 ceramic foams from the integration of the sol-gel method with surfactants assembly and emulsion

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Formation of zirconia foams using the thermostimulated sol-gel transition

In this paper we describe the production of zirconia-based foams by a novel thermostimulated sol-gel route, that employs the foaming of colloidal suspensions prior to the sol-gel transition promoted by small increase of temperature (congruent to3 degreesC). This method produces gelled bodies having porosity >70% in the wet stage, and can be used to produce complex-shaped components. The effect of a foaming agent (Freon11 or CCl3F) and surfactant content on the formation and stability of the foams was analyzed. The rheologic measurements demonstrate that by increasing the surfactant concentration, the gelation time decreases increasing foam stability. As the surfactant concentration and quantity of foaming agent increase, the density decreases and the porosity increases. Hg porosimetry results show that the dry foam presents a bimodal pore size distribution. The family of sub-micrometer pores was attributed to the formation of a microemulsion between Freon11 and water. Scanning electron microscopy analysis shows that the foam structure consists of a three-dimensional network of spherical pores, which may be open and interconnected or closed, at larger or smaller porosities, respectively. Finally these results show that the thermostimulated sol-gel transition provides a potential route for ceramic foam manufacture. (C) 2002 Elsevier B.V. B.V. All rights reserved.