394 resultados para Tumores de vasos sanguíneos
Resumo:
The paper presents the radiometric parameters determined by the medical physicist during routine radiotherapy planning service in cases of breast cancer . The contours of the breast volume in patients undergoing radiation breast tumors at the Hospital das Clinicas, Faculty of Medicine , UNESP, Botucatu ( HCFMB ) during the year 2012 were analyzed . In order to analyze the influence of physical and radiometric parameters for the determination of the dose distribution of irradiated breast volume , four measurements of isodose curves were prepared in four different heights breast , and compared with the isodose curves plotted computationally . In the routine of planning , the medical physicist must determine the isodose curve that gives the best dose distribution homogeneity in the irradiated volume . The choice of the treatment plan can be done by dedicated computer systems , which require significantly costly investments available services having better financial support . In the Service of Medical Physics , Department of Radiotherapy , HC FMB , we use a two-dimensional software for determination of isodose curves , however , this software is out of date and frequently becomes inoperable due to the lack of maintenance and it is a closed system without feasibility of interference from computer professionals . This fact requires manual preparation of isodose curves , which are subject to uncertainties due to the subjectivity in the clinical interpretation of medical radiation oncologist and medical physicist responsible for planning , plus dispendiar significant calculation time . The choice of the optimal isodose curve depends on the energy of the radiation beam , the geometry and dimensions of the irradiated area . The contours of the breast studied in this work evaluations showed that , for a given energy input , such as the energy of 1.25 MeV of gamma radiation Unit Telecobaltoterapia , the determination of the percentage depth dose ( PDP ) ...
Resumo:
This work is to analyze the behavior of context concentrated stresses generated around a nozzle connected to a pressure vessel. For this analysis we used the finite element method via a computer interface, the software ANSYS WORKBENCH. It was first necessary to study and intensive training of the software used, and also a study of the ASME Code, Section VIII, which is responsible for the standards used in pressure vessels. We analyzed three cases, which differ primarily in the variation of the diameter of the nozzle in order to analyze the variation of the stresses according to the variation of the diameters. The nozzle diameters were 35, 75 and 105 mm. After the model designed vessel, a pressure was applied on the innervessel of 0.5 MPa. For the smallest diameter, was found the lowest tensions concentrated. Varying between 1 and 223 MPa. Increasing the diameter of the nozzle resulted in increased tensions concentrated around the junction nozzle /vessel. The maximum stresses increased by 78% when the value was increased in diameter from 35 to 75 mm. Since the increase in diameter from 75 to 105 mm, the values of the tensions increased around 43%. These figures emphasize that stress concentrations increased with increasing the diameter of the nozzles, but not linearly
Resumo:
Pós-graduação em Biotecnologia Animal - FMVZ
Resumo:
Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB
Resumo:
In this work it was made analysis of a simple pressure vessel, using the analytical development studied in Mechanics of Materials disciplines, and then using the standard required by ASME. Following the simulation was realized using Autodesk Mechanical Simulation software to calculate the principal stresses in a pressure vessel. The simulation was done in a single vessel without nozzles, compared with the analytic calculation. After that, the simulation of another fictitious pressure vessel was done by adding three nozzles to verify the influence of the nozzles in the principal stresses and compared with the analytical results. After the simulation, it was found that the principal are bigger in the pressure vessel with nozzles, but they decrease at a small distance from the nozzle becoming equal to the stresses in the vessel without nozzles. The analytical results calculated according to the ASME agree with simulated results
Resumo:
This study objective was to review a selection of publications on the treatment of benign and malignant tumors with the use of natural medicines obtained from terrestrial and marine flora, both for use in chemotherapy and photodynamic therapy. There are many medications already being used for this purpose and many are still being tested in vivo and in vitro, but all with great future prospects for inclusion in the market
Resumo:
Pós-graduação em Ciência Animal - FMVA
Resumo:
Dexamethasone (DEXA) is a synthetic glucocorticoid widely used in the handling of several drugs, for its proven benefits in fighting inflammation and allergies. Despite their benefits, their chronic use leads to several side effects that include changes in the body in the metabolism of carbohydrates, lipids and proteins. Moreover, being an anti-inflammatory, acts on the arachidonic acid pathway, reducing the expression of the enzyme cyclooxygenase (COX-2) and growth factor derived from the endothelium of blood vessels (VEGF) in various tissues. However, its effects on the myocardium are still uncertain. The physical training (PT), in turn, promotes effects contrary to those caused by chronic use of DEXA, however, little is known about the preventive effects of TF in the side effects of Dexa in the myocardium. Therefore, the aim of this study was to determine if the TF has the ability to prevent and/or mitigate the effects of Dexa in protein expression of COX-2 and VEGF in the myocardium. Forty animals were divided into 4 groups: sedentary control (SC), sedentary treated with Dexa (SD), trained control (TC) and Trained treated with Dexa (TD) and submitted to a protocol of physical training on the treadmill for 70 days (1 h/day-5 days per week, 60% of physical capacity) or kept sedentary. Over the past 10 days, rats were treated with Dexa (Decadron, 0.5 mg/kg per day, ip) or saline. During training the animals were weighed weekly and during treatment daily. At the end of treatment was made to measure fasting glucose levels of animals. The rats were killed with excess anesthesia and cardiac muscle was removed, weighed, homogenized, centrifuged and stored at -20° C for analysis of protein expression of VEGF and COX-2 by Western blotting technique. Treatment with dexamethasone caused a weight loss of 18% in sedentary animals and 13% in trained as well as elevated levels of fasting glucose in sedentary (88%). The TF was unable to mitigate the loss in...
