Eletrical conductivity and deterioration of soybean seeds exposed to different storage conditions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Germination of Albizia hassleri seeds at different temperatures, under laboratory conditions

The objective of this study was to analyze the germination of seeds of Albizia hassleri under different temperatures. A completely random design arranged as a split plot for temperatures regimes, with 11 seed lots and four replications of 15 seeds was used. The plot was represented by the various lots and the sub plots for different temperatures. The means were compared by Scott-Knott test at 5% probability. The temperatures used were: a) constant: 20, 25 and 30 degrees C, and b) alternating: 20-30 and 25-35 degrees C. For all 11 seed lots the mean germination was 90%, speed germination index (IVG) was 5.059, fresh matter of seedlings (MMF) was 0.0628 g and dry matter (MMS) 0.0499 g. The variation coefficient (CV) between plots ranged from 8.48% for germination to 51.71% for dry matter of seedlings and sub plot of 6.77% to 60.45% for germination and MMS. These high values of CV, tested for MMS and MMF, indicate low repeatability of results within each treatment. In general, the IVG obtained at temperatures of 20 and 25 degrees C was lower than those in temperatures of 30, 20-30 and 25-35 degrees C. The best temperature for IVG was the alternating 25-35 degrees C and constant 30 degrees C. The germination test can be conducted at 30, 20-30 and 25-35 degrees C for 19 days.

Electrical conductivity test in the evaluation of physiological quality in seeds of Zeyheria tuberculosa

The electrical conductivity test is still an excellent tool to evaluate the effect of seeds of various forest and agricultural species and recent studies have been conducted aiming at verifying its application in forest seeds. The objective of this study was to establish a specific methodology to test the electrical conductivity of forest seeds of Zeyheria tuberculosis. Four lots of seeds were used, which were submitted to the germination test, evaluating the percentage of germination, germination speed index and dry mass of seedlings. For the electrical conductivity test, five replicates of 20 seeds installed in three volumes of deionized water (75, 100 and 125 mL) were used and eight periods for seed imbibitions (2, 4, 6, 12, 18, 24, 48 and 72 hour) at 25 degrees C were allowed. The statistical design used was completely random; the comparison of means was performed by Tukey test at 5 % probability. Lot II showed higher germination percentage and speed. The electrical conductivity test allows discrimination of the same batch by the germination test under laboratory conditions. It was possible to separate the seed lot presenting better physiological quality (lot II) from among the other lots. It was recommended the use of 75 or 125 mL of deionized water at a temperature of 25 degrees C to perform the electrical conductivity test.

Efeito de épocas de colheita e período de repouso pós-colheita sobre as características físicas de frutos e sementes de mamoneira

This study aimed to assess the effect of harvesting times and of post-harvest resting period on physical characteristics of fruits and seeds of castor bean (AL Guarany 2002 genotype) and to verify if theses characteristics could be used to identify the ideal harvest time. Nine times of raceme harvest were assessed from 30 to the 142 days after anthesis (DAA) at fourteen days intervals, and four conditions of resting; (without and with seven days of resting period of seeds extracted (bare), from fruits and fixed to the racemes). It was evaluated water content, seed thickness, and length, width, and weight of fresh fruits and seeds, and seedling emergence in sand. The statistical design was completely randomized with four replications. The harvest times and the post-harvest rest period affected the physical characteristics of fruits and seeds of castor bean but none of these have proved to be effective in the identification of the ideal harvest time.

Mechanism and control of Genipa americana seed germination

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistance of stored bean varieties to Acanthoscelides obtectus (Coleoptera : Bruchidae)

During bean seed storage, yield can be lost due to infestations of Acanthoscelides obtectus Say, the bean weevil. The use of resistant varieties has shown promising results in fighting these insects, reducing infestation levels and eliminating chemical residues from the beans. The expression of resistance to A. obtectus in bean varieties is frequently attributed to the presence of phytohemagglutinins, protease inhibitors and alpha-amylase, and especially to variants of the protein arcelin, which reduce the larval viability of these insects. To evaluate the effect of bean seed storage time on the resistance expression of bean varieties to A. obtectus, tests with seeds of three ages (freshly-harvested, 4-month-old, and 8-month-old) were conducted in the laboratory, using four commercial varieties: Carioca Pitoco, Ipa 6, Porrillo 70, Onix; four improved varieties containing arcelin protein: Are. 1, Arc.2, Arc. 3, Arc.4; and three wild varieties also containing arcelin protein: Arc. IS, Arc.3S, and Arc. 5S. The Arc.5S, Arc. IS, and Arc.2 varieties expressed high antibiosis levels against the weevil; Arc. I and Arc3S expressed the same mechanism, but at lower levels. The occurrence of oviposition non-preference was also observed in Arc.5S and Arc. IS. The Arc.3 and Arc. 4 varieties expressed low feeding non-preference levels against A. obtectus. The expression of resistance in arcelin-bearing, wild or improved varieties was affected during the storage of seeds, and was high under some parameters but low in others. The results showed that addition of chemical resistance factors such as protein arcelin via genetic breeding may be beneficial in improving the performance of bean crops.

