Optimal design of smart structures using bonded plezoelectrics for vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures which are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains, is a very important issue. For that purpose, smart material modelling, modal analysis methods, control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first one is related to the discrete optimal actuator location selection problem which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.

Optimal placement of piezoelectric sensor/actuators for smart structures vibration control

Smart material technology has become an area of increasing interest for the development of lighter and stronger structures that are able to incorporate actuator and sensor capabilities for collocated control. In the design of actively controlled structures, the determination of the actuator locations and the controller gains is a very important issue. For that purpose, smart material modeling, modal analysis methods, and control and optimization techniques are the most important ingredients to be taken into account. The optimization problem to be solved in this context presents two interdependent aspects. The first is related to the discrete optimal actuator location selection problem, which is solved in this paper using genetic algorithms. The second is represented by a continuous variable optimization problem, through which the control gains are determined using classical techniques. A cantilever Euler-Bernoulli beam is used to illustrate the presented methodology.

Perineural Invasion in Aggressive Skin Carcinomas of the Head and Neck

Introduction: Perineural invasion is a well-recognized form of cancer dissemination. However, it has been reported only in few papers concerning cutaneous carcinomas ( basal cell, BCC, and squamous cell, SCC). Moreover, the incidence is considered to be very low. Niazi and Lambert [Br J Plast Surg 1993; 46: 156-157] reported only 0.18% of perineural invasion among 3,355 BCCs. It is associated with high-risk subtypes, as morphea-like, as well as with an increased risk of local recurrence. No paper was found in the literature looking for perineural invasion in very aggressive skin cancers with skull base extension, with immunohistochemical analysis. Methods: This is a retrospective review, including 35 very advanced skin carcinomas with skull base invasion (24 BCCs and 11 SCCs, operated on at a single institution from 1982 to 2000). Representative slides were immunohistochemically evaluated with antiprotein S-100, in order to enhance nerve fibers and to detect perineural invasion. The results were compared to 34 controls with tumors with a good outcome, treated in the same time frame at the same Institution. Results: Twelve (50.0%) of the BCCs with skull base invasion had proven perineural invasion, as opposed to only 1 (4.6%) of the controls, and this difference was statistically significant (p < 0.001). Regarding SCCs, 7 aggressive tumors (63.6%) showed perineural invasion compared to only 1 (10.0%) of the controls, but this difference did not reach significance (p=0.08), due to the small number of cases. Conclusions: In this series, it was demonstrated that immunohistochemically detected perineural invasion was very prevalent in advanced skin carcinomas. In addition, it was statistically associated with extremely aggressive BCCs with skull base invasion. Copyright (c) 2008 S. Karger AG, Basel

Avaliação cefalométrica do perfil mole de pacientes face longa submetidos à cirurgia ortognática: estudo retrospectivo

OBJETIVO: o presente trabalho propôs-se a comparar o perfil tegumentar pós-operatório de pacientes Classe II, Padrão Face Longa, submetidos ao tratamento ortodôntico-cirúrgico, com os parâmetros descritos na análise cefalométrica de Legan e Burstone. METODOLOGIA: 32 telerradiografias pós-cirúrgicas, com um mínimo de 6 meses de acompanhamento, foram submetidas a traçado manual (repetido 4 vezes) e digitalização (também repetida 4 vezes) no programa DFPlus para análise cefalométrica. RESULTADOS: os resultados permitiram verificar que 9 das 11 medidas avaliadas encontravam-se estatisticamente diferentes da norma avaliada; contudo, ao se verificar o desvio padrão permitido na norma, os achados deste trabalho situam-se dentro da mesma, com exceção do ângulo mentocervical. CONCLUSÃO: as condições experimentais deste estudo permitiram concluir que, embora a população estudada tenha obtido resultados estéticos-funcionais satisfatórios, não se enquadrou nas normas da análise de Legan e Burstone, o que indica que a avaliação após a cirurgia ortognática deve ser principalmente clínica e que a estética facial não está totalmente relacionada com as medidas préestabelecidas na análise cefalométrica.

Evaluation of Rat Alveolar Bone Response to Angelus MTA or Experimental Light-cured Mineral Trioxide Aggregate Using Fluorochromes

Introduction: The aim of this study was to evaluate the rat alveolar bone response after the implantation of experimental light-cured mineral trioxide aggregate (MTA) or Angelus MTA (Angelus, Londrina, Parana, Brazil) by histological and fluorescence analysis. Methods: Thirty Wistar Albino rats were divided into three groups. In the control group, empty polyethylene tubes were inserted into the rat alveolar sockets immediately after extraction. In the other groups, the tubes were filled with light-cured MTA or Angelus MTA. Five animals from each group were injected with calcein on day 7, alizarin on day 14, and oxytetracycline on day 21. on day 30, these animals were killed, and the right hemimaxillas were removed and histologically processed. Half of the maxillas were processed and stained with hematoxylin and eosin. The remaining maxillas were processed for fluorescence analysis and stained with Stevenel blue and alizarin red. New bone was histomorphometrically evaluated using a Merz grid. Results: The light-cured MTA presented a similar response when compared with Angelus MTA; it was characterized by a mild inflammatory response and complete bone healing. In the light-cured MTA group, the fluorescence areas were more evident at 21 days, showing an increase in bone formation. However, dystrophic mineralization was observed only with Angelus MTA. Conclusions: It was concluded that both materials present a similar inflammatory response and bone healing, but dystrophic mineralization was observed only with Angelus MTA. (J Endod 2011;37:250-254)

