Free activity in the cage associated with body weight and restoration of bone structural and mechanical properties in growing rats after hindlimb unloading

We investigated the importance of daily free activity in the cage and body weight gain during the recovering of bone structural and mechanical properties in growing rats after hindlimb unloading. Eight-week-old male Wistar rats were randomly divided into control (CG, n=24) and suspended (SG, n=24) groups. Animals from SG underwent a four-week hindlimb unloading period by tail-suspension. Animals from CG and those from SG after release were kept in collective cages and sacrificed at the age of 12, 16 and 20 weeks. Both femurs were removed and its area, bone mineral density (BMD), resistance to failure and stiffness were determined. Four-week hindlimb unloading decreased (p < 0.05) body weight (CG, 373.00 +/- 9.47 vs. SG, 295.86 +/- 9.19 g), BMD (CG, 0.19 +/- 0.01 vs. SG, 0.15 +/- 0.01 g/cm(2)), bone resistance to failure (CG, 147.75 +/- 5.05 vs. SG, 96.40 +/- 5.95 N) and stiffness (CG, 0.38 +/- 0.01 vs. SG, 0.23 +/- 0.02 N/m). Eight weeks of free activity in cage recovered (p > 0.05) the body weight (CG, 472.75 +/- 14.11 vs. SG, 444.75 +/- 18.91 g), BMD (CG, 0.24 +/- 0.01 vs. SG, 0.22 +/- 0.01 g/cm(2)), bone resistance to failure (CG, 195.73 +/- 10.06 vs. SG, 178.45 +/- 8.48 N) and stiffness (CG, 0.56 +/- 0.02 vs. SG, 0.47 +/- 0.03 N/m) of SG animals. Body weight correlated strongly with bone structural and mechanical properties (p < 0.0001). In conclusion, free activity in the cage associated with body weight gain restored bone structural and mechanical properties in growing rats after hindlimb unloading.

Anthropogenic influences on annual flux of cations and anions at meio stream basin, São Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribution of stream macroalgae in the eastern Atlantic Rainforest of São Paulo State, southeastern Brazil

Fifty-two stream segments were sampled from 16 August to 13 September in 1993 in the eastern Atlantic Rainforest of São Paulo State, southeastern Brazil (22°55′-25°00′S, 44°48′-48°03′W). Forty-two macroalgal subgeneric taxa were found and the most widespread species were Audouinella pygmaea (21% of sites), Compsopogon leptoclados and Microcoleus subtorulosus (19%). Macroalgal species number per sampling site ranged from 0 to six (2.6 ± 1.7) and was positively correlated to species abundance, whereas species cover ranged from 0 to 70% of the stream bed (15.5 ± 20.8%). No significant correlation was found among macroalgal species number and abundance with any physical or chemical variable analyzed. Most sites were dominated by one or few macroalgal species, mainly, Audouinella macrospora, C. leptoclados and M. subtorulosus. No significant difference was found between the frequency distribution of variables measured for streams and for total macroalgae but the most widespread species (A. pygmaea) differed significantly for current velocity, specific conductance, turbidity and pH. Overall means for macroalgal occurrence include the following values: temperature (X̄ = 19.9°C), current velocity (X̄ = 45 cm s-1), oxygen saturation (X̄ = 66%), specific conductance (X̄ = 59.6 μS cm-1), turbidity (X̄ = 5 NTU) and pH (X̄ = 7.1). This pattern of patchy distribution and dominance by few species has been suggested as typical of stream macroalgal communities and has been ascribed to the rapid fluctuation of physical and chemical conditions. Total macroalgal species richness as well as mean species number per sampling site were considerably lower than found in similar studies of other regions. The Intermediate Disturbance Hypothesis was applied to explain these results: the same factor (high precipitation) responsible for the maintainance of the high species diversity in the surrounding forest can be, paradoxically, a constraint to the development of a more diverse macroalgal flora in streams. © 1996 Kluwer Academic Publishers.

Discrete generator coordinate: Symmetry restoration in finite-dimensional spaces

Group theoretical-based techniques and fundamental results from number theory are used in order to allow for the construction of exact projectors in finite-dimensional spaces. These operators are shown to make use only of discrete variables, which play the role of discrete generator coordinates, and their application in the number symmetry restoration is carried out in a nuclear BCS wave function which explicitly violates that symmetry. © 1999 Published by Elsevier Science B.V. All rights reserved.

