Efeito da variação da velocidade de corte e de avanço no torneamento de Eucalipto

Due to the rapid development of some species such as pine and eucalyptus and a growing demand for raw materials, timber, there was a need for detailed studies to better use and higher quality in products derived from wood. In order to contribute to to better utilization of wood ,this study aims to analyze the quality of the wood surface after machining Corymbia citrodora around, with varying feed rates (40, 70, 100 mm/mim), shear rate (1.88, 2.19, 2.51 m/s) and with the use of inserts for turning new and used (cemented carbide). 18 were used bodies and each body was made three different assays for each test were a total of 54 tests three replicates. This study will also addres the analysis of power consumption for each of the tests. With the results obtained through experiments, including the surface roughness of parts and power consumption for each test, we try to evaluate the power consumption in machining with the variations in cutting speed and feed, with two tools carbide

Controle de velocidade e tração de rodas independentes para veículos elétricos

This work presents a proposal to replace thetraditional system of traction electric car that usesone electric motor and a mechanical differential, by two electric motors of lower power, controlled byelectronic control low cost. The proposed control isopen loop and uses the technique of Pulse WidthModulation (PWM), discrete and synchronizedaiming to reduce the generation of harmonics. The implementation of two smaller motor one on each wheel-drive distributes the weight of the vehicle, improving the heat exchange of the windings,beyond enable the power components supporting a current of 50% predicted for only one motor . The solution adopted for being open-loop, has a similar behavior to the mechanical differential, where theeffort imposed by the trajectory makes the velocity distribution between the wheels be appropriate tovehicle trajectory

Efeito da ativação física e química do gel clareador na velocidade de penetração do peróxido de hidrogênio: estudo in vitro

This study evaluated the effect of physical and chemical activation on the speed of penetration of hydrogen peroxide bleaching agents present in different concentrations through the enamel and dentin. One hundred and twenty bovine incisors were used, which were obtained enamel/dentin discs of the buccal surface, with 6 mm in diameter. The samples were divided into six groups: G1 - Hydrogen Peroxide Gel 20%, G2 - Hydrogen Peroxide Gel 20% with light activation, G3 - Hydrogen Peroxide Gel 20% with Manganese Gluconate; G4 - Hydrogen Peroxide Gel 35%; G5 - Hydrogen Peroxide Gel 35% with the light activation and G6 - Hydrogen Peroxide Gel 35% with Manganese Gluconate. The specimens were placed in a transparent support on which there was a substance sensitive to hydrogen peroxide immediately below and in contact with the specimen. After the procedures for applying the gel for each group, one video camera was positioned and operated to monitor the time of penetration of peroxide in each specimen. The recording ended after changing the color of the fluid revealed in all specimens and times were noted for comparison. ANOVA analysis showed that concentration and type of activation of bleaching gel significantly influenced the diffusion time of hydrogen peroxide (P 0.05). 35% hydrogen peroxide showed the lowest diffusion times compared to the groups with 20% hydrogen peroxide gel. The light activation of hydrogen peroxide decrease significantly the diffusion time compared to chemical activation. The highest diffusion time was obtained with 20% hydrogen peroxide chemically activated. The diffusion time of hydrogen peroxide was dependent on activation and concentration of hydrogen peroxide. The higher concentration of hydrogen peroxide diffused through dental tissues more quickly

Modulação da velocidade do andar em indivíduos com doença de Parkinson em estágio leve e moderado

A doença de Parkinson (DP) é uma patologia crônica, degenerativa e progressiva acarretada pela perda de neurônios dopaminérgicos da substância negra (parte compacta), localizada nos núcleos da base. Os comprometimentos na marcha estão entre as principais consequências da DP. Entretanto, pouco se conhece sobre o efeito do estágio da doença na modulação da velocidade do andar. Assim, o objetivo do estudo foi verificar como pacientes em diferentes estágios da DP modulam os parâmetros do andar quando requeridos a andar em máxima velocidade. Os participantes do estudo foram indivíduos com DP idiopática em estágio unilateral (entre 1 e 1,5 na Escala de Hoehn & Yahr) e bilateral (entre 2 e 3 na Escala de Hoehn & Yahr). Inicialmente, os participantes foram submetidos a uma avaliação clínica, realizada por um médico neuropsiquiatra, para verificar o acometimento geral e o estágio da doença. Os dados da avaliação clínica foram utilizados para a distribuição dos participantes entre os dois grupos. Em seguida, os participantes foram convidados a andar sobre uma passarela de 10m de comprimento em duas condições experimentais: Velocidade preferida e velocidade máxima. Somente o grupo bilateral não foi capaz de modular o comprimento da passada na condição de velocidade máxima. Os resultados sugerem que a evolução da DP compromete a capacidade dos pacientes em modular a amplitude de movimentos (comprimento da passada) quando são requeridos a andar em velocidade máxima

Velocidade de semeadura e profundidade da haste em sistema plantio direto de milho e soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Estudo da velocidade de despassivação de aços em estruturas de concreto armado, em meio de cloreto

The aim of the present study was to investigate the corrosion resistance in chloride medium of two cylindrical steel samples from civil construction (CA-50 and CA-60). For this purpose, electrochemical measurements were performed in NaCl solution, 4.0 g/L, naturally aerated. According to electrochemical responses, it was observed an active dissolution process at open circuit potential for both steels. In this comparative study, the differences between CA-50 and CA60 were not significant, since the values of polarization resistance estimated by EIS were the same order of magnitude for both types of steel (oscillating between 200 and 500 Ohm). For all evaluated thicknesses of concrete reinforcement, these values ranged between 2 and 9 kOhm, and the lower value was associated with lower thickness, particularly at 7, 21 and 35 days. When these results were compared with those determined for the CA-60, it was found that the layer of concrete reinforcement provide a protection against corrosion in chloride medium at least ten times larger

