Effects of Low Molecular Weight Sulfated Galactan Fragments From Botryocladia Occidentalis on the Pharmacological and Enzymatic Activity of Spla2 From Crotalus Durissus Cascavella

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of food restriction on the reproduction and larval performance of matrinxã, Brycon amazonicus (Spix and Agassiz, 1829)

Este estudo avaliou o efeito da restrição alimentar e realimentação na reprodução de fêmeas e no crescimento inicial e sobrevivência de larvas de matrinxã, Brycon amazonicus. Matrizes distribuídas em 8 viveiros (15 peixes/tanque) foram alimentadas diariamente (em 4 tanques - G1) e alimentados em ciclos de 3 dias de alimentação seguidos de 2 dias de restrição (em 4 tanques - G2) por 6 meses antes da desova. Na indução à desova, 57% das fêmeas no G1 e 45% no G2 desovaram. Os pesos médios dos oócitos foram 208,1 g (G1) e 131,6 g (G2), sendo os oócitos G2 menores (1,017 ± 0,003 mm) que os oócitos de G1 (1,048 ± 0,002 mm). As taxas de fertilização (71,9 ± 12,6% e 61,2 ± 13,7%) e de eclosão (61,3 ± 33,9% e 67,5 ± 23,4%) entre os G1 e G2 não diferiram. Larvas foram coletadas na eclosão e às 24, 48 e 72 horas de incubação para medida do crescimento e as restantes transferidas para aquários e amostradas 1, 5, 9 e 15 dias depois. Na transferência, as larvas G1 e G2 tinham pesos similares (1,5 ± 0,15 e 1,46 ± 0,07 mg), mas o comprimento das larvas G2 era maior (6,2 ± 0,13 e 6,7 ± 0,14 mm). Ao 9° dia, quando é recomendada a transferência dos juvenis para tanques externos, os juvenis G2 tinham peso (13,6 ± 0,26 e 18,9 ± 0,07 mg) e comprimento (11,8 ± 0,09 e 14,5 ± 0,04 mm) maiores, mas no 15º dia os juvenis G1 eram maiores em peso (90,2 ± 1,19 e 68,6 ± 0,77 mg) e comprimento (18,8 ± 0,16 e 18,5 ± 0,04 mm). Aos 15 dias, a prole das fêmeas submetidas à restrição alimentar apresentou sobrevivência mais alta que a prole das fêmeas alimentadas diariamente (24,7 ± 2,07% e 19,2 ± 1,91%). A restrição alimentar imposta às fêmeas de matrinxã, apesar de reduzir o número de fêmeas que desovaram e a quantidade de oócitos extrusados, não afetou a fertilização e eclosão das larvas e melhorou a sobrevivência final das larvas.

Morphological Notes on the Worker and Queen Larvae of the Thief Ant Solenopsis helena (Hymenoptera, Formicidae, Myrmicinae) from Brazil

Young and mature larvae of queen and workers of the thief ant, Solenopsis helena, are herein described for the first time. Specimens were treated and described by usual methods of light and scanning electron microscopy. Many of the observed characteristics confirmed traits of the thief ant larva, reinforcing the assumption that they are a distinct group from fire ants. The larva of S. helena can be recognized from other close species by details of the mouthparts, but seem extensively similar to Solenopsis molesta. These findings are useful for taxonomic studies and phylogenetic inferences.

Soil-liming effects on the development and nutritional status of the carambola tree and its fruit-yielding capacity

Soil acidity is one of the most important factors limiting agricultural production in the tropics. For this reason, the objective of this research work was to evaluate the effects of soil liming on the performance of carambola (Averrhoa carambola) trees. The experiment took place at the Citrus Experimental Station in Bebedouro, state of São Paulo, Brazil. The soil was a Typic Haplustox (V = 26% at the 0- to 20-cm layer) between August 1999 and July 2003. The following doses of limestone were employed: 0, 1.85, 3.71, 5.56, and 7.41 t ha(-1). During 40 months after the experiment was set up, soil chemical attributes were periodically examined. For a period of 2 years, the trees had their leaves analyzed for micro-and macronutrients; their trunk diameter, height, and crown volume measured; and the production of fruits determined. Liming improved in evaluated chemical attributes of the soil: pH, calcium (Ca), magnesium (Mg), BS, V, and hydrogen and aluminium (H + At) from the upper 60 cm of soil when the samples were taken from both the line and between the lines of plants. In the leaves, the levels of Ca and Mg also increased. The highest fruit yields were observed when soil base saturations reached 45% on the lines and 50% between the lines, as well as when foliar levels of 8.0 g of Ca and 4.7 a of Mg per kilogram of leaves were attained.