Phenology of a dioecious population of Batrachospermum delicatulum (Batrachospermales, Rhodophyta) in a stream from southeastern Brazil

The seasonal dynamics of a dioecious population of Batrachospermum delicatulum (Skuja) Necchi and Entwisle was evaluated biweekly during the growth period of the macroscopic gametophyte, from late autumn (May) to early spring (October) in a third-order stream from the northeast region of Sao Paulo State, southeastern Brazil (20°43'S, 49°13'W). The population fluctuated throughout the study period in terms of percentage cover, frequency and chlorophyll content. Percent cover and frequency showed a clear pattern with the lowest values at the initial and final stages of the growth period and the highest in July-August (winter). Gametophyte growth was associated with high illumination and low temperature, which agrees with most observations on Batrachospermales in stream environments. Relatively wide variations in reproductive characteristics were observed during the growth period, which were not correlated with percentage cover, frequency and chlorophyll content. The phenologic pattern observed in this population was characterized by a synchronic development of female/male plant ratio with the number of spermatangia per plant resulting in. (i) a higher proportion of fertilized (carposporophytic) plants associated with more male plants; (ii) higher fertilization rates during the periods with higher production of spermatangia per plant; and (iii) higher production of spermatangia per plant when the population had more male plants. These characteristics were largely associated with water temperature and ion content. In terms of reproductive success, the population studied can be regarded as highly efficient, considering the relatively low proportion of male to female plants and high fertilization rates. These data are consistent with a hypothesis to explain high fertilization rates in dioecious species in lotic habitats consisting of outcrossing among adjacent plants with intermingled male and female branches within an algal cluster. Efficient reproductive strategies have been reported in dioecious, monoecious and even mixed populations of B. delicatulum and can be interpreted as adaptations to successfully colonize streams with different characteristics.

Aesthetic posts and cores for metal-free restoration of endodontically treated teeth.

Utilization of contemporary post and core systems has facilitated the aesthetic restoration of endodontically treated teeth. Light transmission and biocompatibility have been enhanced by the introduction of metal-free post systems. The periodontal and endodontic status, root length, and histological structure of the devitalized teeth must be considered in order to achieve successful restoration following endodontic treatment. This article presents various restorative criteria for the aesthetic placement and buildup of post and core materials, as well as the preservation of maximum coronal and root structure.

Priority areas for riparian forest restoration in southeastern Brazil

Riparian forest restoration projects in the Tropics are complex, demanding longterm research, continuous human efforts and correct use of financial resources. This paper presents an approach to rank priority areas for riparian forest restoration on the upper section of the Pardo River watershed, in São Paulo, Brazil, using remote sensing and GIS techniques. Pardo River watershed is specially important, since it is the major source of drinking water supply for the region and water for domestic and industrial use within Botucatu and surrounding. Results indicated that riparian restoration should involve 81,27% of the protected area and could be made in three phases, allocating resources according to a priority scale.

Resistance to maxillary premolar fractures after restoration of class II preparations with resin composite or ceromer.

OBJECTIVE: The aim of this study was to evaluate the resistance to fracture of intact and restored human maxillary premolars. METHOD AND MATERIALS: Thirty noncarious human maxillary premolars, divided into three groups of 10, were submitted to mechanical tests to evaluate their resistance to fracture. Group 1 consisted of intact teeth. Teeth in group 2 received mesio-occlusodistal cavity preparations and were restored with direct resin composite restorations. Teeth in group 3 received mesio-occlusodistal cavity preparations and were restored with ceromer inlays placed with the indirect technique. After restoration, teeth were stored at 37 degrees C for 24 hours and then thermocycled for 500 cycles at temperatures of 5 degrees C and 55 degrees C. RESULTS: Statistical analysis revealed that group 3 (178.765 kgf) had a significantly greater maximum rupture load than did group 1 (120.040 kgf). There was no statistically significant difference between groups 1 and 2 or between groups 2 and 3. CONCLUSION: Class II cavity preparations restored with indirect ceromer inlays offered greater resistance to fracture than did intact teeth. The fracture resistance of teeth restored with resin composite was not significantly different from that of either the ceromer or intact teeth.

