Effect of surface and heat treatments on the biaxial flexural strength and phase transformation of a y-tzp ceramic

To evaluate the effect of grinding and airborne-particle abrasion on the biaxial flexural strength (BFS) and phase transformation of a Y-TZP ceramic, and examine whether sintering the veneering porcelain renders the previous heat treatment recommended by the manufacturer unnecessary. Materials and Methods: Lava zirconia specimens (N = 108) were obtained with the following dimensions: 14.0 mm diameter × 1.3 mm thickness (n = 36) and 14.0 mm × 1.6 mm (n = 72). The thicker specimens were ground with diamond burs under irrigation and received (heat-treated groups) or not (non-heat-treated groups) a heat treatment (1000°C for 30 min) prior to the four firing cycles applied to simulate the sintering of the veneering porcelain. All specimens were air abraded as follows (n = 12): 1) 30-μm silica-modified Al2O3 particles (Rocatec Soft); 2) 110-μm silica-modified Al2O3 particles (Rocatec Plus); and 3) 120-μm Al2O3 particles, followed by Rocatec Plus. Three specimens of each group were analyzed by x-ray diffraction (XRD) to assess the monoclinic phase content (%). The BFS test was performed in a mechanical testing machine (Instron 8874). Data (MPa) were analyzed by two-way ANOVA (grinding × airborne-particle abrasion and heat treatment × airborne-particle abrasion) and Tukey's post-hoc test (α = 0.05). The strength reliability was analyzed using the Weibull distribution. Results: Grinding significantly decreased the BFS of the non-heat-treated groups (p < 0.01). Within the ground groups, the previous heat treatment did not influence the BFS (p > 0.05). Air abrasion only influenced the BFS of the ground/heat-treated groups (p < 0.01). For the non-heat-treated groups, the grinding did not decrease the Weibull modulus (m), but it did decrease the characteristic strength (σ0). For Rocatec Soft and 120-μm Al2O3 particles + Rocatec Plus, the heat-treated groups presented lower m and higher σ0 than the ground/non-heat-treated groups. The independent variables did not seem to influence phase transformation. Air-abraded surfaces presented higher monoclinic zirconia content than the as-sintered and ground surfaces, which exhibited similar content. Conclusion: Even under irrigation, grinding compromised the Y-TZP ceramic strength. The sintering of the veneering porcelain rendered the previous heat treatment recommended by the manufacturer unnecessary. Airborneparticle abrasion influenced the strength of heat-treated zirconia.

Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic.

Statement of problem Because airborne-particle abrasion is an efficient method of improving the bond at the zirconia-cement interface, understanding its effect on the strength of yttria-stabilized tetragonal zirconia polycrystal is important. Purpose The purpose of this study was to evaluate the effect of the particle size used for airborne-particle abrasion on the flexural strength and phase transformation of a commercially available yttria-stabilized tetragonal zirconia polycrystal ceramic. Material and Methods For both flexural strength (20.0 × 4.0 × 1.2 mm) (n=14) and phase transformation (14.0-mm diameter × 1.3-mm thickness) (n=4), the zirconia specimens were made from Lava, and their surfaces were treated in the following ways: as-sintered (control); with 50-μm aluminum oxide (Al2O3) particles; with 120-μm Al2O3 particles; with 250-μm Al2O3 particles; with 30-μm silica-modified Al2O3 particles (Cojet Sand); with 120-μm Al2O3 particles, followed by 110-μm silica-modified Al2O3 particles (Rocatec Plus); and with Rocatec Plus. The phase transformation (%) was assessed by x-ray diffraction analysis. The 3-point flexural strength test was conducted in artificial saliva at 37°C in a mechanical testing machine. The data were analyzed by 1-way ANOVA and the Tukey honestly significant difference post hoc test (α=.05). Results Except for the Cojet Sand group, which exhibited statistically similar flexural strength to that of the as-sintered group and for the group abraded with 250-μm Al2O3 particles, which presented the lowest strength, airborne-particle abrasion with the other particle sizes provided the highest values, with no significant difference among them. The as-sintered specimens presented no monoclinic phase. The groups abraded with smaller particles (30 μm and 50 μm) and those treated with the larger ones (110 μm and/or 120 μm particles and 250 μm) exhibited percentages of monoclinic phase that varied from 4% to 5% and from 8.7% to 10%. Conclusions Except for abrasion with Cojet Sand, depending on the particle size, zirconia exhibited an increase or a decrease in its flexural strength. Airborne-particle abrasion promoted phase transformation (tetragonal to monoclinic), and the percentage of monoclinic phase varied according to the particle size.