Biodessulfurização do biogás gerado no processo de digestão anaeróbia da estação de tratamento de efluentes de uma indústria cervejeira

Pós-graduação em Química - IQ

Determinação das melhores condições de hidrólise física com ultrassom de potência em resíduos de amendoim

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A articulação do quadril em uma perspectiva preditora da velocidade de marcha em idosas e como foco de intervenção de duas modalidades terapêuticas: Método Pilates e Haste Vibratória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise experimental da resistência à corrosão e da velocidade de corrosão: uma proposta pedagógica

In this work it is proposed the use of a chemical activity, in which a corrosion process occurs, aiming to provide to the student relationship among the learning concepts and corrosion phenomena that occur everyday. It is suggested that the experiment development is based on Vygotsky theory, so that students work in groups, which may facilitate social interaction among students and results discussion among groups under professor guidance. This proposal can provide the involved concepts learning, as well as student training such as a critical and reflexive individual.

Relacionamento entre as variáveis da corrida de aproximação e da posição de pé de apoio com a velocidade da bola nos chutes com o membro dominante e não dominante

The aim of the study was to analyze the relationship between run-up spatial-temporal variables with ball velocity in the dominant and non-dominant kicks, and to compare the ball velocity between contralateral limbs. Six futsal players (aged 13 and 14 years) participated in the study. The participants performed 4 kicks with maximal velocity in the stationary ball with each limb. Participants’ movements were recorded by 4 digital cameras (120 Hz). Dvideow software was used for kinematic procedures. The variables analyzed were: length and width of the last but one step and last step before ball contact, distance of the support foot to the ball, run-up velocity and ball velocity. The relationship between spatial-temporal variables with the ball velocity was analyzed by linear regressions with ball velocity as dependent variable. Student t test for paired samples was used to compare ball velocity between dominant and non-dominant kicks. For the dominant limb, the ball velocity was predicted only by the run-up velocity in 16.7%, while for the non-dominant limb only the distance of the support foot to the ball was prognostic variable in 11.9%. The ball velocity was greater for the dominant limb. Run-up variables that predictive ball velocity were different between the dominant and non-dominant kicks.

Relação dos saltos vertical, horizontal e sêxtuplo com a agilidade e velocidade em crianças

The aim of the present study were: 1) To verify the relationship of vertical, horizontal and sextuple jumps with agility and velocity of 5, 10 and 25 m; 2) To verify the capacity of these jumps to predict the agility and 5, 10 and 25 m velocity performance in children. Twenty eight boys (9.47 ± 0.64 years) and thirty girls (9.69 ± 0.70 years) were evaluated. The correlation values between agility and velocity on 5, 10 and 25 m velocity were, respectively, r = 0.63, 0.51, 0.44 and 0.64 with vertical jump, r = 0.68, 0.62, 0.28 and 0.62 with sextuple jump, and r = 0.60, 0.50, 0.26 and 0.57 with horizontal jump. The vertical and sextuple jumps were able to predict the agility and 25 m velocity performance (p < 0.05). Furthermore, they demonstrated capacity to predict 5 and 10 m velocity, respectively (p < 0.05). The vertical and sextuple jump tests may be used for assessment and control of training with children practicing activities that require agility and velocity, since both jumps predicted the agility and velocity performance, which did not occur with the horizontal jump.

Qualidade da operação de semeadura de uma semeadora adubadora de plantio direto em função do tipo de martelete e velocidade de deslocamento

The current paper had as its objective to analyze the precision planter's operational performance according to five different displacement velocities and two types of jumpers for planting no-tillage corn. The utilized experimental delineation consisted of blocks at random with parcels subdivided in factorial scheme 2x5, two types of jumpers (4 and 5 staples) and five different displacement velocities (3.0; 4.5; 5.0; 7.0 e 9.0 km h-1) with four repetitions and by applying the average comparation test, as for the jumpers effects as for the displacement velocities effects, to the significance level of 5%. It was evaluated the data concerned to the longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, survival indices, mechanical harm on seeds, germination tests and grain production. It was also observed the planter displacement velocity effect of on variables as: longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, mechanical harm and yield. The survival indice of plants were high for all the studied velocities and jumpers. Among the studied velocities, the one of 5.0 km h-1 presented the highest yield to both types of jumpers.

Avaliação do tempo de resposta de um controlador de fluxo com DGPS submetido à variação de velocidade de voo em condições de voo simulado em laboratório

The application of pesticides is one of the most important steps in the agricultural production process. The spray volume can directly affect application success, and this parameter is directly dependent on the displacement speed of the sprayer. In conventional systems, the operator has to maintain a constant speed to ensure uniform application along the tracks. In order to improve over application quality and preserve levels of precision for applied doses; the use of electronic flow control systems allows for automatic adjustment of volume applied over the area when there is a change in velocity during application. The objective of this research was to study the response times of a flow controller with DGPS for aerial application subjected to variations of velocity in laboratory simulated flight conditions. For this purpose, a bench test has been developed including software for simulating DGPS signals, which was used to simulate different flight speeds and conditions. The results showed the average response time from the flow controller to a change in velocity to be between 6 and 20 seconds. Variations in total flow and the controller setting had a significant influence on response time with situations where there was interaction between the factors being evaluated. There was a tendency for better response times using a constant setting for the control algorithm other than that specified by the manufacturer. The flow controller presented an average error rates below 2% in all evaluated operating conditions, providing satisfactory accuracy in determining the output of product in different test situations.