Effects of bleaching with carbamide peroxide gels on microhardness of restoration materials

The objective of this in vitro study was to quantitatively assess the effects of bleaching with 10 and 15% carbamide peroxide (CP) on restoration materials by performing superficial microhardness analysis. Acrylic cylindrical containers (4 x 2 mm) were filled with the following restoration products: Charisma (Heraues Kulzer, Vila Santa Catarina, São Paulo, Brazil), Durafill VS (Heraeus Kulzer), Vitremer (3M, Sumaré, São Paulo, Brazil), Dyract (Dentsply, Petrópolis, Rio de Janeiro, Brazil), and Permite C (SDI, São Pauio, São Paulo, Brazil). Sixty samples were prepared of each restoration material. Twenty samples received bleaching treatment with 10% CP, 20 samples received bleaching treatment with 15% CP, and 20 samples were kept submerged in artificial saliva, which was replaced daily. The treatment consisted of immersion of the specimens in 1 cm3 of CP at 10 and 15% for 6 hours per day during 3 weeks, whereupon the test specimens were washed, dried, and kept immersed in artificial saliva for 18 hours. Then the test and control specimens were analyzed using a microhardness gauge. The Knoop Hardness Number (KHN) was taken for each test and control specimen at five different locations by applying a 25 g force for 20 seconds. The values obtained were transformed into KHNs and the mean was calculated. The data were submitted to statistical analysis by analysis of variance and Tukey test, p < .05. The means/standard deviations were as follows: Charisma: CP 10% 38.52/4.08, CP 15% 34.31/6.13, saliva 37.36/4.48; Durafill VS: CP 10% 18.65/1.65, CP 15% 19.38/2.23, saliva 18.27/1.43; Dyract AP: CP 10% 30.26/2.81, CP 15% 28.64/5.44, saliva 33.88/3.46; Vitremer: CP 10% 28.15/3.04, CP 15% 17.40/3.11, saliva 40.93/4.18; and Permite C: CP 10% 183.50/27.09, CP 15% 159.45/5.78, saliva 215.80/26.15. A decrease in microhardness was observed for the materials Dyract AP, Vitremer, and Permite C after treatment with CP at 10 and 15%, whereas no effect on either of the two composites (Charisma and Durafill) was verified. CLINICAL SIGNIFICANCE: The application of the carbamide peroxide gels at 10 and 15% did not alter the microhardness of the composite resins Charisma and Durafill. In situ and clinical studies are necessary to enable one to conclude that the reduction in microhardness of the materials effectively results in clinical harm to the restorations.

SEM analysis of internal adaptation of adhesive restorations after contamination with saliva

Purpose: This study tested the null hypothesis that different treatments of saliva-contaminated substrate would not affect microgap formation at the dentin walls of bonded restorations. Materials and Methods: Forty freshly extracted human molars received standardized Class V preparations on buccal and lingual surfaces. The specimens were assigned to four experimental groups (n = 20): [G1] no contamination (control group), [G2] saliva contamination (10 s) after etching followed by 5 s air stream; [G3] saliva contamination after etching and rinsed for 10 s; and [G4] re-etching for 10 s after saliva contamination. All specimens were restored with a one-bottle adhesive (Single Bond, 3M ESPE) and microhybrid composite resin (Filtek Z250, 3M ESPE) according to the manufacturer's instructions. The specimens were thermocycled, sectioned through the center of the restoration, and then processed for SEM. Microgaps were measured at the axial wall at 1500X magnification. The data were submitted to Kruskal-Wallis nonparametric statistical analysis at p < 0.05. Results: The data revealed that different groups resulted in a statistically significant difference (p < 0.01) in gap formation. Air drying [G2] and rinsing [G3] the saliva-contaminated dentin resulted in similar microgap values (p > 0.05). However, re-etching the dentin after saliva contamination [G4] increased microgap formation (p < 0.05) when compared with the groups G1 and G2. Although air drying and rinsing produced results comparable to noncontaminated dentin, the presence of microgaps was not completely eliminated. Conclusion: Contaminated saliva did not prevent hybrid layer formation; however, it did reduce the adaptation of the restorative material to bonded surfaces.

Restoration of severely decayed primary incisors using indirect composite resin restoration technique

Caries of primary incisors is a common problem in paediatric dentistry in some countries. The restoration of primary incisors which have been severely damaged by early childhood caries or trauma is also a difficult challenge for clinicians. This case report describes an indirect technique for the restoration of primary anterior teeth using composite resin reinforced with a fibreglass post. Over a one-year period, the crowns have demonstrated good retention and aesthetic results. The restorations were provided in two short chair-side sections, with satisfactory patient cooperation. © 2005 BSPD and IAPD.

