Desempenho produtivo e atividade microbiana cecal de coelhos alimentados com dietas contendo diferentes níveis de amido

Com o objetivo de avaliar a influência do amido dietético sobre o rendimento produtivo e a atividade microbiana cecal de coelhos em crescimento, quatro dietas experimentais foram elaboradas de forma a conter níveis crescentes de amido (23, 28, 33 e 38% de amido total na base da MS), os quais foram fornecidos a 32 coelhos da raça Nova Zelândia Branco, distribuídos em gaiolas de engorda individuais, seguindo um delineamento em blocos casualizados. Houve efeito linear decrescente para consumo e conversão alimentar, em que valores de 108,67 g/d e 3,216, respectivamente, foram obtidos para os animais alimentados com 38% de amido dietético. No entanto, o ganho de peso e o rendimento de carcaça não foram influenciados pelos tratamentos. Por outro lado, os valores de pH, as concentrações totais e as proporções molares dos ácidos graxos voláteis não foram influenciados pelos tratamentos, porém, para o ácido propiônico, houve efeito linear decrescente, sendo a maior proporção molar (12,06%) verificada no conteúdo cecal de coelhos alimentados com 23% de amido dietético. O milho-grão apresentou maior influência sobre a atividade microbiana cecal que o amido de milho purificado, porém, sem alterar o desempenho e rendimento de carcaça.

Animal performance and carcass characteristics of Nellore young bulls fed coated or uncoated urea slaughtered at different weights

The objective of this study was to evaluate animal performance and carcass characteristics of 64 Nellore young bulls at 22 months of age finished in a feedlot and slaughtered at five body weights (350; 455; 485; 555 and 580 kg) fed diets containing coated or uncoated urea. The experimental design adopted was completely randomized, set in a 4 × 2 factorial arrangement, and for the variables assessed in the control animals, it was 5 × 2. No effect of interaction between slaughter weights and diets were observed, so the variables were analyzed separately, compared by polynomial contrasts and by the F test, respectively. The time animals remained in the feedlot to reach slaughter weights was 66, 88, 145 and 194 days. Average daily gain (ADG) showed quadratic behavior, with a maximum of 1.44 kg/day with animals of 491.7 kg. Dry matter intake (DMI) (kg/day) was similar in all the treatments, but it decreased linearly as body weight increased. The bionutritional efficiency worsened linearly as body weight rose. The elevation in slaughter weight resulted in linear decrease in the percentage of beef round and increase in forequarter. Backfat thickness and rib eye area of the longissimus increased linearly and the percentages of muscle and protein in the carcass reduced and those of fat and ether extract increased linearly as body weight increased. Average daily gain, DMI, feed efficiency and carcass characteristics were not affected by diets containing coated or uncoated urea. However, animals fed coated urea presenter better crude fiber and neutral detergent fiber intake.

Composto orgânico na produção e qualidade de sementes de brócolis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Suprimento de potássio em função da adubação potássica residual em um Latossolo Vermelho do Cerrado

Em alguns solos com baixos teores de potássio trocável, formas não trocáveis participam do suprimento às plantas. Há evidências de que a disponibilização do K não trocável depende mais da demanda das plantas pelo nutriente do que das propriedades do solo. O objetivo deste trabalho foi avaliar o suprimento e a exaustão de formas de K em um Latossolo Vermelho do Cerrado em decorrência da adubação potássica residual e do cultivo de Brachiaria ruziziensis (Syn. Urochloa ruziziensis). Amostras de solos foram coletadas na camada de 0-20 cm, em parcelas de um experimento de campo em que a soja vinha sendo adubada anualmente, por 10 anos, com 0, 60, 120 e 180 kg ha-1 de K2O. em casa de vegetação, as amostras de solo receberam a aplicação de 0, 150 e 300 mg dm-3 de K e foram cultivadas com B. ruziziensis, com cinco cortes sucessivos. O suprimento de K às plantas dependeu mais do fertilizante recém-adicionado do que do efeito residual de adubações anteriores. O K não trocável foi responsável, ao longo do tempo, pela manutenção dos teores de K trocáveis e, na ausência de adubação potássica, constituiu a principal fonte de K para as plantas de B. ruziziensis. As plantas de B. ruziziensis possuem capacidade de extrair quantidade considerável de K do solo, confirmando sua importância como cultura de cobertura, na ciclagem do nutriente no solo.

Fenologia da aceroleira cv. Olivier em Junqueirópolis-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção e qualidade de couve-flor cultivar Teresópolis Gigante em função de doses de nitrogênio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological, biological and molecular characterization of three strains of Trypanosoma cruzi Chagas, 1909 (Kinetoplastida, Trypanosomatidae) isolated from Triatoma sordida (Stal) 1859 (Hemiptera, Reduviidae) and a domestic cat

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nanotechnology-based Drug Delivery Systems for Dermatomycosis Treatment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A discriminating dissolution method for glimepiride polymorphs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique

Thermal analysis has been extensively used to obtain information about drug-polymer interactions and to perform pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles of poly(D,L-lactide-co-glycolide) (PLGA) containing ciprofloxacin hydrochloride (CP) in various drug:polymer ratios were obtained by spray drying. The main purpose of this study was to investigate the effect of the spray drying process on the drug-polymer interactions and on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG) and infrared spectroscopy (IR). The results showed that the high levels of encapsulation efficiency were dependant on drug:polymer ratio. DSC and TG/DTG analyses showed that for physical mixtures of the microparticles components the thermal profiles were different from those signals obtained with the pure substances. Thermal analysis data disclosed that physical interaction between CP and PLGA in high temperatures had occurred. The DSC and TG profiles for drug-loaded microparticles were very similar to the physical mixtures of components and it was possible to characterize the thermal properties of microparticles according to drug content. These data indicated that the spray dryer technique does not affect the physicochemical properties of the microparticles. In addition, the results are in agreement with IR data analysis demonstrating that no significant chemical interaction occurs between CP and PLGA in both physical mixtures and microparticles. In conclusion, we have found that the spray drying procedure used in this work can be a secure methodology to produce CP-loaded microparticles. (C) 2007 Elsevier B.V. All rights reserved.

Effect of dietary phytase suplementation on the performance, bone densitometry, and phosphorus and nitrogen excretion of broilers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determination of the photoinduced birefringence and of the refractive index by Brewster method of epoxy resin doped with CdS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produtividade de feijoeiro de inverno submetido à dessecação com paraquat na pré-colheita

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Configurações de semeadura e produção e qualidade da fibra do algodoeiro

We evaluated, in two locations, production and fiber quality of cultivar IAC 23 cotton plants in ultra-narrow row, narrow row and conventional row spacing, varying number of plants by linear meter. Two experiments had been lead, one in Piracicaba - SP and another one in Campinas - SP, both in the crop year 2001/02. The experimental design was randomized blocks, in a factorial scheme, with 4 replications, being three spacing rows: 0.38m (ultra-narrow), 0.76m (narrow), and 0.95 m (conventional); and four densities (5, 8, 11, and 14 plants by linear meter). In Piracicaba, the production of cotton was 12% and 8,4 % superior in the ultra-narrow row and narrow row, respectively, when compared to the conventional row. In the ultra-narrow row in the smaller density of plants in the line, the production of cotton was 29.2% and 22.3% superior, respectively, to the productions of the narrow row and conventional row in the same number of plants in the line. The smaller spacing and higher plant density on the line, the smaller the number of bolls per plant at both locations. The agronomic characters of laboratory and the technological characteristics of the fiber were not modified by the populations of plants in the two studied environments.