Iron chelating-mediated antioxidant activity of Plectranthus barbatus extract on mitochondria

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação espectrofotométrica de citrato de sildenafil em formulações farmacêuticas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Strontium zirconate heterogeneous catalyst for biodiesel production: Synthesis, characterization and catalytic activity evaluation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relações solo-paisagem em topossequência de origem basáltica

Variações nos atributos do solo dependem da posição do solo na paisagem e processos de drenagem, erosão e deposição. Este estudo objetivou avaliar os atributos físicos e químicos do solo, em uma topossequência de origem basáltica, na região de Batatais (SP). A área possui relevo aplanado e altitude oscilando entre 740 m e 610 m, em região dominada por basaltos. Foi estabelecido caminhamento de 3.000 m, a partir do espigão da vertente, no seu declive mais suave. As superfícies geomórficas foram identificadas e delimitadas conforme critérios topográficos e estratigráficos, com base em intensas investigações detalhadas de campo. Foram coletadas amostras laterais aos perfis modais representativos das diversas superfícies geomórficas (S.G.) da topossequência (S.G. I = topo; S.G. II = meia encosta e sopé de transporte; S.G. III = ombro e sopé de deposição), totalizando 142 amostras. Além disto, foram abertas trincheiras, nos segmentos de vertente inseridos nas superfícies geomórficas mapeadas. As amostras coletadas foram analisadas quanto à densidade do solo, textura, bases trocáveis (Ca2+, K+ e Mg2+), soma de bases, capacidade de troca catiônica, saturação por bases, pH (água e KCl), SiO2, Al2O3, Fe2O3 (ataque por H2SO4), óxidos de Fe livres extraídos com ditionito-citrato-bicarbonato e Fe mal cristalizado extraído com oxalato de amônio. Os resultados revelaram que os solos oriundos de basalto apresentaram atributos físicos e químicos com comportamento dependente das formas do relevo. Com o uso de técnicas estatísticas multivariadas, foi possível distinguir três diferentes ambientes, que equivalem às três superfícies geomórficas.

Estudo do comportamento eletroquímico da enzima peroxidase na presença de peróxido de hidrogênio e ácido 5-aminossalicílico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Manutenção da qualidade de rosas cortadas cv. Vega em soluções conservantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do oxalato de amônio na formação do precursor columbita obtido pelo método Pechini

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Método sol-gel modificado para obtenção de alumina nanoencapsulada com terras raras

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Soluções de manutenção na pós-colheita de Chrysanthemum morifolium cv. Dragon

O desenvolvimento e uso de técnicas que prolonguem a durabilidade das flores, mantendo a qualidade do produto, é imprescindível para redução de perdas pós-colheita. Objetivou-se, neste trabalho, avaliar soluções de manutenção, associadas ou não a sacarose, na manutenção da qualidade pós-colheita de hastes de crisântemos. O experimento foi conduzido sob delineamento inteiramente casualizado, em esquema fatorial, com cinco tratamentos e três repetições, com 2 hastes florais cada uma. Os tratamentos utilizaram água destilada; 8-HQC a 100 mg L-1; 8-HQC a 100 mg L-1 + sacarose a 50 g L-1, 8-HQC a 200 mg L-1; 8-HQC a 200 mg L-1 + sacarose a 50 g L-1. Foram feitas avaliações físicas: coloração, massa fresca e conteúdo relativo de água (CRA); avaliações químicas: açúcares redutores e pigmentos; e avaliações qualitativas: turgescência, cor das flores, e número de botões, flores entreabertas e abertas. A combinação de 8-HQC 200 mg L-1 + sacarose a 50 g L-1 foi a que apresentou melhor desempenho para a manutenção da qualidade das hastes florais, favorecendo a abertura de botões e a turgescência das lígulas. A sacarose contribuiu para uma melhor manutenção de substâncias de reserva na haste, que tiveram a sua vida de vaso estendida.