Resumo:
Neoplasias of the head and neck correspond to the fifth most common cancer in the world, with high mortality and morbidity. The aim of this study was to show, through a literature review, a little about the epidemiology, risk factors, diagnosis and therapy of the most common malignant tumors of each anatomical region of the head and neck. The research of the articles was made in MEDLINE data base, with a total of 52 articles used. In this review, we analyze the main aspects related to the tumors of oral cavity, pharynx, larynx and salivary glands. Almost all cancers of the head and neck affecting the mucosa of the upper aerodigestive tract are derived from squamous cells. Therefore, the risk factors between the various types of tumors are similar, with alcohol and tobacco being the main ones. To be composed of several distinct structures, the head and neck tumors deserve a diagnostic and therapeutic approach individualized for each anatomical region. Controllingthe risk factors and doing the right approach, it is expected that the incidence of cancers of the head and neck decreases, thereby reducing mortality from malignant neoplasms worldwide
Detecção molecular do rearranjo Line-1 /c-Myc em tumores venéreos transmissíveis caninos espôntaneos
Resumo:
Transmissible venereal tumor (TVT) is a neoplasia that develops naturally in dogs. It can be easily transplanted, which demonstrates its ability to spread from animal to animal. Since the Linr-1/c-MYC rearrangement in TVT cells had not been studied at the Veterinary Hospital of the Veterinary School, Unesp in Botucatu, SP, this study aimed to detect this genetic alteration specific to this kind of tumor by means of the polymerase chain reaction (PCR). Twenty dogs with cytological diagnosis of TVT were used. Samples of neoplastic cells were collected to determine the presence of the Line-1/c-MYC marker. The rearrangement characterized by 340bp amplicons did not vary, in agreement with previous studies using the same methodology. This contributed to a more precise identification of persistent tumor cells in cases in which gross or microscopical detection was not possible.
Resumo:
The feeding diets were evaluated containing low and high levels of soybean oil for horses athletes subjected to two protocols of aerobic training on the response of basal blood biochemical parameters. Four horses were used in latin square design with treatments in a 2 x 2 factorial arrangement. Treatments consisted levels of 5 and 15% oil concentrates and two aerobic training, 40' and 60' minutes. Plasmatic parameters were monitored, triglyceride (TG), total cholesterol (TC), glucose (GLU) and lactate (LAC), during basal metabolism. The TG, TC, GLU and LAC from horses at rest were not affected (P> 0.05) neither of diet and physical activity, 0.21, 3.79, 4.18, 0.93 mmol L-1, respectively. It can be concluded that offer concentrate with high content of soybean oil to athletic horses in aerobic activities can be performed without altering the blood biochemical profile of basal metabolism.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
In a market environment increasingly competitive, the companies need to control of this process accurately, avoiding rework or rejection of materials during industrialization. This can be achieved by defining procedure that assure the maintenance of the materials characteristics, as specified initially in the projects. This graduation work has the objective of defining the best heat treatment parameter of normalizing for Heads, part of a pressure vessel, formed in P275NH material. The methodology applied is based on the execution of a sequence of Heat Treatments, using different parameters. The process variables were the cooling velocity, the hold time and the hold temperature variation. As a result of this study, it is noticed that the mechanical properties of the materials are strongly influenced by the hold temperature variation and by the cooling velocity, both determined for the heat treatment cycle
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)