Influência da acidez da suspensão coloidal para a geração de defeitos pontuais e emissão no infra vermelho em SnO2 dopado com Er

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Amostragem de sólidos em espectrometria de absorção atômica de fonte contínua com alta resolução: análise de plantas medicinais

Pós-graduação em Química - IQ

Doses de lodo de esgoto compostado em produção de tapete de grama esmeralda imperial

The efficiency of nitrogen fertilization for sod production can be increased by using slow-release sources such as sewage sludge compost, which, due to its characteristics can be a substitute of part or all inorganic fertilization for grass. No results were found for the use of sludge compost in sod production in Brazil. This study evaluated the effect of rates of sewage sludge compost on the production of zoysiagrass. Treatments consisted of five rates of composted sewage sludge compost (0, 12, 24, 36 and 48 Mg ha-1, on a dry basis), plus a treatment of inorganic fertilization (300 kg ha-1 N, 80 kg ha-1 P2O5, and 200 kg ha-1 K2O). The results indicated different mineralization rates of the organic compounds present in the sludge; 120 days after sludge application, more Mg (100 %), K (90 %) and N (67 %) has been released than S (57 %), P (40 %) and Ca (31 %). The use of composted sewage sludge for zoysiagrass adequately supplied nutrients when applied to the soil surface at rates more than 36 Mg ha-1. After sod cutting, the rates of sewage sludge compost provided a linear increase in potential soil acidity, soil contents of OM, P, S, Fe, Cu, Mn, Zn, Cu and Ni, and linear decrease in pH, soil concentration of Ca and Mg and base saturation. Compost rates, increasing from 0 to 48 Mg ha-1, reduced the sod mass, reaching values of 4.0 kg/sod at the highest rate. High compost doses (36 and 48 Mg ha-1, respectively) also induced the highest resistance, with values in the order of 35 and 33 kgf.

Níquel em solo e plantas de milho cultivadas em área tratada com lodo de esgoto durante 15 anos consecutivos

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Síntese, caracterização e estudo da auto-associação em solução aquosa de derivados anfifílicos zwiteriônicos de quitosana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características químicas do solo e produção de biomassa de alface adubada com compostos orgânicos

The objective of the present study was to evaluate changes in chemical characteristics of soil and yield response of lettuce fertilized with organic compounds from waste and/or raw materials. Treatments were arranged in a randomized block design in a 5 x 4 factorial scheme, with five types and four doses of organic compounds, with four replications, applied to plants grown in pots for 35 days under greenhouse conditions. In the soil, the evaluated variables were: organic matter content, nutrient content -P, K+, Na+, Ca2+ and Mg+2, potential acidity (H+ + Al3+), sum of bases (S value), cation exchange capacity (CEC), base saturation (V%) and pH. In plants, dry matter yield of shoot was assessed. The addition of organic compounds increased the dry matter yield of the lettuce and organic matter content in soil, favoring the increase of phosphorus and exchangeable sodium in soil, also, increase in calcium and potassium were observed, with use of some compounds. Compounds 3 (domestic, urban and industrial residues) and 4 (Commercial Composto - Greenworld), mainly, improve the chemical characteristics of soil and reduce potential acidity.

Cristalização convencional de zeólitas e induzida por sementes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de composto orgânico de peixe em adubação de capim-marandu

Pós-graduação em Zootecnia - FCAV

Estudo da eficácia e citotoxicidade de filme e sistema emulsionado contendo ácido cafeico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Molecular design of new P3HT derivatives: Adjusting electronic energy levels for blends with PCBM

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Amorphous silicon carbonitride films modified by plasma immersion ion implantation

Amorphous silicon carbonitride (a-SiCN:H) films were deposited from hexamethyldisilazane (HMDSN) organic compounds via radio-frequency (RF) glow discharges. Afterwards the films were bombarded, from 15 to 60 min, with nitrogen ions using Plasma Immersion Ion Implantation (PIII) technique. X-ray photoelectron spectroscopy (XPS) showed that O-containing groups increased, while C-C and/or C-H groups decreased with treatment time. This result indicates chemical alterations of the polymeric films with the introduction of polar groups on the surface, which changes the surface wettability. In fact, the hydrophobic nature of a-SiCN:H films (contact angle of 100 degrees) was changed by nitrogen ion implantation and, and after aging in atmosphere air, all samples preserved the hydrophilic character (contact angle <80 degrees) independently of treatment time. The exposure of the films to oxygen plasma was performed to evaluate the etching rate, which dropped from 24% to 6% while the implantation time increased from 15 to 60 min. This data suggests that Pill increased the film structure strength, probably due to crosslinking enhancement of polymeric chains. Therefore, the treatment with nitrogen ions via Pill process was effective to modify the wettability and oxidation resistance of a-SiCN:H films. (C) 2014 Elsevier Ltd. All rights reserved.

