15 resultados para 4x100 M Relay

em Repositório Institucional UNESP - Universidade Estadual Paulista "Julio de Mesquita Filho"


Relevância:

20.00% 20.00%

Publicador:

Resumo:

An adaptive scheme is shown by the authors of the above paper (ibid. vol. 71, no. 2, pp. 275-276, Feb. 1983) for continuous time model reference adaptive systems (MRAS), where relays replace the usual multipliers in the existing MRAS. The commenter shows an error in the analysis of the hyperstability of the scheme, such that the validity of this configuration becomes an open question.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

O cultivo da soja fora da época convencional pode ser uma alternativa de rotação de cultura além de proporcionar sementes de melhor qualidade fisiológica, que podem ser utilizadas na semeadura da próxima safra diminuindo o período de armazenamento. O trabalho de pesquisa teve por objetivo avaliar o comportamento de sete cultivares de soja, em três densidades populacionais, quanto ao porte e altura de inserção da primeira vagem, assim como quanto à produção e qualidade fisiológica das sementes, semeadas no período de inverno, na região de Selvíria-MS. O delineamento experimental foi em blocos casualizados, com quatro repetições, dispostos em esquema fatorial 7 ×3. Os tratamentos constaram de sete cultivares (IAC-16, IAC-Foscarin 31, FT-2, IAC-17, IAC-8, Doko e FT-Cristalina) e três densidades de plantas (300, 400 e 500 mil plantas ha-1). O ciclo da soja foi reduzido no cultivo de inverno, principalmente nos cultivares considerados tardios. O fotoperíodo no cultivo de inverno reduziu o período entre o florescimento e a maturação. O cultivar IAC-8 foi o menos sensível ao fotoperíodo, possuindo maturação em época semelhante aos cultivares tardios, e apresentou as melhores características agronômicas para o cultivo no período de inverno. É aconselhável o aumento de densidade de semeadura quando do uso de cultivares precoces em cultivos de inverno. Não é aconselhável armazenar sementes em condições ambientes, principalmente com valores de germinação próximo ao limite inferior desejável (80%).

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Orofacial movement is a complex function performed by facial and jaw muscles. Jaw movement is enacted through the triggering of motoneurons located primarily in the trigeminal motor nucleus (Mo5). The Mo5 is located in the pontine reticular formation, which is encircled by premotor neurons. Previous studies using retrograde tracers have demonstrated that premotor neurons innervating the Mo5 are distributed in brainstem areas, and electrophysiological studies have suggested the existence of a subcortical relay in the corticofugal-Mo5 pathway. Various neurotransmitters have been implicated in oral movement. Dopamine is of special interest since its imbalance may produce changes in basal ganglia activity, which generates abnormal movements, including jaw motor dysfunction, as in oral dyskinesia and possibly in bruxism. However, the anatomical pathways connecting the dopaminergic systems with Mo5 motoneurons have not been studied systematically. After injecting retrograde tracer fluorogold into the Mo5, we observed retrograde-labeled neurons in brainstem areas and in a few forebrain nuclei, such as the central nucleus of the amygdala, and the parasubthalamic nucleus. By using dual-labeled immunohistochemistry, we found tyrosine hydroxylase (a catecholamine-processing enzyme) immunoreactive fibers in close apposition to retrograde-labeled neurons in brainstem nuclei, in the central nucleus of the amygdala and the parasubthalamic nucleus, suggesting the occurrence of synaptic contacts. Therefore, we suggested that catecholamines may regulate oralfacial movements through the premotor brainstem nuclei, which are related to masticatory control, and forebrain areas related to autonomic and stress responses. (C) 2005 Elsevier B.V.. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this paper, a methodology based on Unconstrained Binary Programming (UBP) model and Genetic Algorithms (GAs) is proposed for estimating fault sections in automated distribution substations. The UBP model, established by using the parsimonious set covering theory, looks for the match between the relays' protective alarms informed by the SCADA system and their expected states. The GA is developed to minimize the UBP model and estimate the fault sections in a swift and reliable manner. The proposed methodology is tested by utilizing a real-life automated distribution substation. Control parameters of the GA are tuned to achieve maximum computational efficiency and reduction of processing time. Results show the potential and efficiency of the methodology for estimating fault section in real-time at Distribution Control Centers. ©2009 IEEE.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper presents an interactive simulation environment for distance protection, developed with ATP and foreign models based on ANSI C. Files in COMTRADE format are possible to generate after ATP simulation. These files can be used to calibrate real relays. Also, the performance of relay algorithms with real oscillography events is possible to assess by using the ATP option for POSTPROCESS PLOT FILE (PPF). The main purpose of the work is to develop a tool to allow the analysis of diverse fault cases and to perform coordination studies, as well as, to allow the analysis of the relay's performance in the face of a real event. © 2011 IEEE.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Brazilian Campos grasslands are ecosystems under high frequency of disturbance by grazing and fires. Absence of such disturbances may lead to shrub encroachment and loss of plant diversity. Vegetation regeneration after disturbance in these grasslands occurs mostly by resprouting from belowground structures. We analyzed the importance of bud bank and belowground bud bearing organs in Campos grasslands. We hypothesize that the longer the intervals between disturbances are, the smaller the size of the bud bank is. Additionally, diversity and frequency of belowground organs should also decrease in areas without disturbance for many years. We sampled 20 soil cores from areas under different types of disturbance: grazed, exclusion from disturbance for two, six, 15 and 30 years. Belowground biomass was sorted for different growth forms and types of bud bearing organs. We found a decrease in bud bank size with longer disturbance intervals. Forbs showed the most drastic decrease in bud bank size in the absence of disturbance, which indicates that they are very sensitive to changes in disturbance regimes. Xylopodia (woody gemmiferous belowground organs with hypocotyl-root origin) were typical for areas under influence of recurrent fires. The diversity of belowground bud bearing structures decreased in the absence of disturbance. Longer intervals between disturbance events, resulting in decrease of bud bank size and heterogeneity of belowground organs may lead to the decline and even disappearance of species that relay on resprouting from the bud bank upon disturbance. (C) 2014 Elsevier GmbH. All rights reserved.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Large electric motors require greater care when driving, especially during continuous operation since they are part of day-to-day manufacturing sector, acting essentially to ensure that no damage occurs to the production process and equipment that are part of the same system. This work includes the analysis of electrical protection in a system comprised of a three phase induction motor driven by a frequency converter as well as an analysis of the functions of a multifunction electronic relay. It is presented a comparison between the existing functions in a converter and a relay and a real case is described in order to exemplify the use of an electric motor and features that are aimed at their protection, and the system in which it is inserted. Based on the results, it is of great importance in this field of performance studies, generating relevant results, which may be exposed in order to unify into a single document, different sources of information that are arranged randomly, improve utilization motor and extend the life of equipment forming part of the electrical installation

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)