Silicon leaf application and physiological quality of white oat and wheat seeds

Plant nutrition can positively influence quality of seeds by improving plant tolerance to adverse climate. In this context, silicon is currently considered a micronutrient and it is beneficial to plant growth, especially Poaceaes such as white oat and wheat, thereby improving physiological quality of seeds. This study had the objective of evaluating the effects of silicon leaf application on plant tillering, silicon levels and physiological quality of white oat and wheat seeds besides establishing correlations between them. Two experiments were carried out in winter with white oat and wheat. The experimental design was the completely randomized block with eight replications. Treatments consisted of foliar application of silicon (0.8% of soluble silicon, as stabilized orthosilicic acid) and a control (with no application). Silicon levels in leaves were determined at flowering whereas the number of plants and panicles/spikes per area was counted right before harvest. Seed quality was evaluated right after harvest through mass, germination and vigor tests. Data was submitted to variance analysis and means were compared by the Tukey test at a probability level of 5%. Person's linear correlation test was performed among silicon level in plants, tillering and seed quality data. Silicon leaf application increases root and total length of white oat seedlings as an effect of higher Si level in leaves. Silicon leaf application increases mass of wheat seeds without affecting germination or vigor.

Phosphorus rates on yield and quality of lettuce seeds

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Using neural networks for estimation of aquifer dynamical behavior

The systems of water distribution from groundwater wells can be monitored using the changes observed on its dynamical behavior. In this paper, artificial neural networks are used to estimate the depth of the dynamical water level of groundwater wells in relation to water flow, operation time and rest time. Simulation results are presented to demonstrate the validity of the proposed approach. These results have shown that artificial neural networks can be effectively used for the identification and estimation of parameters related to systems of water distribution.

Fixed-time artificial insemination with estradiol and progesterone for Bos indicus cows I: Basis for development of protocols

Five experiments were conducted on commercial farms in Brazil aiming to develop a fixed-time artificial insemination (TAI) protocol that achieved pregnancy rates between 40% and 55% in Bos indicus cows. These studies resulted in the development of the following protocol: insertion of all intravaginal device containing 1.9 g of progesterone (CIDR) plus 2.0 mg im estradiol benzoate on Day 0; 12.5 mg im dinoprost tromethamine on Day 7 in cycling cows or oil Day 9 in anestrous cows; CIDR withdrawal plus 0.5 mg im estradiol cypionate plus temporary calf removal on Day 9; TAI (48 h after CIDR withdrawal) plus reuniting of calves with their dams on Day 11. Reduced dose of prostaglandin F(2 alpha) (PGF(2 alpha): 12.5 mg im dinoprost tromethamine) effectively caused luteolysis. In cycling cows, fertility was greater when the treatment with PGF(2 alpha) was administered on Day 7 than oil Day 9, but in anestrous cows, no effects of time of the PGF(2 alpha) treatment were found. Estradiol cypionate effectively replaced estradiol benzoate or gonadotropin-releasing hormone as the ovulatory stimulus, reducing labor and cost. In this protocol, CIDR inserts were successfully used four times (9 d each use) with no detrimental effects on fertility. (C) 2009 Elsevier B.V. All rights reserved.

Shortening of primary dentin etching time and its implication on bond strength

Objective. The aim of this study was to investigate the influence of shortening the etching time on the bond strength of a conventional and a self-etching primer adhesive system used in primary tooth dentin.Methods. Flat dentin surfaces were obtained from 24 primary molars, randomly assigned to 4 experimental groups. The adhesive systems Single Bond and Clearfil SE Bond were applied in two groups according to the manufacturers' recommendations. In the other two groups, the adhesives were applied after half-time of acid etching, 7 s for Single Bond and 10 s for Clearfil SE Primer. Resin crowns were built up and after 24 h storage in water at 37 ° C, the teeth were sectioned to produce beams with cross-sectional area of approximately 0.49 mm(2). Specimens were tested in tension at 0.5 mm/min until failure. Fractured specimens were analyzed to determine the failure mode.Results. Tensile bond strengths for Single Bond in primary dentin were higher than for Clearfil SE Bond. Shortening of acid etching time improved bond strength only for Single Bond, while no statistically significant difference was observed for Clearfil SE Bond when both etching times were compared.Significance. No detrimental effect on bond strength was observed when the time of acid etching was shortened in 50%. Shortening the time for a procedure in a small child without compromising the quality of the work is a very important finding for the practicing pediatric dentist. © 2004 Elsevier Ltd. All rights reserved.

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

Senna occidentalis Link. (Caesalpiniaceae) imbibition curves for NaCl osmotic potential levels up to 0.6 MPa

An investigation is reported on the statistical model of imbibition curves of the seeds of Senna occidentalis Link. (Caesalpiniaceae), up to Phase II (start of root emission) in osmotic potential levels (0; -0.2; -0.4 and -0.6 MPa), induced NaCl or PEG 6000. The statistical model for both solutions was y = a [1 b exp(-cx)] where y is the fresh matter of seed in g, and x the time of evaluation in h. The analysis of variance of the estimated parameters, showed that with the NaCl solution, the -0.4 and -0.6 MPa levels differed significantly from the 0 and -0.2 MPa levels, and that with the PEG solution, the -0.6 MPa differed from the rest. Prolongation of Phase II occurred as the potential decreased, with both solutions. More reduction in water uptake and prolongation of this phase occurred with the PEG treatment.

The development of seedlings from fragments of monoembryonic seeds as an important survival strategy for Eugenia (Myrtaceae) tree species

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Imbibition phases and germination response of Mimosa bimucronata (Fabaceae: Mimosoideae) to water submersion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)