Effects of pre-slaughter fasting on broiler welfare, meat quality, and intestinal integrity

The Brazilian Ministry of Agriculture (MAPA) regulations establish 12 hours as the maximum pre-slaughter fasting period for broilers; however, many processing plants have considered this time is not sufficient, and consequently return the birds to the farms, with consequent economic losses and welfare problems. Therefore, it is necessary to investigate the possible effects of longer pre-slaughter fasting times. The objective of the present study was to evaluate the effect of pre-slaughter fasting times longer than those established by MAPA on broiler welfare, breast meat quality, and intestinal integrity. Forty 42-d-old broilers were submitted to different pre-slaughter fasting times: group I: 6 hours, group II 9h, group III 12h, and group IV 15h. Bird welfare was assessed before slaughter. After sacrifice, intestinal samples were collected to assess their morphology and morphometrics, and the Pectoralis major muscle was analyzed for pH and color. There was no influence (p>0.05) of treatments on breast muscle pH or color.There were no significant changes in intestinal morphometrics (p<0.05). Bird behavior was affected (p<0.05), suggesting that welfare was impaired as fasting time increased, but no differences in the analyzed parameters were detected between broilers fasted for 12 or 15 hours. It was concluded that the behavioral differences between birds fasted for 12 and 15 hours are not sufficient to assert that those fasted for 15 hours were in worse welfare conditions.

Distribution of Taenia saginata metacestodes: a comparison of routine meat inspection and carcase dissection results in experimentally infected calves

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualitative-feed-restricted heavy swine: meat quality and morpho-histochemical characteristics of muscle fibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relative development of tissues, commercial meat cuts and live weight components in Saanen goats

Objetivando avaliar o desenvolvimento relativo dos componentes do peso vivo (PV), dos cortes comerciais e dos tecidos da carcaça, utilizaram-se 40 cabritos Saanen. Os animais foram abatidos ao atingir 5,0; 12,5; 20,0; 27,5 e 35,0 kg de PV e a carcaça foi seccionada em paleta, pescoço, 1ª a 5ª costelas, 6ª a 13ª costelas, peito/fralda, lombo e perna. A perna foi dissecada em ossos, músculos e gordura. Utilizou-se a equação alométrica Y=aXb para estimar o desenvolvimento relativo. O crescimento do tecido ósseo foi precoce, o do tecido muscular intermediário e o da gordura crescimento tardio, uma vez que a gordura subcutânea é depositada mais tardiamente. Os cortes comerciais apresentaram coeficiente de alometria isogônico, com exceção do corte da 6ª a 13ª costelas e do peito/fralda. O desenvolvimento da carcaça e dos não-componentes da carcaça acompanhou o peso de corpo vazio. Cabritos com 35 kg de PV possuem proporção de músculos e relação músculo:osso adequadas, mas apresentam proporção de gordura maior que a observada nos animais abatidos com 20 kg de PV.

Identification and migration of degradation compounds from irradiation of multilayer polyamide 6 films for meat foodstuffs and cheese

The aim of this work was to identify the degradation compounds produced during irradiation of multilayer polyamide 6 (PA-6) films and to study their migration into water and 95% ethanol food simulant. After irradiation of multilayer PA-6 films at 3, 7 and 12 kGy, degradation compounds were extracted using solid-phase microextraction, for which the time and temperature of extraction and stirring were optimized, and identified by gas chromatography-mass spectrometry. Caprolactam, 2-cyclopentylcyclopentanone and aldehydes, among other compounds, were identified in the headspace of the films. Polydimethylsiloxane was considered the best fiber for extraction. The optimum conditions of time, temperature and stirring to extract the compounds were 20 min, 80 degrees C and 225 rpm. For validation purposes, the compounds were quantified in water and 95% ethanol and the results showed high sensitivity, good precision and accuracy. Migration of compounds from irradiated and non-irradiated multilayer PA-6 films into water and 95% ethanol food simulants was carried out at 40 degrees C for 10 days. The method was efficient for the quantification of decaldehyde, 2-cyclopentylcyclopentanone and caprolactam that migrated from multilayer PA-6 films into food simulants.

Efficiency of prebiotics and probiotics on the performance, yield, meat quality and presence of Salmonella spp in carcasses of free-range broiler chickens

Two trials were carried out in the present study. Trial I evaluated the performance, carcass yield and breast meat quality, whereas Trial II evaluated the efficacy of utilizing prebiotics + probiotics on the control of Salmonella spp incidence in the carcasses of free-range broilers. In Trial I, 688 one-day-old male chicks of the Naked Neck Label Rouge strain were used, distributed in a randomized block design arranged according to a 2 x 2 factorial: control diet or diet supplemented with probiotics and prebiotics; and two rearing systems (confined or with access to paddocks - 3m²/bird), using four replicates with 35 birds each. The birds were reared until 84 days of age following the recommendations of management and nutrition for free-range strains, and had access to paddocks after 35 days of age. Water and food were given inside the experimental poultry house. Birds fed probiotics and prebiotics in the diet and the confined birds showed better performance, carcass yield and meat quality compared to the birds of the other treatments. In Trial II, 128 one-day-old male chicks of the free-range Naked Neck Label Rouge strain were used. The birds were distributed into four treatments: NCC (non-challenged control), NCS (non-challenged supplemented), CC (challenged control) and CS (challenged supplemented). There were no significant effects of adding probiotics and prebiotics in the diet in regard to Salmonella enteritidis recovery from the carcasses.

