Efeitos de parâmetros de fermentação na produção de etanol a partir de resíduo líquido da industrialização da mandioca (manipueira)

Effect of fermentation parameters on ethanol production from cassava liquid residue (manipueira). "Manipueira", a liquid residue from the processing of cassava starch and flour, has recognized high pollution potential. Aiming at a possible use of "manipueira" as raw material for ethanol production, this study aimed to evaluate the effect of the percentage of inoculated yeast and fermentation temperature on the chromatographic profile of the components of wine of "manipueira". The residue was characterized for starch and sugar content, as well as pH and total acidity. The residue was hydrolyzed by the action of enzymes Termamyl 120 L and AMG 300 L. The hydrolysate obtained was fermented under different experimental conditions. A factorial central composite design (2(2)) with two independent variables and the response surface methodology were used to evaluate the results. The results showed a significant effect of variable parameters on the components of wine. The conditions of low fermentation temperature and lower percentages of inoculated yeast were the most appropriate to obtain ethanol from "manipueira".

Probing the Specificity of Binding to the Major Nuclear Localization Sequence-binding Site of Importin-alpha Using Oriented Peptide Library Screening

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cryptic speciation and recombination in the fungus Paracoccidioides brasiliensis as revealed by gene genealogies

Paracoccidioides brasiliensis is the etiologic agent of paracoccidioidomycosis, a disease confined to Latin America and of marked importance in the endemic areas due to its frequency and severity. This species is considered to be clonal according to mycological criteria and has been shown to vary in virulence. To characterize natural genetic variation and reproductive mode in this fungus, we analyzed P. brasiliensis phylogenetically in search of cryptic species and possible recombination using concordance and nondiscordance of gene genealogies with respect to phylogenies of eight regions in five nuclear loci. Our data indicate that this fungus consists of at least three distinct, previously unrecognized species: S1 (species 1 with 38 isolates), PS2 (phylogenetic species 2 with six isolates), and PS3 (phylogenetic species 3 with 21 isolates). Genealogies of four of the regions studied strongly supported the PS2 clade, composed of five Brazilian and one Venezuelan isolate. The second clade, PS3, composed solely of 21 Colombian isolates, was strongly supported by the alpha-tubulin genealogy. The remaining 38 individuals formed S1. Two of the three lineages of P. brasiliensis, S1 and PS2, are sympatric across their range, suggesting barriers to gene flow other than geographic isolation. Our study provides the first evidence for possible sexual reproduction in P. brasiliensis S1, but does not rule it out in the other two species.

Cytogenetic Mapping of rRNAs and Histone H3 Genes in 14 Species of Dichotomius ( Coleoptera, Scarabaeidae, Scarabaeinae) Beetles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification and characterization of polymorphic microsatellite loci in the blue shark Prionace glauca, and cross-amplification in other shark species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A condição das coxas anteriores, do meso-catepímero e do meso-catepisterno dos Tabanidae (Diptera) e sua possível importância na classificação

The condition of certain neglected structures and their possible importance to the classification of the family Tabanidae are studied. The front coxae are considered as belonging to two types: 1) short and robust; 2) long and slender. The posterior edge of the meso-katepimeron presents two conditions: 1) without projection, 2) with backward projection. Similar conditions are found in the meso-Katepisternum, but with intermediate conditions. These characters are discussed in relation to the system proposed for the family by Mackerras. Conditions 1 and 2 of the former two structures separate, respectively, the Pangoniinae and Scepsidinae from the Chrysopsinae and Tabaninae. Condition 2 of the third structure seems to be developing independently in different groups of Tabaninae, with varying degrees of development.

A radiation hybrid map of river buffalo (Bubalus bubalis) chromosome 1 (BBU1)

The largest chromosome in the river buffalo karyotype, BBU1, is a submetacentric chromosome with reported homology between BBU1q and bovine chromosome 1 and between BBU1p and BTA27. We present the first radiation hybrid map of this chromosome containing 69 cattle derived markers including 48 coding genes, 17 microsatellites and four ESTs distributed in two linkage groups spanning a total length of 1330.1 cR(5000). The RH map was constructed based on analysis of a recently developed river buffalo-hamster whole genome radiation hybrid (BBURH5000) panel. The retention frequency of individual markers across the panel ranged from 17.8 to 52.2%. With few exceptions, the order of markers within linkage groups is identical to the order established for corresponding cattle RH maps. The BBU1 map provides a starting point for comparison of gene order rearrangements between river buffalo chromosome 1 and its bovine homologs. Copyright (C) 2007 S. Karger AG, Basel.