Effect of cyclosporin A on alveolar bone homeostasis in a rat periodontitis model

Objectives: the administration of cyclosporin A has been associated with significant bone loss and increased bone remodeling. The present investigation was designed to evaluate the effects of cyclosporin A on alveolar bone of rats subjected to experimental periodontitis, using serum, stereometric and radiographic analysis.Methods: Twenty-four rats were divided into one of the following groups with six animals each: group I, control rats; group II, in which the animals received a cotton ligature around the lower first molars; group III, in which the rats received a cotton ligature around the lower first molars and were treated with 10 mg/(kg body weight day) of cyclosporin A; group IV, in which the rats were treated with 10 mg/(kg body weight day) of cyclosporin A. At the end of experimental period, at 30 days, animals were killed and the serum calcium and alkaline phosphatase levels were measured in all groups. The distance from the alveolar bone crest to the cemento-enamel junction was measured radiographically for each mesial surface of the lower first molars of each rat. After histological processing, the stereological parameters: volume densities of multinucleated osteoclasts (V-o), alveolar bone (V-b), marrow (V-m), and relation of eroded surface/bone surface (Es/Bs) were assessed at the mesial region of the alveolar bone.Results: Significant decreases in serum calcium were observed in those groups that received cyclosporin A therapy. No significant changes in serum alkaline phosphatase were observed. The therapy with cyclosporin A combined with the ligature placement decreased the V-b and increased the V-o, V-m and Es/Bs at the mesial surface of lower first molars. on the other hand, the radiographic data showed that cyclosporin A therapy diminished the alveolar bone loss at the mesial surface of the lower first molars.Conclusions: Therefore, within the limits of this study, we suggest that cyclosporin A at immunosuppressive levels can bring about an imbalance in the alveolar bone homeostasis in rats. However, in the presence of inflammatory stimulation, the inhibition of the immune system by cyclosporin A may decrease the initial periodontal breakdown.

Níveis de sedação determinados pela clonidina e midazolam na medicação pré-anestésica: avaliação clínica e eletroencefalográfica bispectral

JUSTIFICATIVA E OBJETIVOS: Verificar o efeito sedativo da clonidina, um a2-agonista, e do midazolam, um benzodiazepínico, quando utilizados na medicação pré-anestésica, empregando-se avaliação clínica e eletroencefalográfica bispectral. MÉTODO: Após aprovação institucional e consentimento escrito fornecido, 45 pacientes de 18 a 65 anos, estado físico ASA I, foram aleatoriamente distribuídos nos grupos placebo (P), clonidina (C) ou midazolam (M), em que receberam, respectivamente placebo, 150 µg de clonidina ou 15 mg de midazolam por via oral, 60 minutos antes da indução da anestesia (n = 15 por grupo). A monitorização constituiu-se de eletrocardiograma (D II), pressão arterial não invasiva, freqüência cardíaca, saturação de pulso de oxigênio, freqüência respiratória, temperatura axilar e da sala de cirurgia e eletroencefalograma bispectral para determinação do índice bispectral (BIS). Esses atributos e a escala de sedações (1 - ansioso, 2 - calmo, 3 - sonolento, 4 - dormindo com reflexo, 5 - dormindo sem reflexo) foram obtidos aos 0 (M0), 15 (M15), 30 (M30), 40 (M40), 50 (M50) e 60 (M60) minutos após a medicação. RESULTADOS: Nos grupos não houve alteração significante dos parâmetros respiratórios, hemodinâmicos e de temperatura. Houve diferença significante entre os grupos na ES (M60: M=C>P) e no BIS (M50 e M60: M=C>P). CONCLUSÕES: Nas condições utilizadas, a clonidina e o midazolam determinaram níveis de sedação adequados e semelhantes na medicação pré-anestésica de pacientes estado físico ASA I, quando avaliados pela escala de sedação e pelo índice bispectral, sem determinarem alterações hemodinâmicas e respiratórias.

Caracterização morfológica de espécies de trapoeraba (Commelina spp.) utilizando a análise multivariada

As espécies Commelina benghalensis, C. villosa, C. diffusa e C. erecta são conhecidas como trapoeraba e, freqüentemente, são confundidas entre si, dificultando o controle químico, o que pode provocar prejuízos econômicos e danos ambientais. O presente trabalho teve como objetivo selecionar características morfológicas que possibilitem facilitar a identificação dessas espécies, utilizando a técnica de análise multivariada. Foram avaliadas 12 características morfológicas descritivas e 13 quantitativas, utilizando-se os métodos de análise de agrupamento e análise de componentes principais. As espécies apresentaram alto grau de dissimilaridade, sobretudo em relação às características descritivas, destacando-se: hábito da planta, pilosidade do caule e da folha, entre outros. As características quantitativas também mostraram poder discriminatório. Características que apresentaram alto valor taxonômico foram selecionadas para compor a chave de identificação para as quatro espécies de Commelina.

