On the temperature stability of extracellular hemoglobin of Glossoscolex paulistus, at different oxidation states: SAXS and DLS studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Superação de dormência das sementese controle químico de plantas de Momordicacharantia L

This experiment were performed to evaluate methods of seeds scarification for overcoming dormancy and the efficacy of six herbicides registered for sugarcane to control adult plants of Mcharantia. The experimental design was completely randomized, with four replications in both trials. The first trial is a factorial 2x8 (two times of seeds collection (2006 and 2007) with eight methods of breaking dormancy (mechanical scarification; 100% and 50% concentrated sulfuric acid; 2% potassium nitrate for three and six hours; heat dried at 60 degrees C; hot water at 60 degrees C and an untreated control). In the second trial evaluated the control of M. charantia through six different herbicides: Imazapic, Metsulfuron-methyl, Metribuzin, 2,4-D, Amicarbazone, Paraquat and a control without herbicide application. Thus, it can be concluded that the seeds were immersed in concentrated sulfuric acid for three minutes and potassium nitrate for three hours gave a higher percentage and germination speed and the herbicide Metribuzin reached, albeit belatedly, a total control of M. charantia.

Rupture of the cranial cruciate ligament associated with deformity of the proximal tibia in five dogs

Excessive mechanical stress due to caudal sloping of the tibial plateau may result In early breakdown of the cranial cruciate ligament (CrCL). Five dogs with CrCL rupture associated with caudal sloping of the proximal tibial plateau are described. All were small dogs, of between three and six years of age, with a mean bodyweight of 9.3 kg, which had acute hindlimb lameness. Radiographic examination revealed cranial displacement of the tibia, with a tibial angle varying from 58 to 60 degrees. All cases were treated with a lateral fabellotibial suture and cranial cuneiform osteotomy of the proximal tibia. All dogs were using the operated limb three days after surgery, with normal gait re-established after a mean period of 10 days. Excessive tibial plateau sloping is not a frequent cause of hindlimb lameness In small animals, although it Is Important to consider it as a predisposing factor for rupture of the CrCL.

Production of fibrolytic enzymes by Aspergillus japonicus C03 using agro-industrial residues with potential application as additives in animal feed

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição química e digestibilidade da vagem de algarobeira (prosopis juliflora, (sw) dc) submetida a diferentes tratamentos térmicos

The ground pods of mesquite (GPM) was submitted to different thermal treatments for two hours after wanted temperature stabilization, for making of the treatments: A = ground pods of mesquite without heat treatment (approximately 30 degrees C); B = The ground pods of mesquite treated at 60 degrees C; C = The ground pods of mesquite treated at 80 degrees C; D = The ground pods of mesquite treated at 100 degrees C and E = The ground pods of mesquite treated at 120 degrees C. Soon after, samples were collected for accomplishment for chemical analyses and in vitro digestibility. A completely randomized design with three replications was utilized. The DM, CP, NFE, CF, ADF, celluloses, lignin, ash and CE values, did not were affected (P>0.05) by temperature. It was observed a quadratic effect (P<0.01) on the contents of EE, decreasing linear effect (P<0.01) on the CC and increasing linear effect on the NDF (P<0.01) and Hemicellulose (P<0.05) contents. The in vitro dry matter digestibility and the in vitro organic matter digestibility were not affected (P>0.05) by temperature. on the other hand the in vitro protein digestibility level, showed a quadratic effect (P<0.05), decreasing after 54 degrees C.

