Photoelastic Analysis of Stress Distribution With Different Implant Systems

The aim of this study was to evaluate stress distribution with different implant systems through photoelasticity. Five models were fabricated with photoelastic resin PL-2. Each model was composed of a block of photoelastic resin (10 x 40 x 45 mm) with an implant and a healing abutment: model 1, internal hexagon implant (4.0 X 10 mm; Conect AR, Conexao, Sao Paulo, Brazil); model 2, Morse taper/internal octagon implant (4.1 x 10 mm; Standard, Straumann ITI, Andover, Mass); model 3, Morse taper implant (4.0 x 10 mm; AR Morse, Conexao); model 4, locking taper implant (4.0 x 11 mm; Bicon, Boston, Mass); model 5, external hexagon implant (4.0 x 10 mm; Master Screw, Conexao). Axial and oblique load (45) of 150 N were applied by a universal testing machine (EMIC-DL 3000), and a circular polariscope was used to visualize the stress. The results were photographed and analyzed qualitatively using Adobe Photoshop software. For the axial load, the greatest stress concentration was exhibited in the cervical and apical thirds. However, the highest number of isochromatic fringes was observed in the implant apex and in the cervical adjacent to the load direction in all models for the oblique load. Model 2 (Morse taper, internal octagon, Straumann ITI) presented the lowest stress concentration, while model 5 (external hexagon, Master Screw, Conexao) exhibited the greatest stress. It was concluded that Morse taper implants presented a more favorable stress distribution among the test groups. The external hexagon implant showed the highest stress concentration. Oblique load generated the highest stress in all models analyzed.

Influence of Three Types of Abutments on Preload Values Before and After Cyclic Loading with Structural Analysis by Scanning Electron Microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito das cargas de treinamento sobre parâmetros fisiológicos de futebolistas

The aim of this study was to investigate the effects of three weeks of training with intensity monitored on the aerobic capacity of professional soccer players. Fourteen players, members of a first division Brazilian Championship team in 2010, aged 22.78 +/- 3.06 years were evaluated pre and post three weeks of training. The anaerobic threshold intensity LAn was determined by bi-segmented method, for this four submaximal efforts of 800 meters with intensities 10, 12, 14 and 16 km/h were applied. Thirty three training sessions were quantified in zones according to heart rate related to the LAn (FCLAn): Z1 - 10% below, Z2 - 90-100% and Z3 - above the FCLAn. During training participants remained 31.17 +/- 14.86%, 42.96% and 25.87 +/- 14.90 +/- 16.67% in Z1, Z2, and Z3 respectively. There were no significant differences in the LAn (pre = 13,29 +/- 0,71 km.h(-1); post = 12,85 +/- 0,90 km.h(-1)), perceived exertion (pre = 11,53 +/- 1,45 u.a; post = 11,23 +/- 1,53 u.a) and FCLAn (pre = 166,64 +/- 10,69 bpm; post = 174,50 +/- 10,89 bpm) between conditions before and after training, indicating that three weeks of training are insufficient to generate positive changes in soccer players LAn.

Uso de invertase imobilizada em pó de sabugo de milho para produção de açúcar invertido

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O perigo das águas: aspectos do feminino terrível em Gustavo Adolfo Bécquer, Octavio Paz e Eduardo Galeano

Pós-graduação em Estudos Literários - FCLAR

Análise e redução de custos e peso em veículo rodoviário de carga reboque linha de eixos

Load transportation in brazilian territory is made difficult by a deficient highway network, result of low maintenance and lack of government supervision. The problem aggravates when we consider the transportation of indivisible loads, mainly because the brazilian highways are not prepared for such task and few companies in Brazil have the necessary equipment suited for this kind of transport. In this dissertation it will be shown the analysis of a specific equipment to transport overweight indivisible loads, called hydraulic modular multi axle trailer. From an existing project (RB.04LE-01), manufactured and homologated in Brazil, it has been studied how the components in this trailer work so it could have been possible to elaborate a new model (RB.04LE-02), with two main objectives: reduction of costs and weight with subsequent increase in the liquid load for roadway transportation. The trailer’s components analyses were made utilizing the theory of fatigue strength of materials and finite element method with the von Misses criteria for a more safety when realizing the calculations

Comissionamento de turbinas hidráulicas: ensaios de faixa operativa, índex, test e rejeição de carga

With growing electricty demand, the importance of generation through hydropower, a renewable energy source, it’s of great importance. This demand derives from the country’s growth, as well as events that will occur in the coming years. The commission has a crucial role before the entry into operation of hydroelectric plant, sice, ensures a good operation of hydraulic and electrical systems, as well as the safety of the installation. This paper is a case study, commissioning in a PCH in especially the most important tests, such as range operation, índex tes and load rejection. In these trials we can get a Idea of the actual behavior of the unit, as well as future operation maneuvers, and evidence of real efficiency