Modelling the effect of the physical and chemical characteristics of the materials used as casing layers on the production parameters of Agaricus bisporus

The aim of this research was to show the mathematical data obtained through the correlations found between the physical and chemical characteristics of casing layers and the final mushrooms' properties. For this purpose, 8 casing layers were used: soil, soil + peat moss, soil + black peat, soil + composted pine bark, soil + coconut fibre pith, soil + wood fibre, soil + composted vine shoots and, finally, the casing of La Rioja subjected to the ruffling practice. The conclusion that interplays in the fructification process with only the physical and chemical characteristics of casing are complicated was drawn. The mathematical data obtained in earliness could be explained in non-ruffled cultivation. The variability observed for the mushroom weight and the mushroom diameter variables could be explained in both ruffled and non-ruffled cultivations. Finally, the properties of the final quality of mushrooms were established by regression analysis.

Periodic study on the structural and electronic properties of bulk, oxidized and reduced SnO2(110) surfaces and the interaction with O-2

The structural and electronic properties of bulk and both oxidized and reduced SnO2(110) surfaces as well as the adsorption process of O-2 on the reduced surface have been investigated by periodic DFT calculations at B3LYP level. The lattice parameters, charge distribution, density of states and band structure are reported for the bulk and surfaces. Surface relaxation effects have been explicitly taken into account by optimizing slab models of nine and seven atomic layers representing the oxidized and reduced surfaces, respectively. The conductivity behavior of the reduced SnO2(110) surface is explained by a distribution of the electrons in the electronic states in the band gap induced by oxygen vacancies. Three types of adsorption approaches of O-2 on the four-fold tin at the reduced SuO(2)(110) surface have been considered. The most exothermic channel corresponds to the adsorption of O-2 parallel to the surface and to the four-fold tin row, and it is believed to be associated with the formation of a peroxo O-2(2-) species. The chemisorption of O-2 on reduced SnO2(110) surface causes a significant depopulation of states along the band gap and it is shown to trap the electrons in the chemisorbed complex producing an electron-depleted space-charge layer in the inner surface region of the material in agreement with some experimental evidences. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Evaluation of WC-17Co and WC-10Co-4Cr thermal spray coatings by HVOF on the fatigue and corrosion strength of AISI 4340 steel

It is known that chromium electroplating is related to the reduction in the fatigue strength of base metal. However, chromium results in protection against wear and corrosion combined with chemical resistance and good lubricity. Environmental requirements are an important point to be considered in the search for possible alternatives to hard chrome plating. Aircraft landing gear manufactures are considering WC thermal spray coating applied by the high-velocity oxygen-fuel (HVOF) process an alternative candidate, which shows performance at least comparable to results, obtained for hard chrome plating. The aim of this study is to compare the influence of WC-17Co and WC-10Co-4Cr coatings applied by HVOF process and hard chromium electroplating on the fatigue strength of AISI 4340 steel, with and without shot peening. S-N curves were obtained in axial fatigue test for base material, chromium plated and tungsten carbide coated specimens. Tungsten carbide thermal spray coating results in higher fatigue strength when compared to hard chromium electroplated. Shot peening prior to thermal spraying showed to be an excellent alternative to increase fatigue strength of AISI 4340 steel. Experimental data showed higher axial fatigue and corrosion resistance in salt fog exposure for samples WC-10Co-4Cr HVOF coated when compared with WC-17Co. Fracture surface analysis by scanning electron microscopy (SEM) indicated the existence of a uniform coverage of nearly all substrates. (C) 2004 Elsevier B.V. All rights reserved.

Evaluation of the effect of the stoichiometric ratio of Ca/Cu on the electrical and microstructural properties of the CaCu3Ti4O12 polycrystalline system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of glass forming histories on the structural and thermal properties of tellurite glasses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Association of diabetes and cigarette smoke exposure on the glycemia and liver glycogen of pregnant Wistar rats

Purpose: To evaluate cigarette smoke exposure and/or diabetes association effects on the glycemia and liver glycogen levels of pregnant Wistar rats. Methods: 60 adult rats were randomly distributed into (n= 10/group): non-diabetic exposed to filtered air (G1); non-diabetic exposed to cigarette smoke only before pregnancy (G2); non-diabetic exposed to cigarette smoke before and during pregnancy (G3); diabetic exposed to filtered air (G4); diabetic exposed to cigarette smoke only before pregnancy (G5), and diabetic exposed to cigarette smoke before and during pregnancy (G6). Glycemia was determined at days 0 and 21 of pregnancy. Liver samples were collected for liver glycogen determinations. Results: At day 21 of pregnancy, glycemia was higher in G5 and G6 compared to G4 group. G2 (2.43 +/- 0.43), G3 (3.20 +/- 0.49), G4 (2.62 +/- 0.34), G5 (2.65 +/- 0.27) and G6 groups (1.94 +/- 0.35) presented decreased liver glycogen concentrations compared to G1 (4.20 +/- 0.18 mg/100mg liver tissue) (p<0.05). G5 and G6 groups presented decreased maternal weight gain and litter weight. Conclusions: Severe diabetes and cigarette smoke exposure, alone or associated, caused impairment in liver glycogen storage at term pregnancy. Due to the fact that liver glycogen storages were considered determinant for glucose tolerance, it is relevant to point out a rigid clinical glycemic control and to stop smoking so earlier in pregnancy programming.

