38 resultados para Direct timeintegration methods

em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Cold-formed steel members are subject to failure caused by buckling, normally under loads smaller than those corresponding to partial or total yielding of the cross section. The buckling of members in bending can be classified as local or global, and the occurrence of one or the other type is expected by the members' geometric characteristics and by the constraints and load conditions. One of the local instability modes that can characterize a member's failure is distortional buckling of the cross section occurring on its own plane and involving lateral displacements and rotations. This paper presents and discusses the procedures and results obtained from experimental tests of cold-formed steel members under bending. Forty-eight beams were carried out on members in simple lipped channel, in pairs, with 6-meter spans and loads applied by concentrated forces at every 1/3 of the span. The thickness, width and dimensions, of the stiffeners were chosen so that the instability by distortion buckling of the cross section was the principal failure mode expected. The experimental results are compared with the obtained results by using the direct strength method.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

In this study we evaluated the frequency of enteroparasites in pet dogs and their association with age, sex and breed, as well as the efficiency of the Willis-Mollay, Faust, Sedimentation and Direct exam methods. By these methods we processed 401 fecal samples. The samples were positive in the following percentages: Ancylostoma spp. (53.1%), Toxocara canis (20.7%), Cystoisospora ohioensis (15.7%), Trichuris vulpis (3.7%), Dipylidium caninum (2.5%) and Taenia spp. (1.0%). Toxocara canis (67.3%) and C. ohioensis (47.3%) showed higher positivity in the puppies. The Willis-Mollay technique was more efficient in the diagnosis of Ancylostoma spp. and T. canis eggs. The Direct method was the least efficient. It was found that the majority of the cases of D. caninum were diagnosed by the Sedimentation method (8=2.0%), while for T. vulpis Willis-Mollay (12=3.0%) and Sedimentation (13=3.2%) were more efficient. In view of these results, we can recommend the association of Willis-Mollay and Sedimentation methods for the diagnosis of gastrointestinal helminths. Due to the elevated occurrence of Ancylostoma spp. and T. canis, which are involved in zoonotic diseases, it becomes necessary to apply more efficient prophylaxis of canine intestinal parasitosis at the City of Araçatuba, state of São Paulo.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

40.00% 40.00%

Publicador:

Resumo:

O losartano potássico é um agente anti-hipertensivo não peptídico, que exerce sua ação por bloqueio específico dos receptores da angiotensina II. Este trabalho propôs a validação e aplicação de métodos analíticos orientados ao controle de qualidade de losartano potássico 50 mg na forma farmacêutica cápsula, utilizando a espectrofotometria direta e derivada de primeira ordem na região do UV. Baseado nas características espectrofotométricas de losartano potássico, um sinal a 205 nm do espectro de ordem zero e um sinal a 234 nm do espectro de primeira derivada foram adequados para a quantificação. Os resultados foram usados para comparar essas duas técnicas instrumentais. O coeficiente de correlação entre as respostas e as concentrações de losartano potássico na faixa de 3,0-7,0 mg L-1 e 6,0-14,0 mg L-1 para espectrofotometria direta e derivada de primeira ordem em solução aquosa, respectivamente, foi de (r) of 0,9999 para ambos os casos. Os métodos foram aplicados para quantificação de losartano potássico em cápsulas obtidas de farmácias de manipulação locais e demonstraram ser eficientes, fáceis de aplicar e de baixo custo. Além disso, não necessitam de reagentes poluentes e requerem equipamentos economicamente viáveis.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Aiming to improve the diagnosis of canine leishmaniasis (CanL) in an endemic area of the Northwest region of São Paulo State, Brazil, the efficacy of parasitological, immunological and molecular diagnostic methods were studied. Dogs with and without clinical sips of the disease and positive for Leishmania, by direct parasite identification on lymph node smears and/or specific antibody detection by ELISA, were selected for the study. According to the clinical signs, 89 dogs attending the Veterinary Hospital of UNESP in Aracatuba (SP, Brazil) were divided into three groups: symptomatic (36%), oligosymptomatic (22%) and asymptomatic (22%). Twenty-six dogs from an area non-endemic for CanL were used as negative controls (20%). Fine-needle aspiration biopsies (FNA) of popliteal lymph nodes were collected and Diff-Quick (R)-stained for optical microscopy. Direct immumofluorescence, immunocytochemistry and parasite DNA amplification by PCR were also performed. After euthanasia, fragments of popliteal lymph nodes, spleen, bone marrow and liver were collected and processed for HE and immunohistochemistry. Parasite detection by both HE and immunohistochemistry was specifically more effective in lymph nodes, when compared with the other organs. Immunolabeling provided higher sensitivity for parasite detection in the tissues. In the symptomatic group, assay sensitivity was 75.61% for direct parasite search on Diff-Quick (R)-stained FNAs, 92.68% for direct immunofluorescence, 92.68% for immunocytochemistry and 100% for PCR; the corresponding values in the other clinical groups were: 32, 60, 76 and 96% (oligosymptomatic), and 39.13, 73.91, 100 and 95.65% (asymptomatic). Results of the control animals from the CanL non-endemic area were all negative, indicating that the methods used were 100% specific. (C) 2006 Elsevier B.V. All rights reserved.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Purpose: the purpose of this in vivo study was to compare the accuracy of primary incisor length determined by direct digital radiography (straight-line measurement and grid superimposition) and measurement of the actual tooth length. Methods. Twenty-two primary maxillary incisors that required extractions were selected from 3- to 5-year-old children. The teeth were radiographed with an intraoral sensor using the long cone technique and a sensor holder (30-cm focus-to-sensor distance). The exposure time was 03 seconds. Tooth length was estimated by using straight-line and grid measurements provided by the distance measurement feature of the Computed Dental Radiography digital dental imaging system. The actual tooth length was obtained by measuring the extracted tooth with G digital caliper. Data were analyzed statistically by Pearson's correlation coefficient and a paired t test. Results: There were statistically significant differences (P=.007) between the 2 measurement techniques and between the actual tooth lengths and grid measurements. There was no statistically significant difference (P=38) between straight-line measurements and actual tooth lengths, showing that the straight-line measurements were more accurate. Underestimation of the actual tooth length, however, occurred in 45% of the straight-line measurements and in 73% of the grid measurements. Conclusion: It is possible to determine primary tooth length in digital radiographs using onscreen measurements with 0 reasonable degree of accuracy.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Purpose: To evaluate clinically and microscopically the human pulp response when directly capped with an adhesive system or calcium hydroxide over short (9-12 days) and long (53-204 days) experimental periods. Materials and Methods: Fifty-one sound human premolars scheduled for orthodontic extraction, had their pulp horns gently exposed with a diamond point. Debris in the pulp wound was washed out with a sterile saline solution. The pulps were then capped with either an adhesive system (Scotchbond Multi-Purpose Plus) or calcium hydroxide. All teeth were subsequently restored with resin-based composite (Z-100) according to the manufacturer's instructions. After the experimental periods, the teeth were extracted and processed for light microscopic examination. Results: Short-term: the pulp tissue capped with SBMP-P exhibited dilated and congested blood vessels associated with a mo;derate inflammatory response and blanching of pulp cell nuclei. Long-term: no evidence of healing and bridge formation was observed. A persistent mild inflammatory pulp response was present. Micro-abscesses were detected in three cases associated with bacterial infiltration. Calcium hydroxide stimulated early pulp repair and dentin bridging which extended into the longest period.