Palaeosurfaces mapping and associated supergene copper deposits identification as mineral exploration tool Itapeva and Ribeirão Branco region – Ribeira Valley, state of São Paulo, Brazil

Alguns exemplos de formação de minério supérgeno e sua interação com a morfogênese (paleosuperfícies) e resistência mineralógica são discutidas aqui. Registros geomorfológicos e mineralógicos na caracterização paleosuperfícies associam o intemperismo de minerais primários e sua relação com as concentrações de cobre e minério de ferro no sudeste do estado de São Paulo, Brasil. Distinguiram-se duas paleosuperfícies geradas por várias fases de intemperismo e controladas pela estrutura geológica. A primeira, mais antiga, é a paleosuperfície superior (900 - 1000 m de altitude), situado em Ribeirão Branco (Alto do Brancal), foram desenvolvidas em rochas silico-calcários. É formada por lateritas de ferro enriquecido por produtos secundários de cobre. O segundo nível de paleosuperfície é mais novo está localizado na região de Itapeva (Santa Blandina e Bairro do Sambra). Esta paleosuperfície é formada por percolação de cobre através da rocha alterada (saprolito). Outras características podem ser observadas como produtos neoformados em lateritas. Eles são classificados em dois tipos: a argila como produtos silico-cuprífero (com quantidades significativas de ferro) e de cobre minerais (crisocola, fixas nas vertentes). Essas feições reconheceram a presença de minérios de cobre e seu controle morfogénetico ajudando na exploração e prospecção de minérios supérgenos.

Mapeamento de Paleosuperfícies associadas a identificação de depósitos supérgenos de cobre como ferramenta de exploração mineral na região de Itapeva e Ribeirão Branco- Vale do Ribeira, estado de São Paulo, Brasil

A few examples of supergene ore formation and their interaction with morphogenesis (palaeosurfaces) and weathering mineralogy are discussed. Geomorphological and mineralogical records to characterize palaeosurfaces associate the weathering of primary minerals and their relationship with concentrations of cooper and iron ore deposits in southeastern state of São Paulo, Brazil. We have distinguished two palaeosurfaces generated by several weathering phases and controlled by the geological framework. The first and oldest upper palaeosurfaces (900 - 1000 m a.s.l.), situated in Riberão Branco (Alto do Brancal), were developed on silico-limestones. It is formed by typical iron laterites enriched by secondary products of cooper. The second and younger level palaeosurfaces located in Itapeva (Santa Blandina and Bairro do Sambra). This palaeosurface is formed by copper percolating through the weathered rock (saprolite). Other features can be observed like neo-formed products in laterites. They are classified into two types: clay like silico- cupriferous products (with noticeable amounts of iron) and copper minerals (crysocolla, in their flat slopes). These features allowed the presence of copper ores and their morphogenesis control will help in the exploration and prospecting of supergene ore mineral.

Geoelectrical prospection of disseminated sulfide mineral occurrences in Camaquã Sedimentary Basin, Rio Grande do Sul State, Brazil

The mineral exploration is a complex activity that should involve a combination of direct and indirect techniques of geological investigation. The growing demand for base metals in the national and international market provides the revaluation of mineral occurrences that can become deposits and mines. This paper presents the results of the electrical resistivity and induced polarization geophysical methods in azimuthal arrangement, applied in a mineral occurrence of disseminated copper sulfides, previously studied through trenches and core drilling, located in the Camaquã Sedimentary Basin, Rio Grande do Sul State, Brazil. The inversion models indicate the coincidence of high chargeability and low resistivity values. The integration of geophysical data permitted the elaboration of 3D attributes visualization models for the mineralization enclosed in volcanic tuffs. The integrated geophysical and geological analysis indicates the potential of a new mineralized area. © 2012 Sociedade Brasileira de Geofísica.

Definição da assinatura geoquímica multielemento secundária dos depósitos Canoas e Perau - Vale do Ribeira - PR e sua aplicação como ferramenta na seleção de novas áreas potenciais para pesquisa mineral

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Magnetometric exploration in intrusive basic with evidence of gold in northern region of the Camaquã Sedimentary Basin (RS)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bayesian and multivariate methods applied to favorability quantification in recôncavo Basin and Ribeira Belt, Brazil

A methodology to define favorable areas in petroleum and mineral exploration is applied, which consists in weighting the exploratory variables, in order to characterize their importance as exploration guides. The exploration data are spatially integrated in the selected area to establish the association between variables and deposits, and the relationships among distribution, topology, and indicator pattern of all variables. Two methods of statistical analysis were compared. The first one is the Weights of Evidence Modeling, a conditional probability approach (Agterberg, 1989a), and the second one is the Principal Components Analysis (Pan, 1993). In the conditional method, the favorability estimation is based on the probability of deposit and variable joint occurrence, with the weights being defined as natural logarithms of likelihood ratios. In the multivariate analysis, the cells which contain deposits are selected as control cells and the weights are determined by eigendecomposition, being represented by the coefficients of the eigenvector related to the system's largest eigenvalue. The two techniques of weighting and complementary procedures were tested on two case studies: 1. Recôncavo Basin, Northeast Brazil (for Petroleum) and 2. Itaiacoca Formation of Ribeira Belt, Southeast Brazil (for Pb-Zn Mississippi Valley Type deposits). The applied methodology proved to be easy to use and of great assistance to predict the favorability in large areas, particularly in the initial phase of exploration programs. © 1998 International Association for Mathematical Geology.