Eficácia do teste de acidez graxa na avaliação da qualidade do café Arábica (Coffea arabica L.) submetido a diferente períodos e temperaturas de secagem

This work had the aim of evaluating the effect of different temperatures and pre-drying periods on yard on the chemical composition and quality of the beverage of peeled cherry coffee. Temperatures of 40 degrees C, 50 degrees C and 60 degrees C were used in the mass with air flow of 20m(3)m(-1)m(2). After drying, the visible defects of the coffee samples were removed. For evaluation of quality, the following analyses were performed: sensorial analyses, total sugars, reducing sugars and non-reducing sugars, electrical conductivity, potassium leaching and fatty acidity. One verified that lower drying temperature and greater pre-drying period had contributed for the attainment of a better quality drink. The increase of temperature and pre-drying periods decreased the non-reducing sugars content while the values of reducing sugars increased. The electrical conductivity, potassium leaching and fatty acidity increased significantly with the rise of temperature and potassium leaching reduced with increasing of the pre-drying period. The fatty acidity test showed to be sensible to the drying temperature.

Anisotropy of track revelation in epidote: Results of a step etching experiment with Kr-86 ion tracks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ultrastructural analysis of the low level laser therapy effects on the lesioned anterior tibial muscle in the Gerbil

Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are Still lacking. In this Study the effects of two laser dosages, 5 or 10 J/cm(2), on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/Cm(2) and GIII (n = 5), lesion irradiated with 10 J/cm(2), and treated for 7 consecutive days with a laser He-Ne (lambda = 633 rim). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 degrees C. Ultrafine Cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered Muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with Underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular Substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. it was concluded that laser dosages of 5 or 10 J/cm(2) delivered by laser He-Ne (lambda = 633 rim) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy tinder these experimental conditions. (C) 2009 Elsevier Ltd. All rights reserved.

Influência do tipo de chanfro, tecimento e sentido de laminação na distorção angular em soldagem GMAW-P robotizada de alumínio

The industry's interest in having a greater control of the deformations caused by welding is due to the geometric and dimensional tolerances been more and more precise in the project specifications, motivating the manufacturing engineering to develop stable processes and to ensure routine production. Aiming at it, the main goal of this present work is to analyze how much routine situations used in automatic aluminum welding can influence on the angular deformations of this material. Using the alloy AA 5052 H34, and the automatic welding in pulsed GMAW process, three types of weaving were applied throughout the length of the weld, in butt joints assembled without groove and with 60 degrees single-V-groove, arranged transversely as well as longitudinally to the rolling direction of the plate. The measurement of the deformations was made by a three-dimensional equipment, before and after the welding, in three distinct regions in the specimens. The profile of the weld bead was the main factor for the different types of deformations found, as revealed by macrographical analysis. The 60 degrees single-V-groove had higher amplitudes of deformations as the joint without groove. The torch oscillation wasn't a variable of statistically significant influence on this amplitudes.

Thermal and mechanical behaviour of sisal/phenolic composites

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determining the Optimum Processing Parameters of Glass-like Carbon Using Weibull Analysis of its Fracture Behaviour

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of cassava starch content and sintering temperature on the alumina consolidation technique

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Spermatozoon ultrastructure and sperm cryopreservation of the Brazilian dry season spawner fish pirapitinga, Brycon nattereri

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

LMI-based algorithm for strictly positive real systems with static output feedback

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A model to predict R134a refrigerant leakage through the radial clearance of rolling piston compressors

In this paper a non-isothermal two-phase model for oil-R134a refrigerant mixture flow is presented to predict the R134a leakage through the radial clearance of rolling piston compressors. The flow is divided in a liquid single-phase region and in a two-phase region, in which the homogeneous model is used to simulate the flow. The refrigerant leakage is determined using the mixture mass flow rate and the refrigerant mass fraction variation along the flow. The results are obtained for inlet pressures varying from 200 to 700 kPa, inlet temperatures ranging from 40 to 60 degrees C, and minimal clearances between 10 and 60 mu m. The results are firstly compared to existing isothermal model data, showing that there is a significant difference between the leakage flow rates predicted by isothermal and non-isothermal models. Finally, a useful general equation for compressor designers is proposed to calculate the refrigerant leakage for a large range of operation conditions. (C) 2012 Elsevier Ltd and IIR. All rights reserved.