Finiteness theorem for topological contact equivalence of map germs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo espectro eletroquímico de sistemas estruturados argila-corante

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anti-Inflammatory Effects of Low-Level Light Emitting Diode Therapy on Achilles Tendinitis in Rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Acid Neutralization and Mechanical Cycling on the Microtensile Bond Strength of Glass-ceramic Inlays

Objectives: To evaluate the hypothesis that a process of hydrofluoric acid precipitate neutralization and fatigue load cycling performed on human premolars restored with ceramic inlays had an influence on microtensile bond strength results (MTBS). Methods: MOD inlay preparations were performed in 40 premolars (with their roots embedded in acrylic resin). Forty ceramic restorations were prepared using glass-ceramic (IPS Empress). The inner surfaces of all the restorations were etched with 10% hydrofluoric acid for 60 seconds, rinsed with water and dried. The specimens were divided into two groups (N=20): 1-without neutralization; 2-with neutralization. All the restorations were silanized and adhesively cemented (self-curing and self-etching luting composite system, Multilink). Ten premolars from each group were submitted to mechanical cycling (1,400,000 cycles, 50N, 37 degrees C). After cycling, the samples were sectioned to produce non-trimmed beam specimens (vestibular dentin-restoration-lingual dentin set), which were submitted to microtensile testing. Results: Bond strength was significantly affected by the surface treatment (p<0.0001) (no neutralization > neutralization) and mechanical cycling (p<0.0001) (control > cycling) (2-way ANOVA and Tukey test, alpha=.05). Conclusion: Hydrofluoric acid precipitate neutralization appears to significantly damage the resin bond to glass-ceramic and should not be recommended. The clinical simulation of the specimens, by using mechanical cycling, is important when evaluating the ceramic-dentin bond.

Infinite symmetries in the Skyrme model

We show that the Skyrme theory possesses a submodel with an infinite number of local conserved currents. The constraints leading to the submodel explore a decomposition of SU(2) with a complex field parametrizing the symmetric space SU(2)/U(1) and a real field in the direction of U(1). We demonstrate that the Skyrmions of topological charges ii belong to such integrable sector of the theory. Our results open ways to the development of exact methods, compensating for the non-existence of a BPS type sector in the Skyrme theory. (C) 2001 Published by Elsevier B.V. B.V.

Kerr-Newman solution as a Dirac particle

For m(2) < a(2) + q(2), with m, a, and q respectively the source mass, angular momentum per unit mass, and electric charge, the Kerr-Newman (KN) solution of Einstein's equation reduces to a naked singularity of circular shape, enclosing a disk across which the metric components fail to be smooth. By considering the Hawking and Ellis extended interpretation of the KN spacetime, it is shown that, similarly to the electron-positron system, this solution presents four inequivalent classical states. Making use of Wheeler's idea of charge without charge, the topological structure of the extended KN spatial section is found to be highly non-trivial, leading thus to the existence of gravitational states with half-integral angular momentum. This property is corroborated by the fact that, under a rotation of the space coordinates, those inequivalent states transform into themselves only after a 4π rotation. As a consequence, it becomes possible to naturally represent them in a Lorentz spinor basis. The state vector representing the whole KN solution is then constructed, and its evolution is shown to be governed by the Dirac equation. The KN solution can thus be consistently interpreted as a model for the electron-positron system, in which the concepts of mass, charge and spin become connected with the spacetime geometry. Some phenomenological consequences of the model are explored.

A statistical law for multiplicities of SU(3) irreps (lambda, mu) in the plethysm {eta} circle times(3) {m} -> (lambda, mu)

A statistical law for the multiplicities of the SU(3) irreps (lambda, mu) in the reduction of totally symmetric irreducible representations {m} of U(N), N = (eta + 1) (eta + 2)/2 with eta being the three-dimensional oscillator major shell quantum number, is derived in terms of the quadratic and cubic invariants of SU(3), by determining the first three terms of an asymptotic expansion for the multiplicities. To this end, the bivariate Edgeworth expansion known in statistics is used. Simple formulae, in terms of m and eta, for all the parameters in the expansion are derived. Numerical tests with large m and eta = 4, 5 and 6 show good agreement with the statistical formula for the SU(3) multiplicities.

Kaon and Pion Electromagnetic Form Factor Ratios in the Light-Front

We have applied the light-front formalism to calculate the electromagnetic form factors for the pion and the kaon from two models at low and high energies in order to explore the differences between such models. We have also compared the results for the ratio F(K)(Q(2))/F(pi)(Q(2)) with the experimental data, up to 10 [GeV/c](2) and we have observed that the theoretical results are in good concordance for low energies, but they are very different at higher energy scales.