Utilization of macrophyte biofilter in effluent from aquaculture: I. Floating plant

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Amylase utilization for the extrusion of dog diets

Effects of amylase addition on extruder parameters, cost of extrusion, kibble quality and digestibility of dog food were measured in two separate experiments. In experiment 1, 120 kilo-novo-alpha-amilase-unit (KNU)/kg of heat stable alpha-amylase produced by Bacillus licheniformis was added in liquid form during a preconditioning period. In experiment 23684 KNU/kg of heat stable alpha-amylase produced by Aspergillus oryzae was mixed with the ingredients before extrusion. The diets were processed in a single screw extruder and submitted to digestibility and on experiment 1 also to palatability tests. Digestibility was tested using 12 dogs, six per diet. Data were submitted to analysis of variance followed by F-test. Amylase addition altered extrusion parameters in both experiments (P<0.05), with higher output (kg of dry matter [DM]/h: 28% and 43% higher in experiments 1 and 2) and less electric energy consumption (kW to produce 100 kg DM: 22% and 29% lower in experiments 1 and 2). Kibble appearance and quality [density (g/L), cutting force (g), and starch gelatinization degree (%)] did not change with enzyme treatment (P>0.05). Likewise, enzyme addition did not change nutrient digestibility, fecal dry matter or food palatability (P<0.05). Taken together our results suggest that amylase promoted the breakdown of amylose chains, thereby reducing the dough viscosity and resistance inside the extruder which allowed for higher product flow and less electricity energy consumption without altering food quality. (C) 2012 Elsevier B.V. All rights reserved.

Kinetic Analysis of Substrate Utilization by Native and TNAP-, NPP1-, or PHOSPHO1-Deficient Matrix Vesicles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pearl millet utilization in ccommercial laying hen diets formulated on a total or digestible amino acid basis

An experiment was carried out to evaluate the effect of replacing corn with pearl millet in commercial layer diets, formulated according to the minimal requirements for total and digestible amino acids. Two hundred and forty Lohmann LSL laying hens with 25 weeks of age were distributed in a completely randomized experimental design according to a 2 x 5 factorial arrangement with 3 replicates of 8 birds. Feed was formulated on two amino acid basis (total or digestible) according to Rostagno et al. (2000) and there were five pearl millet inclusion levels (0%, 25%, 50%, 75%, and 100%). Performance and egg quality were evaluated during five periods of 21 days.At the end of each period, feed intake, egg production, egg weight and feed conversion were evaluated. In the last three days of each period, the following egg quality parameters were evaluated: Haugh Unit, yolk pigmentation index, egg specific weight, shell percentage and shell thickness. Digestible amino acid requirements resulted in decreased feed intake (p<0.01) and increased production costs per mass of eggs (kg) or per dozen eggs (p<0.01) compared to total amino acid requirements. There was a linear reduction in feed intake, egg production, egg weight and yolk pigmentation index with increasing inclusion levels of pearl millet. Therefore, increasing levels of replacement of corn by pearl millet affected bird performance negatively. Besides, production costs were higher with increasing pearl millet levels.

Modeling energy utilization in broiler breeders, laying hens and broilers

The factorial approach has been used to partition the energy requirements into maintenance, growth, and production. The coefficients determined for these purposes can be used to elaborate energy requirement models. These models consider the body weight, weight gain, egg production, and environmental temperature to determine the energy requirements for poultry. Predicting daily energy requirement models can help to establish better and more profitable feeding programs for poultry. Studies were conducted at UNESP-Jaboticabal to determine metabolizable energy (ME) requirement models for broiler breeders, laying hens, and broilers. These models were evaluated in performance trials and provided good adjustments. Therefore, they could be used to establish nutritional programs. This review aims to outline the results found at UNESP studies and to show the application of models in nutritional programs for broiler breeders, laying hens, and broilers.

Utilization of autogenous bone, bioactive glasses, and calcium phosphate cement in surgical mandibular bone defects in Cebus apella monkeys