Molecular models of protein targets from Mycobacterium tuberculosis

Structural characterization of enzymes that belong to microbial metabolic pathways is very important for structure-based drug design since some of these proteins may be present in the bacterial genome, but absent in humans. Thus, metabolic pathways became potential targets for drug design. The motivation of this work is the fact that Mycobacterium tuberculosis is the cause of the deaths of millions of people in the world, so that the structural characterization of protein targets to propose new drugs has become essential. DBMODELING is a relational database, created to highlight the importance of methods of molecular modeling applied to the Mycobacterium tuberculosis genome with the aim of proposing protein-ligand docking analysis. There are currently more than 300 models for proteins from Mycobacterium tuberculosis genome in the database. The database contains a detailed description of the reaction catalyzed by each enzyme and their atomic coordinates. Information about structures, a tool for animated gif image, a table with a specification of the metabolic pathway, modeled protein, inputs used in modeling, and analysis methods used in this project are available in the database for download. The search tool can be used for reseachers to find specific pathways or enzymes.

Search for techniparticles in e plus jets events at D0

We search for the technicolor process p(p) over bar ->rho(T)/omega(T)-> W pi(T) in events containing one electron and two jets, in data corresponding to an integrated luminosity of 390 pb(-1), recorded by the D0 experiment at the Fermilab Tevatron. Technicolor predicts that technipions pi(T) decay dominantly into b(b) over bar, b(c) over bar, or (b) over barc, depending on their charge. In these events b and c quarks are identified by their secondary decay vertices within jets. Two analysis methods based on topological variables are presented. Since no excess above the standard model prediction was found, the result is presented as an exclusion in the pi(T) vs rho(T) mass plane for a given set of model parameters.

Evidence for production of single top quarks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamics of two satellites in the 2/1 Mean-Motion resonance: application to the case of Enceladus and Dione

The dynamics of a pair of satellites similar to Enceladus-Dione is investigated with a two-degrees-of-freedom model written in the domain of the planar general three-body problem. Using surfaces of section and spectral analysis methods, we study the phase space of the system in terms of several parameters, including the most recent data. A detailed study of the main possible regimes of motion is presented, and in particular we show that, besides the two separated resonances, the phase space is replete of secondary resonances.

High frequencies of plexiform neurofibromas, mental retardation, learning difficulties, and scoliosis in Brazilian patients with neurofibromatosis type 1

A clinical study of Brazilian patients with neurofibromatosis type 1 (NF1) was performed in a multidisciplinary Neurofibromatosis Program called CEPAN (Center of Research and Service in Neurofibromatosis). Among 55 patients (60% females, 40% males) who met the NIH criteria for the diagnosis of NF1, 98% had more than six café-au-lait patches, 94.5% had axillary freckling, 45% had inguinal freckling, and 87.5% had Lisch nodules. Cutaneous neurofibromas were observed in 96%, and 40% presented plexiform neurofibromas. A positive family history of NF1 was found in 60%, and mental retardation occurred in 35%. Some degree of scoliosis was noted in 49%, 51% had macrocephaly, 40% had short stature, 76% had learning difficulties, and 2% had optic gliomas. Unexpectedly high frequencies of plexiform neurofibromas, mental retardation, learning difficulties, and scoliosis were observed, probably reflecting the detailed clinical analysis methods adopted by the Neurofibromatosis Program. These same patients were screened for mutations in the GAP-related domain/GRD (exons 20-27a) by single-strand conformation polymorphism. Four different mutations (Q1189X, 3525-3526delAA, E1356G, c.4111-1G>A) and four polymorphisms (c.3315-27G>A, V1146I, V1317A, c.4514+11C>G) were identified. These data were recently published.

Some segmental structural features of the aortic wall of domestic chicken (Gallus domesticus)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flow cell within an LED: a proposal for an optical absorption detector

Droplets formed at the tip of a tube under the same conditions possess extreme uniformity of form, volume and weight. These properties of liquid drop formation have been known for a long time and consequently many applications for the drop have been found in instrumentation and chemical analysis methods. In the present paper, we report on the analytical use of a dynamic LED-based flow-through optical absorption detector with optical path length controlled by continuous dropping of a solution. This arrangement consists of a flow cell built within a high-intensity red LED (lambda (max)=630 nm). The feasibility of the detector is demonstrated by colorimetric determination of methylene blue, and ammonium by Berthelot's reaction, in a flow-injection system. For ammonium, the reaction forms a blue dye (indophenol) with a maximum absorption at 630-650 nm. The detection limit, considered as 3 times the signal of the blank, is better than 125 mu g l(-1). The small flow cell represents a good combination of optical path length, low volume and fast washout. This detector can be used advantageously in automated methods and can represent a solution to problems of optical detection involving gas bubbles and precipitation of particles in turbidimetric applications.