Frugivory on Margaritaria nobilis L.f. (Euphorbiaceae): poor investment and mimetism.

Dehiscent fruits of Euphorbiaceae usually have two stages of seed dispersal, autochory followed by myrmecochory. Two stages of Margaritaria nobilis seed dispersal were described, the first stage autochoric followed by ornithocoric. Their dehiscent fruits are green and after they detached from the tree crown and fall on the ground, they open and expose blue metallic cocas. We studied the seed dispersal system of Margaritaria nobilis in a semi-deciduous forest in Brazil. In 80 h of focal observations, we recorded only 12 visits of frugivores, however the thrush Turdus leucomelas was the only frugivore that swallowed the fruits on the tree crown. Pitylus fuliginosus (Fringilidae) and Pionus maximiliani (Psittacidae) were mainly pulp eaters, dropping the seeds below the tree. on the forest floor, after fruits dehiscence, jays (Cyanocorax chrysops), guans (Penelope superciliaris), doves (Geotrygon montana) and collared-peccaries (Pecari tajacu) were observed eating the blue diaspores of M. nobilis. Experiments in captivity showed that scaly-headed parrots (Pionus maximiliani), toco toucans (Ramphastos toco), jays (Cyanochorax chrysops), and guans (Penelope superciliaris) consumed the fruits and did not prey on the seeds before consumption. The seeds collected from the feces did not germinate in spite of the high viability. The two stages of seed dispersal in M. nobilis resembles the dispersal strategies of some mimetic species. However M. nobilis seeds are associated with an endocarp, it showed low investment in nutrients, and consistent with this hypothesis, M. nobilis shared important characteristics with mimetic fruits, such as bright color display, long seed dormancy and protection by secondary compounds.

O modelo keynesiano de James Meade

Este artigo reavalia o modelo simplificado da Teoria Geral de Keynes elaborado por James Meade e procura complementar alguns dos argumentos teóricos que Meade deixou apenas indicados. O artigo também responde às solicitações de Frisch a Meade, quanto à explicação do significado de estabilidade e à explicitação dos pressupostos que garantem suas conclusões. Além disso, apresenta alguns dos cálculos não desenvolvidos por Meade, e, quando necessário, suas devidas correções.

Size-fecundity relationships and reproductive investment in female frogs in the Pantanal, south-western Brazil

The ovarian complement of anurans exhibiting different reproductive modes is highly diverse, and intraspecific variation in reproductive output of anurans is generally related to variation in female properties and/or environmental conditions. The size-fecundity relationships, reproductive investment, and correlation between ovary mass and fat body mass were investigated for females of an anuran assemblage in the Pantanal, Brazil. Female body size was positively correlated with clutch size among seven of the eight species analyzed. However, these results seem to be influenced by seasonal variation in fecundity. Interspecific size-fecundity relationships revealed that female SVL was positively correlated with clutch size and egg size regardless of reproductive mode. Among 11 species analyzed, the reproductive investment (RI: ovary mass relative to body mass) varied from 5.5 to 18%, and there were no differences among reproductive modes and activity patterns (explosive/prolonged). RI correlated negatively with female size. Among three Leptodactylus species examined, negative correlation between ovary mass and fat body mass was verified for two species. Variations in the reproductive strategies are closely related to the reproductive activity patterns and reproductive modes exhibited by individual species, but are also influenced by environmental conditions. However, regardless of reproductive mode or activity pattern, each species seems to exhibit a reproductive strategy that allows them to respond differently to the same environmental restrictions.

Influence of the final temperature of investment healting on the tensile strength and Vickers hardness of CP TI and TI-6AL-4V alloy

The aim of the work was to evaluate the influence of the temperature of investment healting on the tensile strength and Vickers hardness of CP Ti and Ti-6Al-4V alloy casting. Were obtained for the tensile strength test dumbbell rods that were invested in the Rematitan Plus investment and casting in the Discovery machine cast. Thirty specimens were obtained, fiftten to the CP Titanium and fifteen to the Ti-6Al-4V alloy, five samples to each an of the three temperatures of investment: 430°C (control group), 480°C and 530°C. The tensile test was measured by means of a universal testing machine, MTS model 810, at a strain of 1.0 mm/min. After the tensile strenght test the specimens were secctioned, embedded and polished to hardness measurements, using a Vickers tester, Micromet 2100. The means values to tensile tests to the temperatures 430°C, 480 and 530: CP Ti (486.1 - 501.16 - 498.14 -mean 495.30 MPa) and Ti-6Al-4V alloy (961.33 - 958.26 - 1005.80 - mean 975.13 MPa) while for the Vickers hardness the values were (198.06, 197.85, 202.58 - mean 199.50) and (352.95, 339.36, 344.76 - mean 345.69), respectively. The values were submitted to Analysis of Variance (ANOVA) and Tukey' s Test that indicate differences significant only between the materials, but not between the temperature, for both the materias. It was conclued that increase of the temperature of investment its not chance the tensile strength and the Vickers hardness of the CP Titanium and Ti-6Al-4V alloy.