Evaluation of rare earth oxides doping SnO2.(Co1/4,Mn3/4)O-based varistor system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of ceramic powders used in the inCeram systems to fixed dental Prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Epitaxially grown LiNbO3 thin films by polymeric precursor method

LiNbO3 thin films were grown on (0001) sapphire substrates by a chemical route, using the polymeric precursor method. The overall process consists of preparing a coating solution from the Pechini process, based on metallic citrate polymerization, the precursor films, deposited by dip coating, are then heat treated to eliminate the organic material and to synthesize the phase. In this work, we studied the influence of the heat treatment on the structural and optical properties of single-layered films. Two routes were also investigated to increase the film thickness: increasing the viscosity of the coating solution and/or increasing the number of successively deposited layers. The x-ray diffraction theta -2 theta scans revealed the c-axis orientation of the single- and multilayered films and showed that efficient crystallization can be obtained at temperatures as low as 400 degreesC, the phi-scan diffraction evidenced the epitaxial growth with two in-plane variants, A microstructural study revealed that the films were crack free, homogeneous, and relatively dense. Finally, the investigation of the optical properties (optical transmittance and refractive index) confirmed the good quality of the films. These results indicate that the polymeric precursor method is a promising process to develop lithium niobate waveguides.

Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate

ZrTiO4 (ZT), obtained by the Pechini method, was used as precursor for obtaining PLZT (lead lanthanum zirconium titanate). An aqueous solution of oxalic acid was prepared with particles of ZT, Pb(NO3)(2) and La2O3. After the PbC2O4 and La2O3 precipitate on ZT particles, the materials were calcined and X-ray diffraction (XRD) showed the cubic phase of PLZT. This material was sintered, in two steps, and a density of about 8.0 g/cm(3) was obtained. After the second sintering the XRD pattern showed the occurrence of tetragonal and rhombohedral phases. This was caused by a stoichiometric deviation and the material showed a high optical transparency. (C) 1998 Elsevier B.V. B.V. All rights reserved.

High Verdet constant Ga : S : La : O chalcogenide glasses for magneto-optical devices

The magneto-optical rotation at room temperature was measured for three Ga:S:La:O chalcogenide glasses at several laser lines in the visible. The first sample was a binary system constituted by 70 mol % Ga2S3 and 30 mol % La2O3, whereas in the second and third ones the lanthanum oxide was partially substituted by lanthanum sulfide, keeping the amount of gallium sulfide fixed. A pulsed magnetic field between 50 and 80 kG was used for the Faraday rotation measurements. The Verdet constant for one of the ternary samples was found to be as high as 0.205 min G(-1) cm(-1) at 543 nm, indicating that these chalcogenide glasses are very promising for magneto-optical applications. The data for each sample were fitted using the expected analytical expression for the magneto-optical dispersion. Measurements of the refractive index of the glasses at 632.8 nm are also reported. Data on the magneto-optical properties of two high Verdet constant, heavy-metal oxide diamagnetic glasses are also included for comparison. (C) 1999 Society of Photo-Optical Instrumentation Engineers. [S0091-3286(99)00102-6].

Demulsification of water/sunflower oil emulsions by a tangential filtration process using chemically impregnated ceramic tubes

A tangential filtration process was implemented in this study using porous ceramic tubes made of alpha-alumina produced by the slip-casting technique. These tubes were sintered at 1450 degrees C and characterized by mercury intrusion porosimetry, which revealed a mean pore size of 0.5 mu m. The tubes were chemically impregnated with a zirconium citrate solution, after which they were calcined and heat treated at temperatures of up to 600 and 900 degrees C to eliminate volatile organic compounds and transform the zirconium citrate into zirconium oxide impregnated in the alumina in the form of nanoparticle agglomerates. The microporous pipes were tested on a microfiltration hydraulic system to analyze their performance in the demulsification of sunflower oil and water mixtures. The fluid-dynamic parameters of Reynolds number and transmembrane pressure were varied in the process. The volume of permeate was analyzed by measuring the Total Organic Carbon concentration (TOC), which indicated 99% of oil phase retention. The emulsified mixture was characterized by optical microscopy, while the morphology and composition of the impregnated microporous tubes were analyzed by scanning electron microscopy (SEM). Quantification of the TOC values for the tube impregnated once at 600 degrees C showed the best demulsification performance, with the concentration on permeate smaller than 10 mg/L. The impregnated tube sintered once at 900 degrees C presented low carbon concentration (smaller than 20 mg/L), has the advantage of presenting the greatest trans-membrane flux in relation to the other microporous tube. (c) 2006 Elsevier B.V. All rights reserved.