Purpose: the purpose of the present study was to evaluate the histologic results of bone cavities that were surgically created in the mandibles of Cebus apella monkeys and filled with autogenous bone, PerioGlas, FillerBone, or Bone Source. Materials and Methods: Surgical cavities 5 mm in diameter were prepared through both mandibular cortices in the mandibular angle region. The cavities were randomly filled, and the animals were divided into groups according to the material employed: Group 1 cavities were filled with autogenous corticocancellous bone; group 2 cavities were filled with calcium phosphate cement (BoneSource); and group 3 and group 4 cavities were filled with bioactive glass (FillerBone and PerioGlas, respectively). After 180 days the animals were sacrificed, and specimens were prepared following routine laboratory procedures for hematoxylin/eosin staining and histologic evaluation. Results: the histologic analysis showed that autogenous bone allowed total repair of the bone defects; bioactive glasses (FillerBone and PerioGlas) allowed total repair of the defects with intimate contact of the remaining granules and newly formed bone; and the cavities filled with calcium phosphate cement (BoneSource) were generally filled by connective fibrous tissue, and the material was almost totally resorbed. Discussion: the autogenous bone, FillerBone, and PerioGlas provided results similar to those in the current literature, showing that autogenous bone is the best Choice for filling critical-size defects. Synthetic implanted materials demonstrated biocompatibility, but the bioglasses demonstrated osteoconductive activity that did not occur with calcium phosphate (BoneSource). Conclusion: According to the methodology used in this study, it can be concluded that the utilization of autogenous bone and bioactive glasses permitted the repair of surgically created critical-size defects by newly formed bone; the synthetic implanted materials demonstrated biocompatibility, and the bioactive glasses demonstrated osteoconductive activity. The PerioGlas was mostly resorbed and replaced by bone and the remaining granules were in close contact with bone; the FillerBone showed many granules in contact with the newly formed bone; BoneSource did not permit repair of the critical-size defects, and the defects were generally filled by connective fibrous tissue.

Energy substrate utilization during nightly vocal activity in three species of Scinax (Anura/Hylidae)

Anuran amphibians exhibit different patterns of energy substrate utilization that correlate with the intensity of vocal and locomotor activities. Given the remarkable differences among species in breeding and feeding strategies, and the different ways energy is used in the whole animal, the suggested correlations between calling and locomotor behavior and the level of energy substrates in the muscles responsible for such activities are more complex than previously reported. We explored the relationships between calling and locomotor behavior and energy supply to trunk and hindlimb muscles, respectively, within the ecologically diverse tree-frog genus Scinax. Specifically, we measured the relative amount of carbohydrates and lipids in these two groups of muscles, and in the liver of three species of Scinax that differ in vocal and locomotor performance, and compared our results with those of two other species for which comparable data are available. We also compared the contents of lipids and carbohydrates of conspecific males collected at the beginning and after 4 h of calling activity. The stomach content to potential feeding opportunities across species was also assessed in both groups of males. Scinax hiemalis and S. rizibilis exhibit comparatively low and episodic calling during long periods of activity whereas S. crospedospilus calls at higher rates over shorter periods. Male S. hiemalis had highest levels of trunk muscle glycogen followed by those of S. rizilbilis and S. crospedospilus, respectively. There was no correlation between total lipid content in trunk muscle and calling rate among different species, suggesting that other metabolic aspects may be responsible for the energetic support for vocal activity. The levels of lipids and carbohydrates in trunk and hindlimb muscles and liver of males collected at the beginning and 4 h into the calling period were similar across species, so the extent of energetic reserves does not appear to constrain vocal or locomotor activity. Finally, we found exceptionally high levels of carbohydrates and lipids in the liver of S. rizibilis, a trait perhaps related to a long and demanding breeding period.

Patterns of shell utilization in Petrochirus diogenes (Decapoda, Anomura, Diogenidae) in the Ubatuba region, São Paulo, Brazil

The objective of this study is to investigate the patterns of shell utilization in Petrochirus diogenes in the Ubatuba region, SP, Brazil. Hermit crabs were obtained from 1993 to 1996 with the aid of a shrimp fishery boat equipped with two double-rigged trawling nets. Shells were identified and weighed, and their maximum aperture width was measured. Hermit crabs were weighed, and their shield length was recorded. A total of 634 P. diogenes specimens, occupying shells of 12 gastropod species, was obtained. The shells of Tonna galea, Zidona dufresnei and Strombus pugilis were the most frequently occupied, the first marked by its larger aperture width and lower average weight. Small hermit crabs inhabited a wide variety of gastropod shells due to their higher availability. However, the utilization of T. galea shells became predominant as the crabs attained larger sizes. Differences in weight and aperture width are known to encourage certain shell utilization patterns and may affect growth and reproduction of hermit crabs.