Backlund transformation for integrable hierarchies: example - mKdV hierarchy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Type-II super-Backlund transformation and integrable defects for the N=1 super sinh-Gordon model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Photoluminescence of BaZrO3 explained by a order/disorded transformation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Application of Micro-Raman Spectroscopy to the Study of Yttria-Stabilized Tetragonal Zirconia Polycrystal (Y-TZP) Phase Transformation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prognostic value of vascular endothelial growth factor and hypoxia-inducible factor 1 alpha in canine malignant mammary tumors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Malignant syphilis in an immunocompetent female patient

Malignant syphilis is an uncommon manifestation of secondary syphilis, in which necrotic lesions may be associated with systemic signs and symptoms. Generally it occurs in an immunosuppressed patient, mainly HIV-infected, but might be observed on those who have normal immune response. Since there is an exponential increase in the number of syphilis cases, more diagnoses of malignant syphilis must be expected. We report a case in an immunocompetent female patient.

Does radioiodine therapy in patients with differentiated thyroid cancer increase the frequency of another malignant neoplasm?

Objectives. To compare the frequency of another primary malignancy in patients with differentiated thyroid carcinoma (DTC) who received radioiodine therapy or not ((131)I). Material and Methods. 168 cases of DTC patients were retrospectively evaluated as to the frequency of another neoplasia by comparing patients with and without it, taking into account clinical, laboratory, and therapeutic parameters. Results. Another primary malignancy occurred in 8.9% of patients. Of these, 53.3% showed the malignancy before (131)I and 46.7% after it. By comparing both groups, the age at the moment of diagnosis of another neoplasia was 46.1 ± 20.2 years for the group before (131)I therapy and of 69.4 ± 11.4 years for the group after it (P = 0.02). Of the 148 patients treated with (131)I, 4.7% developed another malignancy. The latter were older (61 ± 17 years) than those who did not show another cancer type (44.1 ± 14.2 years) (P < 0.05). Conclusion. The frequency of another neoplasia found after (131)I was similar to that found before (131)I.

Evaluation of prognostic factors and survival rates in malignant feline mammary gland neoplasms

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physico-chemical characterization and analytical development for sodium azumolene, a potential drug designed to fight malignant hyperthermia

Sodium azumolene is a drug designed to fight Malignant Hyperthermia (MH), which is characterized by genetic predisposition and triggered by the use of inhalational anesthetics. This drug is shown as a water-soluble analogue of dantrolene sodium, 30-folds more water soluble, which gives advantages for its emergency use. To our knowledge there is no analytical method for sodium zaumolene raw material or dosage form published so far. The objective of the present investigation was to develop and validate analytical methods to achieve sodium azumolene chemical identification and quantification. The sodium azumolene was characterized regarding its thermal behavior, by differential thermal analysis and thermogravimetric analysis; Visible, UV and infrared absorption. To accurately assess the sodium Azumolene content three different analytical methods (visible and UV spectrophotometry and high performance liquid chromatography) were developed and validated. All methods showed to be linear, accurate, precise and reliable. Azumolene has shown to be equipotent to dantrolene in the treatment and prevention of an MH crisis and the great advantage compared to dantrolene is better water solubility. This study has characterized the sodium azumolene and presents new analytical methods which have not been reported so far.

Malignant epitheliod hemangioendothelioma of the thyroid: a case report

Primary malignant epithelioid hemangioendothelioma (MEH) of the thyroid is a rare neoplasia with only a few cases reported in the literature. We report a 75 year old man, who presented with a substernal goiter and compressive symptoms. Ultrasonographic evaluation revealed a hypoechogenic nodule in the left lobe, measuring 4.1 cm in maximum diameter, and associated gross calcifications. Fine needle aspiration yielded hemorrhagic material. A left thyroid lobectomy and isthmusectomy was performed. The surgical specimen contained a malignant epithelioid hemangioendothelioma measuring 6 x 4 x 3 cm that had infiltrated about 50% of the thyroidal parenchyma, and surrounded a necrotic nodule. Immunohistochemistry results corroborated the histopathological findings; staining was positive for AE1/AE3, CD31, CD34, factor VIII-related antigen, and Ki-67 expression. Because of the patient’s comorbidities, surgical complementation was not undertaken and he has been undergoing conservative treatment.