Search for supersymmetry with gauge-mediated breaking in diphoton events at D0

We report the results of a search for supersymmetry (SUSY) with gauge-mediated breaking in the missing transverse energy distribution of inclusive diphoton events using 263 pb(-1) of data collected by the D0 experiment at the Fermilab Tevatron Collider in 2002-2004. No excess is observed above the background expected from standard model processes, and lower limits on the masses of the lightest neutralino and chargino of about 108 and 195 GeV, respectively, are set at the 95% confidence level. These are the most stringent limits to date for models with gauge-mediated SUSY breaking with a short-lived neutralino as the next-to-lightest SUSY particle.

Production of WZ events in pp(-) collisions at root s=1.96 TeV and limits on anomalous WWZ couplings

We present results from a search for WZ production with subsequent decay to l nu l'(l) over bar'(l and l' = e or mu) using 0.30 fb(-1) of data collected by the D0 experiment between 2002 and 2004 at the Fermilab Tevatron. Three events with WZ decay characteristics are observed. With an estimated background of 0.71 +/- 0.08 events, we measure the WZ production cross section to be 4.5(-2.6)(+3.8) pb, with a 95% C.L. upper limit of 13.3 pb. The 95% C.L. limits for anomalous WWZ couplings are found to be -2.0

Measurement of sigma(p(p)over-bar -> Z)center dot Br(Z ->tau tau) at root s=1.96 TeV

We present a measurement of the cross section for Z production times the branching fraction to tau leptons, sigma.Br(Z ->tau(+)tau(-)), in p (p) over bar collisions at root s=1.96 TeV in the channel in which one tau decays into mu nu(mu)nu(tau), and the other into hadrons+nu(tau) or e nu(e)nu(tau). The data sample corresponds to an integrated luminosity of 226 pb(-1) collected with the D0 detector at the Fermilab Tevatron collider. The final sample contains 2008 candidate events with an estimated background of 55%. From this we obtain sigma.Br(Z ->tau(+)tau(-)) = 237 +/- 15(stat)+/- 18(sys)+/- 15(lum)pb, in agreement with the standard model prediction.

Study Z gamma events and limits on anomalous ZZ gamma and Z gamma gamma couplings in pp(-) collisions at root s=1.96 Tev

We present a measurement of the Z gamma production cross section and limits on anomalous ZZ gamma and Z gamma gamma couplings for form-factor scales of Lambda=750 and 1000 GeV. The measurement is based on 138 (152) candidates in the ee gamma (mu mu gamma) final state using 320(290) pb(-1) of p (p) over bar collisions at root s=1.96 TeV. The 95% C.L. limits on real and imaginary parts of individual anomalous couplings are vertical bar h(10,30)(Z)vertical bar < 0.23, vertical bar h(20,40)(Z)vertical bar < 0.020, vertical bar h(10,30)(gamma)vertical bar < 0.23, and vertical bar h(20,40)(gamma)vertical bar < 0.019 for Lambda=1000 GeV.

Measurement of the lifetime difference in the B-s(0) system

We present a study of the decay B-s(0)-> J/psi phi. We obtain the CP-odd fraction in the final state at time zero R-perpendicular to = 0.16 +/- 0.10 (stat) +/- 0.02(syst), the average lifetime of the (B-s(0), (B) over bar (0)(s)) system, (tau) over bar (B-s(0)) = 1.39(-0.16)(+0.13)(stat)(-0.02)(+0.01)(syst) ps, and the relative width difference between the heavy and light mass eigen-states, Delta Gamma/(Gamma) over bar = (Gamma(L) - Gamma(H))/(Gamma) over bar = 0.24(-0.38)(+0.28)(stat)(-0.04)(+0.03)(syst). With the additional constraint from the world average of the B-s(0) lifetime measurements using semileptonic decays, we find (tau) over bar (B-s(0)) = 1.39 +/- 0.06 ps and Delta Gamma/(Gamma) over bar = 0.25(-0.15)(+0.14). For the ratio of the B-s(0) and B-0 lifetimes we obtain (tau) over bar (B-s(0))/tau(B-s(0)) = 0.91 +/- 0.09(stat) +/- 0.003(syst).