Ecology and morphological characterization of gametophyte and 'Chantransia' stages of Sirodotia huillensis (Batrachospermales, Rhodophyta) from a stream in central Mexico

The morphology and phenology of Sirodotia huillensis was evaluated seasonally in a central Mexican first-order calcareous stream. Water temperature was constant (24-25°C) and pH circumneutral to alkaline (6.7-7.9), and calcium and sulfates were the dominant ions. The gametophyte stages were characterized by the presence of a distinctive mucilaginous layer, a marked difference in phycocyanin to phycoerythrin ratio between female and male plants, and the presence of a carpogonia with a large trichogyne (>60 μm). Occasionally three capogonia were observed on a single basal cell. The 'Chantransia' stages were morphologically similar to those described for the other members of Batrachospermales. A remarkable observation was the formation of dome-shaped structures, consisting of prostrate filaments that are related with the development of new gametophytes. Chromosome numbers were n = 4 for fascicle cells, cortical filament cells and dome-shaped cells, and 2n = 8 for gonimoblast filament cells and 'Chantransia' stage filaments. Gametophytes and 'Chantransia' stages occurred in fast current velocities (60-170 cm/s) and shaded (33.1-121 μmol photons/m2/s) stream segments. The population fluctuated throughout the study period in terms of percentage cover and frequency: the 'Chantransia' stages were most abundant in the rainy season, whereas gametophytic plants had the highest frequency values during the dry season. These results were most likely a result of fluctuations in rainfall and related changes in current velocity. Some characteristics of this population can be viewed as probable adaptations to high current velocities: the mucilaginous layer around plants that reduces drag; potential increase in fertilization by the elongate and plentiful trichogynes and abundant dome-shaped structures producing several gametophytes.

Cytogenetic analysis of three sympatric Gymnotus species (Teleostei: Gymnotidae) from the Fundo Stream, MG, Brazil

Three sympatric species of Gymnotus from the Fundo stream, a small tributary of the Sapucai river, Minas Gerais State, Brazil, were studied in relation to their karyology. Gymnotus sylvius presented 2n=40 chromosomes (36 m/sm+4 st/a), Gymnotus sp. presented 2n=50 (26 m/sm+ 24 st/a) and Gymnotus paraguensis had 2n=54 (50 m/sm+4 st/a). C-banding demonstrated positively stained heterochromatic blocks in the centromeric position of few chromosomes on G. sylvius and in the centromeric region of all chromosomes on G. paraguensis samples. The nucleolus organizer region (NOR) was located on the short arm of one st chromosome pair in G. sylvius and Gymnotus sp., and in the interstitial position on the short arm of the pair number one and below the centromere on a third chromosome on G. paraguensis. The cytogenetic data obtained indicate that Gymnotus sp. represent a new Gymnotus specie with a karyotypic constitution never observed on others species from this genus. Some aspects related to the chromosome diversification of these Gymnotus are discussed. © 2007 The Japan Mendel Society.

In vitro evaluation of the precision of working casts for implant-supported restoration with multiple abutments

Objective: The purpose of this study was to compare the accuracy of two working cast fabrication techniques using strain-gauge analysis. Methods: Two working cast fabrication methods were evaluated. Based on a master model, 20 working casts were fabricated by means of an indirect impression technique using polyether after splinting the square transfer copings with acrylic resin. Specimens were assigned to 2 groups (n=10): Group A (GA): type IV dental stone was poured around the abutment analogs in the conventional way; Group B (GB), the dental stone was poured in two stages. Spacers were used over the abutment analogs (rubber tubes) and type IV dental stone was poured around the abutment analogs in the conventional way. After the stone had hardened completely, the spacers were removed and more stone was inserted in the spaces created. Six strain-gauges (Excel Ltd.), positioned in a cast bar, which was dimensionally accurate (perfect fit) to the master model, recorded the microstrains generated by each specimen. Data were analyzed statistically by the variance analysis (ANOVA) and Tukey's test (α= 5%). Results: The microstrain values (με) were (mean±SD): GA: 263.7±109.07με, and GB: 193.73±78.83με. Conclusion: There was no statistical difference between the two methods studied.

In vitro-evaluation of secondary caries formation around restoration.

The objective of this in vitro study was to evaluate demineralization around restorations. Class V preparations were made on the buccal and lingual surfaces of each tooth. TPH (Group 1), Fuji II LC (Group 2), Tetric (Group 3), Dyract (Group 4), GS 80 (Group 5) and Chelon Fil (Group 6) were randomly placed in equal numbers of teeth. The teeth were submitted to a pH-cycling model associated with a thermocycling model. Sections were made and the specimens were examined for the presence of demineralization under polarized light microscopy. Demineralization was significantly reduced with Chelon Fil (Group 6). Furthermore, a similar inhibitory effect on the development of demineralization was observed in Groups 2, 4 and 5.