Efeito do pacing e do exercício prévio na performance aeróbia

The aim of this study was to analyze the influence of prior exercise on different intensity distribution strategies (pacing). The study included five male individuals, apparently healthy, aged between 18 and 25 years, and without regular practice of physical activities. The subjects were tested on different days following the protocols on a cycle ergometer: 1) a progressive ramp test, 2) three constant load tests in the intensities of 85%, 90% and 95% IVO2max to exhaustion, and 3) six tests with and without holding a prior exercise intensity of 70%  with different strategies for Even-intensity pace, ES (401 ± 70 W), which consists of an exercise at a pace and / or constant intensity from beginning to end; where intensity is initially increased to 10% less than the ES progressively increase to reach 10% above the intensity of ES, and; Fast-start; FS, where there is a reversal in the way of distributing intensity, ie the initial intensity is 10% higher than the value of ES decreased progressively to 10% below that ES. All these tests were performed in random order. The tlim with previous exercise was significantly shorter than without previous exercise at FS condition (p < 0.05). The VO2final obtained at ES condition was similar with (3243 ± 599 ml.min-1) and without (3252 ± 384 ml.min-1) previous aerobic exercise (p > 0.05). However, the VO2final obtained at FS condition was higher with (3291 ± 218 ml.min-1) than without (3097 ± 207 ml.min-1) previous aerobic exercise (p < 0.05). The heart rate was higher at ES condition with than without previous aerobic exercise (p < 0.05). There was no significant difference in this variable for FS condition with and without previous aerobic exercise (p > 0.05). It can be concluded that the results the previous exercise (70%) achieved lasting 6 minutes followed by 6 minutes of recovery appears to influence / commit ting the conditions during the pacing for this population

Desenvolvimento e avaliação de uma vacina inativada contra estirpe variante brasileira do vírus da bronquite infecciosa aviária

Pós-graduação em Medicina Veterinária - FCAV

Análise de estabilidade de taludes de aterro de resíduos urbanos utilizando parâmetros geotécnicos de propostas bibliográficas e correlações com Nspt

Pós-graduação em Geociências e Meio Ambiente - IGCE

Relação entre carga parasitária de cães naturalmente acometidos por leishmaniose visceral e infectividade para Lutzomyia longipalpis: Lilian Aparecida Colebrusco Rodas. -

Pós-graduação em Ciência Animal - FMVA

Efeitos de pontos de contato corporal e orientação segmentar na sensibilidade háptica durante o uso do sistema âncora em tarefas de controle postural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determination of soil properties from standard penetration test complemented by torque measurement (SPT-T)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of occlusal contact area on cusp defection and stress distribution

The purpose of this study was to evaluate the effect of occlusal contact area for loading on the cuspal defection and stress distribution in a first premolar restored with a high elastic modulus restorative material. The Rhinoceros 4.0 software was used for modeling the three-dimensional geometries of dental and periodontal structures and the inlay restoration. Thus, two different models, intact and restored teeth with three occlusal contact areas, 0.1, 0.5 and 0.75 mm(2), on enamel at the occlusal surface of buccal and lingual cusps. Finite element analysis (FEA) was performed with the program ANSYS (Workbench 13.0), which generated a mesh with tetrahedral elements with greater refinement in the regions of interest, and was constrained at the bases of cortical and trabecular bone in all axis and loaded with 100 N normal to each contact area. To analysis of maximum principal stress, the smaller occlusal contact area showed greater compressive stress in region of load application for both the intact and inlay restored tooth. However, tensile stresses at the occlusal isthmus were similar for all three tested occlusal contact areas (60 MPa). To displacement of the cusps was higher for teeth with inlay (0.46-0.48 mm). For intact teeth, the smaller contact area showed greater displacement (0.10 mm). For teeth with inlays, the displacement of the cusps were similar in all types of occlusal area. Cuspal displacement was higher in the restored tooth when compared to the intact tooth, but there were no significant variations even with changes in the occlusal contact area. RELEVANCE CLINICAL: Occlusal contacts have a great influence on the positioning of teeth being able to maintain the position and stability of the mandible. Axial loads would be able to generate more uniform stress at the root presenting a greater concentration of load application in the point and the occlusal surface. Thus, is necessary to analyze the relationship between these occlusal contacts as dental wear and subsequent occlusal interferences.

The therapeutic potential of exercise to treat cachexia

To discuss the role of physical exercise in the attenuation of cancer cachexia-associated symptoms, and upon the outcome of chemotherapy, with special focus on the anti-inflammatory role of chronic exercise. The review addresses the recent findings regarding the positive effects of endurance and strength exercise training upon metabolic dysfunction, systemic inflammation and body composition alterations in the syndrome of cachexia. The employment of different exercise protocol strategies, in respect to intensity, duration, work load and in concomitance with pharmacological treatment is considered. Cachexia is a multifactorial wasting syndrome afflicting patients with cancer, chronic obstructive pulmonary disease, chronic heart failure, trauma, among other diseases. This condition markedly compromises the quality of life, treatment outcome and survival. Recent literature indicates an unequivocal role of chronic exercise in modulating cachexia and other cancer-associated dysfunctions. Exercise is proposed as a complementary treatment in cancer, and represents a function-preserving, anti-inflammatory and metabolism-modulating strategy with low cost, and high versatility and availability. Furthermore, exercise decreases cancer recurrence and presents a positive impact on public health management, reducing hospitalization and medication costs.