Effect of free-choice feeding on the performance and ileal digestibility of nutrients in broilers

An experiment was conducted to study ileal digestibility of nutrients and to verify the ability of broilers to select feed in order to meet their requirements for protein and energy. The treatments consisted of six diets: R+S: free-choice feeding with rice bran (energy) and soybean meal (protein); C+G: free-choice feeding with corn (energy) and corn gluten meal (protein); R+G: free-choice feeding with rice bran (energy) and corn gluten meal (protein); C+S: free-choice feeding with corn (energy) and soybean meal (protein); R+C+G+S: free-choice feeding with rice bran and corn (energy) and corn gluten meal and soybean meal (protein); and BD: basal diet represented by a complete diet composed of 63% corn and 33% soybean meal. The results indicated that the adjustment to nutritional requirements does not depend only on the ability of birds to select feed. It might also depend on intake and ingredient quality, since some ingredients did not provide a balanced amount of nutrients. The birds were able to fulfill their requirements for maintenance, that is, they consumed the minimum amount of amino acids (g per day) for maximum growth. The free-choice group with corn gluten meal as the protein source had the worst performance, which indicated that this feed is not recommended as a primary source of amino acids for broilers. The C+G diet presented the highest digestibility coefficient of dry matter and crude protein, whereas the C+S diet resulted in the highest digestibility coefficient of ether extract and nitrogen-free extract, indicating that diet digestibility was affected by the type of feed used as energy and protein sources. In general, the high digestibility values indicate that broilers are able to efficiently digest and absorb the supplied feed.

Beak trimming methods and their effect on the performance and egg quality of Japanese quails (Coturnix japonica) during lay

A total number of 720 Japanese quail females, reared under identical management conditions, and receiving feed and water ad libitum, was used. Quails were housed and reared from 1-35 days of age in litter pens in a rearing house, and then were transferred to a quail layer house. This study aimed at verifying if different beak trimming method could optimize egg production and quality by reducing stress and cannibalism among birds. A completely randomized experimental design was used, with six treatments in a 2x3 factorial arrangement, with two beak trimming ages (14 and 21 days) and three beak trimming variants (non-trimmed, 1/3 of the beak trimmed, or 1/2 of the beak trimmed), 6 replicates of 20 birds each. Performance was evaluated by feed intake, percentage of lay, egg mass, feed conversion ratio per dozen and per kg eggs, and mortality. Performance was influenced by trimming variant, with the best results obtained by birds with intact and those with 1/3 of the beak trimmed. Better specific gravity was in quails submitted to beak trimming at 21 days of age, whereas other egg quality parameters did not present significant results. Based the results obtained in the present study, it is recommended to submit to beak trimming either at 14 or 21 days of age.

Forced-Molting methods and their effects on the performance and egg quality of japanese quails (Coturnix japonica) in the second laying cycle

The experiment was carried out in the experimental poultry house of the Research and Development Unit of Brotas of Agência Paulista de Tecnologia dos Agronegócios do Centro-Oeste, SP, Brazil. The objective of the study was to evaluate the performance of Japanese quails submitted to forced molting aiming at optimizing the use of the same quail flock by promoting a second laying cycle. A total number of 400 67-day-old Japanese quails in lay, previously submitted to 14 days of forced molting, was distributed in a completely randomized experimental design into five treatments (T1= not submitted to forced molting, T2= 03 days of fasting + fed ad libitum, T3= 01 days of fasting + 13 days of feed restriction, T4= 02 days of fasting + 12 days of feed restriction, and T5= 03 days of fasting + 11 days of feed restriction. Feeds were contained equal nutrient levels, and were formulated according to NRC (1994) recommendations. There were significant differences among the studied treatments. Although the treatment of 3 days of fasting followed by ad libitum feeding resulted in lower egg weight, it promoted better lay percentage, egg mass, and feed conversion ratios (FCR/dz and FCR/kg). on the other hand, 3 days of fasting followed by restricted feeding resulted in higher feed intake and worse feed conversion ratios (FCR/dz and FCR/kg). When birds were not submitted to forced molting, they presented lower lay percentage and egg mass.

The effects of alternative forced-molting methods on the performance and egg quality of commercial layers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)