Determination of nitrite in meat products and water using dapsone with combined spot test/diffuse reflectance on filter paper

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Performance, carcass traits, meat quality and economic analysis of feedlot of young bulls fed oilseeds with and without supplementation of vitamin E

The objective of this research was to evaluate average daily gain (ADG), carcass traits, meat tenderness and profitability of keeping cattle fed different oilseeds and vitamin E in feedlot. A total of 40 Red Norte young bulls with initial average body weight of 339±15 kg were utilized. The experimental design was completely randomized in a 2 × 2 factorial arrangement. The experiment lasted 84 days and experimental diets presented soybeans or cottonseeds as lipid sources associated or not to daily supplementation of 2,500 UI vitamin E per animal. The concentrate:roughage ratio was 60:40. Diets had the same amount of nitrogen (13% CP) and ether extract (6.5%). The data were analyzed by means of statistical software SAS 9.1. Neither vitamin supplementation nor lipid source affected ADG. There was no interaction between lipid source and vitamin supplementation for the variables studied. The inclusion of cottonseed reduced the carcass yield. There was no effect of diets on hot and cold carcass weights or prime cuts. The inclusion of cottonseed reduced the backfat thickness. No effect of experimental diets on the rib-eye area was observed. There was no effect of lipid source or vitamin supplementation on meat tenderness, which was affected, however, by ageing time. Diets with soybeans presented higher cost per animal. The utilization of soybean implied reduction of the gross margin (R$ 59.17 and R$ 60.51 for diets based on soy with and without supplemental vitamin, respectively, vs. R$ 176.42 and R$ 131.79 for diets based on cottonseed). The utilization of cottonseed enables improvement of profitability of feedlot fattening, in spite of negatively affecting some carcass characteristics.

Características sensoriais da carne de cordeiro maturada e injetada com cloreto de cálcio: Sensory characteristics of lamb meat ageing and injected with calcium chloride

Sensory characteristics of Morada Nova lambs meat (muscles Biceps femoris, Longissimus and Triceps brachii) submitted to effects of ageing and injection of calcium chloride were studied. The lambs were slaughtered at 25 kg of body weight. After rigor mortis, muscles were removed and submitted to treatments. The variance analysis indicated that ageing and calcium chloride didn't influence the attributes flavor (6.71) and tenderness (7.13) of meats from Biceps femoris. The interaction among the factors wasn't significant for tenderness, however it was significant for flavor. Ageing didn't affect colour (7.08), flavor (7.42), tenderness (7.83) and global impression (7.58) of meats from Longissimus without calcium chloride, and meats with calcium chloride also didn't affect. Ageing and calcium chloride factor didn't influence the attributes flavor and tenderness of meats from Triceps brachii. The interaction among the factors wasn't significant for attributes flavor and tenderness. The sensory quality of Morada Nova lambs meat, was shown similar with relationship to evaluated attributes when it was submitted to ageing and injection with calcium chloride.

Efeitos do ultrassom de alta intensidade sob pressão na redução de Listeria monocytogenes em extrato de carne bovina

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Identificação de práticas de gestão da cadeia de suprimentos adotadas no setor alimentício: estudo de múltiplos casos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Dependência e monopólio no comércio internacional de sementes transgênicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do processamento térmico sobre as propriedades mecânicas e microestruturais de um aço XC48 aplicado a componentes automotivos visando atendimento ao projeto ULSAB

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Discussão da utilização do controle estatístico de processo: análise bibliométrica e estudo de caso em uma empresa do setor alimentício

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Criação e implantação de procedimentos logísticos em uma indústria de móveis: estudo de caso

The Brazilian construction is with high production which resulted in many service industries and also for businesses that work in conjunction with it. For the furniture industries would not be different, since they are intimately involved with the construction. To meet the demand for furnishings in Brazil, some clusters of industries have developed in recent years, as in the case of Uba (MG), Arapongas (PR) and Bento Gonçalves (RS). For industries sector can always increase its production combining quality and customer satisfaction, is necessary for their production procedures are studied and improved every day. The aim of this research is to propose a solution for simple information system involving the issue of tracking parts of the furniture produced in an industry custom furniture that depend on outsourced services. The research occurred during four months of the year 2013 for the observation of the production of the industry, where possible observing interference could be carried out with the aim of obtaining improvements in the production line. It is concluded that control of the finished product in a custom furniture industry is a very complex work, because the information system must transmit information faithful, which has not happened formerly, but after the implementation of the identification system was significant improvement the transfer of information between sectors mounts internal and external furniture