151 resultados para data treatment
Resumo:
Aims: To compare the effectiveness of adding cyclobenzaprine, tizanidine, or placebo to patient education and a self-care management program for patients with myofascial pain and specifically presenting with jaw pain upon awakening. Methods: Forty-five patients with a diagnosis of myofascial pain based on the guidelines of the American Academy of Orofacial Pain participated in this 3-week study. The subjects were randomly assigned into one of three groups: placebo group, TZA group (tizanidine 4 mg), or CYC group (cyclobenzaprine 10 mg). Patients were evaluated for changes in pain intensity, frequency, and duration by using the modified Severity Symptoms Index and changes in sleep quality with the use of the Pittsburgh Sleep Quality Index. Data were analyzed by ANOVA and post-hoc or nonparametric statistical tests as appropriate. Results: All three groups had a reduction in pain symptoms and improvement of sleep quality based on a comparison of pretreatment and treatment scores. However, no significant differences among the groups were observed at the posttreatment evaluation. Conclusion: The use of tizanidine or cyclobenzaprine in addition to self-care management and patient education was not more effective than placebo for the management of patients with myofascial jaw pain upon awakening.
Resumo:
Purpose: To evaluate the influence of heat treatment (HT) procedures of a pre-hydrolyzed silane on bond strength of resin cement to a feldspathic ceramic.Materials and Methods: Ceramic and composite blocks (N = 30) were divided into six groups (n = 5) and subjected to the following conditioning procedures: G1: 9.6% hydrofluoric acid (HF) for 20 s + silane (RelyX Ceramic Primer, 3M ESPE) + resin cement (Panavia F2.0, Kuraray) (control); G2: HF (20 s) + silane + heat treatment in furnace (HTF) (100 degrees C, 2 min) + resin cement; G3: silane + HTF + resin cement; G4-HF (20 s) + silane + heat treatment with hot air (HTA) (50 +/- 5 degrees C for 1 min) + resin cement; G5: silane + HTA + resin cement; G6: silane + resin cement. The microtensile bond strength (MTBS) test was performed using a universal testing machine (1 mm/min). After debonding, the substrate and adherent surfaces were analyzed using a stereomicroscope and SEM to categorize the failure types. The data were statistically evaluated using one-way ANOVA and Tukey's test (5%).Results: The control group (G1) showed no pre-test failures and presented significantly higher mean MTBS (16.01 +/- 1.12 MPa) than did other groups (2.63 +/- 1.05 to 12.55 +/- 1.52 MPa) (p = 0.0001). In the groups where HF was not used, HTF (G3: 12.55 +/- 1.52 MPa) showed significantly higher MTBS than did HTA (G5: 2.63 +/- 1.05 MPa) (p < 0.05). All failure types were mixed, ie, adhesive between the resin cement and ceramic accompanied by cohesive failure in the cement.Conclusion: Heat treatment procedures for the pre-hydrolyzed silane either in a furnace or with the application of hot air cannot replace the use of HF gel for the adhesion of resin cement to feldspathic ceramic. Yet when mean bond strengths and incidence of pre-test failures are considered, furnace heat treatment delivered the second best results after the control group, being considerably better than hot air application.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The conservation of raw milk for long periods of time under refrigeration can result in the lost of its quality. This happens because bacterias, capable of developing in low temperatures, as psichrotrophics, in milk, associates with its enzymatic activities, are capable to degradate it. Although the pasteurization of milk sufficiently diminishes the transmission of the illnesses, that generally eliminates such microorganisms, is not a total efficient process because many enzymes produced for such bacterias are termostable, being able to resist the treatment and to remain active, leading to the loss of the quality of milk and its derivatives. The Normative Instruction 51 of 2002 established that milk must be cooled and stored in the production property, what resulted increasing the incidence of such bacteria in population destined milk. In some parts of the world contaminated milk is causing serious risks to the health of the population, assuming great importance in Public Health, mainly in relation to the hygienic-sanitary conditions of the product. ANVISA establishes, thus, maximum bacteriological concentration that must be evidenced before commercializing the product, guaranteeing the quality of milk as proper for consumption. Based on these aspects, the objective of this work is the microbiological analysis of 30 milk samples type C, collected in bakeries of the city Botucatu, in the state of São Paulo. Analysis were made to determinate the most likely number of termotolerants coliforms, as well the number of colony units of psichrotrophics bacterias, the presence of Salmonella and the enumeration of positive Staphylococcus aureus, at the moment of purchase and validity of the products
Resumo:
Nanotherapy applied to cancer treatment is constantly evolving, and new approaches to current techniques, such as magnetohyperthermia, are being implemented to solve and minimize the limitations of conventional therapeutic strategies. The purpose of this study was to investigate the action of polyphosphate-coated maghemite nanoparticles (MNPs) on oral squamous cell carcinoma. Human oral cancer cells (UM-SCC14A) were incubated with MNPs at various concentrations and subjected to cell proliferation tests (MTT), apoptosis assays and transmission electron image analysis. Viability and apoptotic events were time and dose dependent. These in vitro tests showed that at the intermediate concentration tested there is no significant toxicity, as confirmed by transmission electron microscopy. For this reason this MNPs concentration was chosen for the subsequent in vivo tests. Oral tumor induction was performed by applying the carcinogen DMBA to Syrian hamsters. Animals were then treated by magnetohyperthermia using MNPs. No signs of general clinical symptoms of toxicity or abnormal behavioral reactions were observed. However, animals treated with MNPs and exposed to the alternating magnetic field in the hyperthermia procedure exhibited a significant and time dependent cancer regression, as confirmed by histopathological analyses and immunohistochemistry. Actually, in quantitative terms of the magnetotherapy efficacy involving these polyphosphate-coated MNPs, 100% recovery (12/12) was observed in the oral cancer tumor bearing Syrian hamsters seven days after the treatment with the magnetohyperthermia procedure. Data supports the suggestion that the MNPs-mediated hyperthermia represents a promising strategy for the treatment of oral cancer.