Nest deprivation and mating success in Nile tilapia (Teleostei: Cichlidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Design and management optimization of trickle irrigation systems using non-linear programming

A non-linear model is presented which optimizes the lay-out, as well as the design and management of trickle irrigation systems, to achieve maximum net benefit. The model consists of an objective function that maximizes profit at the farm level, subject to appropriate geometric and hydraulic constraints. It can be applied to rectangular shaped fields, with uniform or zero slope. The software used is the Gams-Minos package. The basic inputs are the crop-water-production function, the cost function and cost of system components, and design variables. The main outputs are the annual net benefit and pipe diameters and lengths. To illustrate the capability of the model, a sensitivity analysis of the annual net benefit for a citrus field is evaluated with respect to irrigated area, ground slope, micro-sprinkler discharge and shape of the field. The sensitivity analysis suggests that the greatest benefit is obtained with the smallest microsprinkler discharge, the greatest area, a square field and zero ground slope. The costs of the investment and energy are the components of the objective function that had the greatest effect in the 120 situations evaluated. (C) 1996 Academic Press Limited

A mixed-integer linear programming approach for optimal type, size and allocation of distributed generation in radial distribution systems

This paper presents a mixed-integer linear programming approach to solving the problem of optimal type, size and allocation of distributed generators (DGs) in radial distribution systems. In the proposed formulation, (a) the steady-state operation of the radial distribution system, considering different load levels, is modeled through linear expressions; (b) different types of DGs are represented by their capability curves; (c) the short-circuit current capacity of the circuits is modeled through linear expressions; and (d) different topologies of the radial distribution system are considered. The objective function minimizes the annualized investment and operation costs. The use of a mixed-integer linear formulation guarantees convergence to optimality using existing optimization software. The results of one test system are presented in order to show the accuracy as well as the efficiency of the proposed solution technique.© 2012 Elsevier B.V. All rights reserved.

Viabilidade econômica para produção de mel em propriedade familiar

Em 2009, o Brasil quebrou o seu recorde de exportação de mel, gerando receita superior a US$ 65 milhões. Entretanto, existe uma lacuna nos aspectos econômicos, para grande parte dos apicultores inseridos nesta cadeia. Desta forma, levantou-se o investimento necessário para a produção de mel, em uma propriedade familiar de Cajuru (SP), com estimativas de investimento e custos de produção baseados no Custo Operacional Total (COT) utilizado pelo Instituto de Economia Agrícola, obtendo-se R$ 97.093,00 como valor total do investimento. Para a análise econômica, avaliando-se a produção de mel originária de flor de laranjeira e silvestre, o custo operacional total foi de R$ 16.400,13, considerando-se que as despesas com insumos perfizeram 70% do Custo Operacional Efetivo (COE) e 26% do COT, obtendo-se índice de lucratividade de 46%. em relação ao ponto de nivelamento, o apicultor precisa produzir 4.659 kg de mel, ou vender ao preço mínimo de R$ 1,93/kg a produção obtida, para cobrir os custos. Constatou-se, com base no fluxo de caixa, TIR de 7,24% e que o investimento inicial retorna em 10 anos, mostrando resultados atrativos para este segmento agropecuário, considerando-se a racionalidade de uso dos fatores de produção, bem como um aumento progressivo na quantidade produzida.

Market-driven security-constrained transmission network expansion planning

This paper presents a Bi-level Programming (BP) approach to solve the Transmission Network Expansion Planning (TNEP) problem. The proposed model is envisaged under a market environment and considers security constraints. The upper-level of the BP problem corresponds to the transmission planner which procures the minimization of the total investment and load shedding cost. This upper-level problem is constrained by a single lower-level optimization problem which models a market clearing mechanism that includes security constraints. Results on the Garver's 6-bus and IEEE 24-bus RTS test systems are presented and discussed. Finally, some conclusions are drawn. © 2011 IEEE.

Projeto de Produção e Processo de Pré-fabricação de Componentes de Bambu

The design and production process of the workshop shed made of bamboo presented in this paper is the result of almost two years of cooperation between Viverde Farmers Association, Universidade Estadual Paulista and Unisol. The system consists of rounded aroeira pillars, a roof structure formed by in natura bamboo frames and metal connections. The development of the parts and connections detailing, through the technical drawing of each component, enabled the development of standardized precision fittings aiming at optimizing the execution and saving time, energy and raw material on the assembly line. In this process, the creation and improvement of templates was necessary in order to facilitate the assembly of parts. The component assembly phases were recorded at the Experimental Laboratory for Bamboo and Wood Processing - UNESP/FEB. The results showed the good performance of the pre-fabrication process of bamboo components.

Periodicity in a delayed version of the kaldor trade cycle model

We are concerned with the Kaldor's trade cycle model under the effect of a delay which represents a gestation lag between a decision of investment and its effect on the capital stock. Taking the adjustment coefficient in the goods market as a bifurcation parameter, we achieve global branches of periodic solutions. In our setting the delay is a constant inherent to the specific economy. Copyright © 2013 Watam Press.

Análise e implementação de um algoritmo de busca dispersa para o planejamento da expansão de sistemas de transmissão

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Política fiscal e restrições tributárias: aspectos práticos dos efeitos restritivos tributários sobre a atividade econômica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do aproveitamento do gás natural em plantas de cogeração e trigeração de energia em indústrias frigoríficas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ensaios sobre o investimento direto externo: os casos das empresas espanholas e coreanas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)