Search for excited muons in p(p)over-bar collisions at root s=1.96 TeV

We present the results of a search for the production of an excited state of the muon, mu(*), in proton antiproton collisions at root s =1.96 TeV. The data have been collected with the D0 experiment at the Fermilab Tevatron Collider and correspond to an integrated luminosity of approximately 380 pb(-1). We search for mu(*) in the process p (p) over bar ->mu(*)mu, with the mu(*) subsequently decaying to a muon plus photon. No excess above the standard model expectation is observed in data. Interpreting our data in the context of a model that describes mu(*) production by four-fermion contact interactions and mu(*) decay via electroweak processes, we set a 95% confidence level production cross section upper limit ranging from 0.057 to 0.112 pb, depending on the mass of the excited muon. Choosing the scale for contact interactions to be Lambda=1 TeV, excited muon masses below 618 GeV are excluded.

Direct limits on the B-s(0) oscillation frequency

We report results of a study of the B-s(0) oscillation frequency using a large sample of B-s(0) semileptonic decays corresponding to approximately 1 fb(-1) of integrated luminosity collected by the D0 experiment at the Fermilab Tevatron Collider in 2002-2006. The amplitude method gives a lower limit on the B-s(0) oscillation frequency at 14.8 ps(-1) at the 95% C.L. At Delta m(s)=19 ps(-1), the amplitude deviates from the hypothesis A=0 (1) by 2.5 (1.6) standard deviations, corresponding to a two-sided C.L. of 1% (10%). A likelihood scan over the oscillation frequency, Delta m(s), gives a most probable value of 19 ps(-1) and a range of 17

Measurement of the charge asymmetry in semileptonic B-s(0) decays

We have performed the first direct measurement of the time-integrated flavor untagged charge asymmetry in semileptonic B-s(0) decays A(SL)(s,unt) by comparing the decay rate of B-s(0) -> mu(+) D-s(-) nu X, where D-s(-) -> phi pi(-) and phi -> K+K-, with the charge-conjugate (B) over bar (0)(s) decay rate. This sample was selected from 1: 3 fb(-1) of data collected by the D0 experiment in run II of the Fermilab Tevatron collider. We obtain A(SL)(s,unt) = [1.23 +/- 0.97(stat) +/- 0.17(syst)] x 10(-2). Assuming that Delta m(s)/(Gamma) over bar (s) >> 1, this result can be translated into a measurement of the CP-violating phase in B-s(0) mixing: Delta Gamma(s)/Delta m(s) tan phi(s) = [2.45 +/- 1.93(stat) +/- 0.35(syst)] x 10(-2).

Lifetime difference and CP-violating phase in the B-s(0) system

From an analysis of the decay B-s(0)-> J/psi phi, we obtain the width difference between the light and heavy mass eigenstates Delta Gamma equivalent to(Gamma(L)-Gamma(H))=0.17 +/- 0.09(stat)+/- 0.02(syst) ps(-1) and the CP-violating phase phi(s)=-0.79 +/- 0.56(stat)(-0.01)(+0.14)(syst). Under the hypothesis of no CP violation (phi(s)equivalent to 0), we obtain 1/Gamma=tau/(B-s(0))=1.52 +/- 0.08(stat)(-0.03)(+0.01)(syst) ps and Delta Gamma=0.12(-0.10)(+0.08)(stat)+/- 0.02(syst) ps(-1). The data sample corresponds to an integrated luminosity of about 1.1 fb(-1) accumulated with the D0 detector at the Fermilab Tevatron collider. This is the first direct measurement of the CP-violating mixing phase in the B-s(0) system.

Search for techniparticles in e plus jets events at D0

We search for the technicolor process p(p) over bar ->rho(T)/omega(T)-> W pi(T) in events containing one electron and two jets, in data corresponding to an integrated luminosity of 390 pb(-1), recorded by the D0 experiment at the Fermilab Tevatron. Technicolor predicts that technipions pi(T) decay dominantly into b(b) over bar, b(c) over bar, or (b) over barc, depending on their charge. In these events b and c quarks are identified by their secondary decay vertices within jets. Two analysis methods based on topological variables are presented. Since no excess above the standard model prediction was found, the result is presented as an exclusion in the pi(T) vs rho(T) mass plane for a given set of model parameters.