Resumo:
Objective: To evaluate if the total bacterial count of vaginal samples with bacterial vaginosis assessed by flow cytometry influences the response to treatment with metronidazol. Methods: In this cross-sectional study, 273 low-risk reproductive aged women were enrolled. Vaginal samples were taken to evaluate the pattern of vaginal flora according to Nugent’s criteria, as well as the presence of trichomoniasis and candidosis. Cases identified of bacterial vaginosis were treated with metronidazole and controlled after 45 days. Cervical infection by Chlamydia trachomatis and Neisseria gonorrhoeae were also assessed. Flow cytometry for total bacterial counting was performed in propidium iodide stained cervicovaginal samples, using fluorescent beads at a known concentration. Non-parametric Mann-Whitney test was used to compare total bacterial count between groups of interest, at p<0.05. Results: From the total of 273 women enrolled, 50 were excluded as they presented at least one of the infections investigated. Bacterial vaginosis was detected in 79 women (35.4%), of which 33 (41.8%) returned for re-evaluation after treatment, being 21 cases successfully treated and 12 with persistent abnormal vaginal flora. Flow cytometric data showed that total bacterial counting does not differ between normal flora and bacterial vaginosis samples (p=0.14). Also, no difference was found between the cases of treated and persistent bacterial vaginosis (p=0.48). Conclusion: Total bacterial counting does not influence the response to metronidazole treatment of bacterial vaginosis
Resumo:
The aim of the present study was to analyze the etiology, type and treatment employed in the orbito-zygomatic fractures (OZ). Also, postoperative complications are described and correlated with the type of treatment used. Fifty patients with OZ fractures were evaluated. Orbital fractures in which the zygomatic bone was not involved were excluded. Epidemiologic data and characteristics of treatment such as the type of material used for osteosynthesis, number of anatomical sites on which rigid internal fixation (RIF) was applied, surgical approaches and associated complications were recorded. The main causes of trauma were motorcycle and bicycle accidents, constituting 52% of the sample. The osteosynthesis system used was the 2.0 mm, except in four patients in whom the 1.5mm system was used for fixation at the infra-orbital rim. A total of 18% of the patients required reconstruction of the internal orbit and in all cases titanium mesh was used. 46% of the patients received RIF in three anatomical sites, most in the fronto-zygomatic suture, infra-orbital rim and zygomatic-maxillary buttress. The most frequent complication was paresthesia of the infra-orbital nerve (34 patients, 68%). Other findings were also discussed with the intent of better understanding the treatment of the OZ fractures.
Resumo:
The surface of dental implants is an important factor for osseointegration process and different methods of surface treatment have been described. Objective: To investigate the bone apposition in implant surface treated with sandblasting and acid-etching. Material and methods: Ten rabbits were selected and received one implant treated with method I in the left tibia and one implant treated with method II in the right tibia. Then, twenty implants were divided in two groups, according to methods of sandblasting and acid-etching (method I and method II). After 7, 14, 30, 45 and 60 days, tibias were retrieved and submitted to histotechnical procedures. The percentages of bone–implant contact (BIC) and bone area between threads (BABT) were determined throughout histomorphometric analysis and bone apposition was detected in implants of both groups. Results: In BABT measurements, an increase was observed after 45 and 60 days in the method II, compared to method I and no differences were found after 7, 14 and 30 days. In BIC measurements, an increase was detected with method II at 45 days when compared to method I. No differences between groups in BIC values were observed after 7, 14, 30 and 60 days. Conclusion: Our data demonstrated that implants treated with the method II presented increase in the contact between bone and implant after 45 days compared to method I. Moreover, with concern to bone area between threads, it was observed an increased in the method II after 45 and 60 days. However, both groups can be successfully used as a therapeutic strategy to rehabilitation of edentulous patients. Then, further experiments are needed to evaluate, in depth, the putative differential role of each surface treatment.