Diagnosis of a compacted area for mining through the mechanical resistance to the penetration using geostatistical methods in the Amazon Forest

The mining process promotes land modification and complete landscape alteration. Those alterations in the surface are shown more obviously in the aesthetical aspect as the visual elements of form, texture, climbs, complexity and color which composes the landscape. As a consequence, mining has impacts on the topography, in the soil, in the vegetation and in the area's drainage, with a direct influence on the enterprise. A quite common problem in the recovery of degraded areas in mineral exploration is the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is an increase of the mechanical resistance to the penetration of plant roots, a reduction of the aeration, an alteration of the flow of water and heat, also in the availability of water and nutrients. Thus, the present work had the basic objective of diagnosing the compaction of an area degraded by mining in a spacial way, through the mechanical resistance and the penetration, to guide the future subsoiling in the area requiring recovery. Through the studies, it was concluded that the krigagem method in agreement with the space variation allows the division of the area under study into sub areas facilitating a future work to reduce costs and unnecessary interference to the atmosphere. The method was shown to be quite appropriate and it can be used in the diagnosis of compaction in a degraded area by mining, foreseeing the subsoiling requirement.

Diagnóstico de uma área compactada por atividade minerária, na floresta amazônica, empregando métodos geoestatísticos à variável resistência mecânica à penetração do solo

A quite common problem in the recovery of degraded areas in the mineral exploration understands the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is: increase of the mechanical resistance to the penetration of the rooats, reduction of the aeration, alteration of the water flow and heat. Thus the present work had the basic objective of diagnosing the compaction of a degraded area by mining in a space way, through the mechanical resistance the way penetration to guide a future subsoiling in the place seeking recovery. Through the studies it was concluded that the kriging method in agreement with the space variation allows the division of the area studies in sub areas facilitating a future work to reduce cost and unnecessary interference to the atmosphere. The method was shown quite appropriate and it can be used in diagnosis of the compaction in a degraded area by mining, foreseeing subsoiling need.

Caracterização dos impactos ambientais da indústria oleira e mineração na sub-bacia do ribeirão Jacutinga - município de Rio Claro e Corumbataí (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Área de degradação urbana: uma questão socioeconômica e ambiental no bairro Santo Antônio, Teresina - Piauí

Pós-graduação em Geografia - IGCE

Geological and geophysical data integration for delimitation of mineralized areas in a supergene manganese deposits

Geophysical methods are widely used in mineral exploration. This paper discusses the results of geological and geophysical studies in supergene manganese deposits of southern Brazil. Mineralized zones as described in geological surveys were characterized as of low resistivity (20 Omega.m) and high chargeability (30ms), pattern found also in oxides and sulfite mineral deposits. Pseudo-3D modeling of geophysical data allowed mapping at several depths. A relationship between high chargeability and low resistivity may define a pattern for high grade gonditic manganese ore. Large areas of high chargeability and high resistivity may result in accumulation of manganese and iron hydroxides, due to weathering of the gonditic ore, dissolution, percolation and precipitation.

Caracterização geofísica no Gabro Santa Catarina, São Sepé (RS)

Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.

Emprego do método eletromagnético (em) na investigação e mapeamento de contaminações geradas por cemitérios: o caso de Monte Alto/SP

The use of geophysical methods in the analysis and mapping of likely contamination plumes has shown a huge value in the development of researches related to environmental issues. Among the main geophysical methods applied to this purpose, the geoelectrical methods stand out, being based on the use of electric and electromagnetic fields. The electromagnetic method (EM) uses physical environment responses created by electromagnetic field propagation, consisting of an alternated electric output and a magnetization force, used to obtain the electric conductivity (σ) of the subsurface materials. It has a broad application in the mineral exploration and prospection, and its use has been also efficient in environmental researches. By the electromagnetic method, this work examined and mapped possible contaminations created by cemetery leachate in the Saudade's Cemetery, located in the city of Monte Alto, Sao Paulo, where sedimentary rocks of the Bauru Group are exposed. Cemetery leachate is a putrefactive liquid, generated from the decomposition of organic matter, which contains substances that can contaminate soil and groundwater. Results achieved in this work show that the use of the electromagnetic method is an important indirect tool in the investigation of environmental contaminations in areas with highly contrasting physical properties

Identificação de áreas degradadas por extração de argila no município de Ourinhos (SP): recuperação do passivo ambiental e proteção dos recursos hídricos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Integração de dados geofísicos e geológicos na caracterização morfológica de ocorrência de cobre na borda norte da Bacia do Camaquã (RS)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)