Micro-fungos de interesse para o setor de petróleo, gás e biocombustíveis

Oil is a hydrocarbon mixture of various sizes, including saturated and aromatic compounds. Natural gas is a mixture of gaseous hydrocarbons and its main component is methane. In our society, the great demand for these fuels requires fast extraction, transportation and refining, increasing the number of accidents that compromise the environment. Oil is a finite resource and it is necessary to reduce the problems related to the question concerning environmental pollution which has encouraged the search for alternative fuel sources in our country. So today we have two major biofuels: ethanol and biodiesel. Concurrently, many studies have been done directed toward the isolation of microorganisms capable of degrading petrochemical industrial wastes, most of them using as a source of isolation soil and water collected in a contaminated environment. Isolation from alternative substrates has emerged as a new strategy that has provided satisfactory results. In this work, we present the leaf-cutter ants of the Attini tribe as a source for the isolation of micro-fungi with the potential for hydrocarbon degradation. These insects have a social way of life and a highly specialized system of intra and interspecific communication, which is based on the recognition of individuals through volatile chemical compounds, the majority hydrocarbons, stored in their exoskeleton. The micro-environment exoskeleton of Attini ants (genus Atta) used in this work proved to be a rich source of microbial biodiversity, as other studies have found. The flotation isolation technique applied here allowed the achievement of 214 micro-fungi, 118 representatives of the dematiaceous fungi group and 96 hyaline filamentous fungi. They were submitted to toluene degradation tests and at least one strain of each genus presented good results, namely Teratosphaeria, Exophiala, Cladosporium, Penicillium, Aspergillus... (Complete abstract click electronic access below)

Estudo, construção e caracterização de diodos orgânicos tipo Schttky

During the twentieth century the inorganic electronics was largely developed being present in various industrial equipment or household use. However, at the end of that century were verified electronic properties in organic compounds, giving rise to the field of organic electronics. Since then, the physical properties of elementary devices such as diodes and organic transistors have been studied. In this work was studied the properties of diode devices fabricated with a semiconductor polymer, the poly-o-methoxyaniline (POMA). Devices containing electrodes of Au and Al were fabricated with semiconductor polymer of different doping levels. We found that the rectifying behavior for the heterojunctions metal/polimer are reached only for high doping level (with conductivity greater than 1,77. 10-9 S / cm), which gives the devices characteristic of a Schottky diode. The rectifying behavior was observed for electric fields of low magnitude, below the operating field (~ 600 V/cm), while for electric field greater than 600 V/cm the a linear behavior I vs.V was obtained. We determined that this Ohmic behavior arises from the charge transport over the volume of the semiconductor material after the lowering of the metal/semiconductor barrier. In devices with weakly doped semiconductor, the electrical resistance of the volume becomes high and the process of charge transportation is dominated by the volume, for any intensity of the applied electric field

Utilização de biossurfactante e surfactante químico para dessorção de óleo presente em vermiculita hidrofobizada: estudo comparativo

A number of methods and products have been developed in order to eliminate or reduce the negative effects that hydrocarbons cause to the environment, including hydrophobic expanded vermiculite, used in oil residue filtering systems at gas stations. However, upon adsorbing organic compounds, the vermiculite is no longer used and is sent to landfills. The aim of the present study was to wash granular and powdered vermiculite containing oil lubricant in its pores with distilled water and solutions of 0.1% SDS surfactant and rhamnolipids, with the aim of removing the lubricant and the possibility of reusing the mineral. The greatest amount of lubricant removal was obtained through washing with 0.1% SDS and both granulometric forms. This may be associated to the industrial purification received by the surfactant. However, the biosurfactant is ecologically more viable due to its low toxicity and ease of degradability. In the readsorption tests, greatest adsorption was obtained with the granular vermiculite washed in SDS solution. In order to enable the reuse of the mineral, further tests are needed to enhance desorption/adsorption efficiency.

Determinação de Cd, Cu, Ni, Pb e Zn em águas marinhas oriundas da Bacia Potiguar utilizando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

The DGT technique has been used to determine and better understand the dynamics and bioavailability of metals in the sea near to marine outfalls. In this work, the DGT was assessed for the determination of Cd, Pb, Cu, Zn and Ni in marine water samples from Potiguar Basin in its conventional aspect (binding agent, Chelex-100 and diffusive agent: Diffusive polyacrylamide gel (D) and restrictive (R)) and determination of Pb and Cd through its alternative aspect (binding agent: Saccharomyces cerevisiae immobilized in agarose gels and diffusive agent: 3MM Chromatography Paper). The deployment curves for long periods of immersion in the sample, showed a good linear correlation for the conventional aspect to Zn (D: R²=0.9586, R: R²=0.9444), Ni (D: R²=0.9789, R: R²=0.9286) and Cu (D: R²=0.764, R: R²=0.8143), and alternative to Pb (R²=0.9228) and Cd (R²=0.9673). The results of the organic and inorganic composition analysis in conventional aspect, showed that for every element there is no significant fraction of organic compounds in the sample. In addition, considering the alternative aspect, the comparison of obtained and expected masses suggests that some of the Pb is not labile and that the main retention mechanism of Pb for S. Cerevisiae occurs through ion exchange