Food resource utilization of the skates Rioraja agassizii (Müller & Henle, 1841) and Psammobatis extenta (Garman, 1913) on the continental shelf off Ubatuba, South-eastern Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Utilization of electrochemical impedance spectroscopy for monitoring bornite (CU5FeS4) oxidation by Acidithiobacillus ferrooxidans

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelling energy utilization for laying type Pullets

Three trials were carried out to determine energy metabolized (EM) requirement model for starting and growing pullets from different strains, at five ambient temperatures and different percentage feather coverage. In Trial I, metabolizable energy requirements for maintenance (MEm) and efficiency of energy utilization were estimated using 64 birds of two different strains, Hy-Line W36 (HLW36) and Hy-Line Semi-heavy (HLSH), from 9 to 13 weeks of age. The effects of ambient temperature (12, 18, 24, 30 and 36ºC) and percentage feather coverage (0, 50 and 100%) on MEm were assessed in the second trial, using 48 birds per temperature per strain (HLSH and HLW36) from 9 to 13 weeks of age. Trial III evaluated ME requirements for weight gain (MEg) using 1,200 birds from two light strains (HLW36 and Hisex Light, HL) and two semi-heavy strains (HLSH and Hisex Semi-heavy, HSH) reared until 18 weeks of age. According to the prediction models, MEm changed as a function of temperature and feather coverage, whereas MEg changed as a function of age and bird strain. Thus, two models were developed for birds aged 1 to 6 weeks, one model for the light strain and one for the semi-heavy strain. Energy requirements (ER) were different among strains from 7 to 12 weeks, and therefore 4 models were elaborated. From 13 to 18 weeks, one single model was produced for semi-heavy birds, since ER between semi-heavy strains were not different, whereas two different models were elaborated for the light layers. MEg of light birds was higher than MEg of semi-heavy birds, independent of age.

Shell utilization pattern of the hermit crab Clibanarius vittatus (Crustacea, Anomura) in an estuary at São Vicente, State of São Paulo, Brazil

O objetivo do presente estudo foi avaliar a utilização de conchas de gastrópodes por Clibanarius vittatus (Bosc, 1802), na Praia dos Pescadores, em São Vicente (SP), Brasil. Foram realizadas amostras mensais no período de maio de 2001 a abril de 2003, na região intertidal durante a maré baixa. Todos os animais foram pesados e tiveram o comprimento de seu escudo cefalotorácico mensurados, suas conchas identificadas e medidas quanto ao comprimento (mm), abertura (mm) e peso (g). Capturamos 2.344 ermitões (644 machos, 1.594 fêmeas não-ovígeras, 45 fêmeas ovígeras e 61 em intersexo), utilizando 13 espécies de conchas de gastrópodes, das quais Stramonita haemastoma (Linnaeus, 1767), Cymatium parthenopeum (Von Salis, 1793) e Achatina fulica (Bowdich, 1822) representaram mais de 98% das conchas utilizadas. Obteve-se significativa diferença de tamanho entre os sexos, com machos e indivíduos em intersexo atingindo maior porte físico do que fêmeas. Este padrão influenciou fortemente na ocupação e utilização de conchas, principalmente em A. fulica, que foi a maior concha obtida por C. vittatus, utilizada somente por machos e indivíduos em intersexo. Cymatium parthenopeum foi a única espécie de concha em que se obtiveram elevados coeficientes de determinação para todas os parâmetros analisados. Stramonita haemastoma apresentou elevados e significativos coeficientes de determinação, indicando que esta espécie é o principal recurso de concha ocupada na Praia dos Pescadores.

Phosphorus utilization by corn as affected by green manure, nitrogen and phosphorus fertilizers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metodologia integrada para mapeamento de falhas: uma proposta de utilização conjunta do mapeamento de processos com as técnicas FTA, FMEA e a análise crítica de especialistas

As falhas representam não conformidades nas atividades produtivas, de tal modo que pesquisas para seu controle e prevenção são, no mínimo, desejáveis. Na literatura sobre o assunto, observa-se uma gama variada de técnicas, porém, quase sempre, usadas isoladamente e, em poucos casos, no setor de serviços. Observando essa lacuna, propõe-se uma metodologia de Mapeamento de Falhas que integra diferentes abordagens que se complementam, aproveitando-se o potencial e o benefício de cada técnica para análise e controle de falhas. Para a consecução dessa proposta, efetuou-se uma pesquisa bibliográfica para conceituação e entendimento das técnicas utilizadas, um estudo e análise de integração dessas técnicas e, por fim, um exemplo real de aplicação em processo notarial de serviço, tema este ainda não explorado na literatura pertinente e, portanto, bastante auspicioso. Como resultado, observa-se uma ferramenta que permite uma visualização completa e objetiva das atividades desencadeadas pelos processos, seus pontos críticos e suas potenciais falhas, podendo ser aplicada com propriedade em empresas de prestação de serviços.