Measurement of the ratios of the Z/gamma*+ >= n jet production cross sections to the total inclusive Z/gamma* cross section in p(p)over-bar collisions at root s=1.96 TeV

We present a study of events with Z bosons and associated jets produced at the Fermilab Tevatron collider in p p collisions at a center of mass energy of 1.96 TeV The data sample consists of nearly 14000 Z/gamma* -> e(+)e(-) candidates corresponding to an integrated luminosity of 0.4 fb(-1) collected with the D circle divide detector. Ratios of the Z/gamma*+ >= n jet cross sections to the total inclusive Z/gamma* cross section have been measured for n = 1-4 jets, and found to be in good agreement with a next-to-leading order QCD calculation and with a tree-level QCD prediction with parton shower simulation and hadronization. Published by Elsevier B.V

Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance

Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. The application of WC-Ni coatings in corrosive media is 14 not recommended due to the poor corrosion resistance of the (pure Ni) metallic matrix. It is well known that the addition of Cr to the metallic binder improves the corrosion properties. Erosion-corrosion performance of thermal spray coatings is widely influenced by ceramic phase composition, the size of ceramic particles and also the composition of the metallic binder. In the present work, two types of HVOF thermal spray coatings (Cr3C2-NiCr and WC-Ni) obtained with different spray conditions were studied and compared with conventional micro-cracked hard chromium coatings. Both as-sprayed and polished samples were tested under two erosion-corrosion conditions with different erosivity. Tungsten carbide coatings showed better performance under the most erosive condition, while chromium carbide coatings were superior under less erosive conditions. Some of the tungsten carbide coatings and hard chromium showed similar erosion-corrosion behaviour under more and less erosive conditions. The erosion-corrosion and electrochemical results showed that surface polishing improved the erosion-corrosion properties of the thermally sprayed coatings. The corrosion behaviour of the different coatings has been compared using Electrochemical Impedance Spectroscopy (EIS) and polarization curves. Total material loss due to erosion-corrosion was determined by weight loss measurements. An estimation of the corrosion contribution to the total weight loss was also given. (c) 2007 Elsevier B.V. All rights reserved.

Metallic powder injection molding using low pressure

The demand by high performance materials that have to support severe service conditions at a reasonable cost has been forcing the powder metallurgy to improve constantly. The most recent and more important innovation in the area is the process of powder injection.Powder injection molding (PIM) is a technology capable of producing a new range of components from powders. This advanced technology overcomes the existent limitations in the forming of products with complex geometry. The process presents countless variations which are used in the industry today. Invariably, it consists of mixing the powders and a thermo-plastic binder, injecting the mass in the mold in the wanted form, debinding, sintering and making optional secondary operations, as for example, machinery.The purpose of this work is to review the metal injection molding techniques and apply the low pressure injection molding process to family of parts using metallic powder with 10 mum particle size. This work also comments the design and construction of a low pressure injection machine and injection molds. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Stochastic scheduling - A flow shop no wait application and solutions

Minimizing the makespan of a flow-shop no-wait (FSNW) schedule where the processing times are randomly distributed is an important NP-Complete Combinatorial Optimization Problem. In spite of this, it can be found only in very few papers in the literature. By considering the Start Interval Concept, this problem can be formulated, in a practical way, in function of the probability of the success in preserve FSNW constraints for all tasks execution. With this formulation, for the particular case with 3 machines, this paper presents different heuristics solutions: by integrating local optimization steps with insertion procedures and by using genetic algorithms for search the solution space. Computational results and performance evaluations are commented. Copyright (C) 1998 IFAC.

Erbium- and ytterbium-doped sol-gel SiO2-HfO2 crack-free thick films onto silica on silicon substrate

Aware of the difficulties in applying sol-gel technology on the preparation of thin films suitable for optical devices, the present paper reports on the preparation of crack-free erbium- and ytterbium-doped silica: hafnia thick films onto silica on silicon. The film was obtained using a dispersion of silica-hafnia nanoparticles into a binder solution, spin-coating, regular thermal process and rapid thermal process. The used methodology has allowed a significant increase of the film thickness. Based on the presented results good optical-quality films with the required thickness for a fiber matching single mode waveguide were obtained using the erbium- and ytterbium-activated sol-gel silica:hafnia system. The prepared film supports two transversal electric modes at 1550 nm and the difference between the transversal electric mode and the transversal magnetic mode is very small, indicating low birefringence. Photoluminescence of the I-4(13/2) -> I-4(15/2) transition of erbium ions shows a broad band centered at 1.53 mu m with full width at a half maximum of 28 nm. Up-conversion emission was carried out under different pump laser powers, and just one transition at red region was observed. (c) 2006 Elsevier B.V. All rights reserved.