Effects of betaine on the growth of the fish piauçu, Leporinus macrocephalus

Testamos o efeito da betaína na performance de crescimento do peixe piauçu. Para tal, 21 espécimes (média ± DP: peso corpóreo: 14,9 ± 1,3 g) foram distribuídos aleatoriamente em um entre três tratamentos (n = 7 cada; 1 peixe/aquário): ração sem acréscimo de betaína (controle), 3,6 g betaína/Kg de ração, 7,1 g betaína/Kg de ração. Os peixes foram submetidos às condições experimentais por 60 dias. Os peixes apresentaram crescimento estatisticamente significativo ao longo do experimento, porém nenhuma diferença estatística foi encontrada para qualquer parâmetro analisado, exceto para o fator de condição o qual foi maior no grupo controle do que nos grupos tratados com betaína. de acordo com isso, concluímos que a betaína não melhora o crescimento do piauçu.

Sex ratio and dynamic behavior in populations of the exotic blowfly Chrysomya albiceps (Diptera, Calliphoridae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Growth and reproductive dynamics of the South American red shrimp, Pleoticus muelleri (Crustacea: Solenoceridae), from the southeastern coast of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nanopore size growth and ultrafiltration performance of SnO2 ceramic membranes prepared by sol-gel route

Supported ceramic membranes have been produced by the sol-casting procedure from aqueous colloidal suspensions prepared by the sol-gel route. Coatings on a tubular alumina support have been successfully performed leading to crack free layers. Samples have been sintered at 400, 500 and 600 degreesC, and the effect of heating treatment on the nanostructure and on the ultrafiltration properties are analyzed. The characterization has been done by high resolution scanning electron microscopy, nitrogen adsorption-desorption isotherms, water permeation and cut-off determination using polyethylene glycol standard solutions. The micrographs have revealed that grains and pore size increase with the temperature, whereas their shape remains invariant. This results is in agreements with N-2 adsorption-desorption analyses, which have revealed that the mean pore size diameter increases from 4 to 10 nm as the sintering temperature increases from 400 to 600 degreesC, while the total porosity remains constant. Furthermore, the tortuosity, calculated from water permeability, is essentially invariant with the sintering temperatures. The membranes cut-off, determined with a retention rate equal to 95%, are 3500, 6500 and 9000 g . mol(-1) for 400, 500 and 600 degreesC, respectively, showing that the permeation properties of SnO2 ultrafiltration membranes can easily be controlled by sintering condition.

Electrochemical behavior of Ti-Mo alloys applied as biomaterial

Electrochemical investigation on the as-cast Ti-Mo alloys (4-20 Mo wt.%) applied as biomaterials in Na2SO4 and Ringer physiological solutions is reported. Analyses of the open-circuit potential indicated that all alloys present spontaneous passivation. SEM and cyclic voltammograms obtained in the Ringer solution showed that the samples studied do not present pitting corrosion at potentials up to 8 V (SCE), indicating high corrosion resistance. Open-circuit potential profiles of the anodic oxides growth in both solutions show that the presence of chloride ions during the anodization does not influence the oxides' chemical stability, and also clearly indicate that adding Mo to pure Ti improves the stability of the anodic oxides. All these results suggest Ti-Mo alloys promissory to be applied as biomaterials. (c) 2008 Elsevier Ltd. All rights reserved.

Improvement of fatigue resistance on La modified BiFeO(3) thin films

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

An efficient microwave-assisted hydrothermal synthesis of BaZrO3 microcrystals: growth mechanism and photoluminescence emissions

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Novel Aspects of the Purpose-Built Materials Strategy: Evidence of Topographic Template Effect and Oriented Attachment Growth Mechanism

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Note on the germination of Vochysia tucanorum seeds treated with growth regulators

(Nota sobre a germinação de sementes de Vochysia tucanorum tratadas com reguladores vegetais). O objetivo deste trabalho foi avaliar a resposta germinativa sob luz branca e escuro de sementes de Vochysia tucanorum Mart. tratadas com GA3 e CEPA. Sementes recém-coletadas de uma área de Cerrado foram armazenadas durante 14 dias em duas temperaturas (25 ± 2 °C e 7 ± 1 °C). Após o período de armazenamento, as sementes foram pré-tratadas com água destilada (controle), ácido giberélico (GA3), ácido 2-cloroetilfosfônico (CEPA) e uma mistura de GA3 + CEPA; em seguida, as sementes foram semeadas em placas de Petri sobre papel filtro umedecido com água destilada e colocadas para germinar em escuro e sob luz branca. Os resultados sugerem que as sementes não são fotoblásticas nem dormentes, no entanto um comportamento fotoblástico emerge quando as sementes foram previamente armazenadas em baixa temperatura e embebidas em soluções de GA3 e CEPA. em geral, não houve diferença entre as temperaturas de armazenamento de 7 °C e 25 °C. A germinação sob luz branca de sementes pré-tratadas com CEPA + GA3 e CEPA foi antecipada, em comparação com o controle de água destilada, sendo que o efeito da mistura CEPA + GA3 foi mais pronunciado do que o de CEPA sozinho. Assim, a taxa de germinação de sementes de V. tucanorum, sob luz branca, pode ser melhorada pela embebição das mesmas em soluções de CEPA ou de CEPA + GA3.

Fatigue life studies in carbon dual-phase steels

An investigation has been conducted to examine the morphological influence on fatigue life of low carbon steel with dual phase microstructure. The results showed that dual-phase microstructure, composed by ferrite and martensite had superior symmetrical bending fatigue strength when compared with ferrite-pearlite steel. Through those tests, evidences of different mechanisms were verified (such as ferrite cyclic hardening, slip band formation and beginning of crack nucleation and propagation). Based on the fatigue tests results, various mechanisms stages were discussed associated with different microstructure morphology. Copyright (C) 1996 Published by Elsevier B.V. Limited.

THERMOTOLERANCE BEHAVIOR IN SUGAR-CANE SYRUP FERMENTATIONS OF WILD-TYPE YEAST STRAINS SELECTED UNDER PRESSURES OF TEMPERATURE, HIGH SUGAR AND ADDED ETHANOL

The selected yeast strains were examined for their ability lo grow, to retain cell viability and to ferment diluted sugar cane juice (15% total sugar, w/v) to ethanol at 40-degrees-C. The degree of agitation (aeration) affects the thermotolerance while the method used for isolation of the strains appears to have no significant effect. The yeast isolated are aerobically fermentative with increased levels of fermentation and growth resulting from agitation (aeration), the exact level of these increases being dependent on the strain used.

Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy

The tendency of the aircraft industry is to enhance customer value by improving performance and reducing environmental impact. In view of availability, aluminum alloys have a historically tendency to faster insertion due to their lower manufacturing and operated production infrastructure. In landing gear components, wear and corrosion control of many components is accomplished by surface treatments of chrome electroplating on steel or anodizing of aluminum. One of the most interesting environmentally safer and cleaner alternatives for the replacement of hard chrome plating or anodizing is tungsten carbide thermal spray coating, applied by the high velocity oxy fuel (HVOF) process. However, it was observed that residual stresses originating from these coatings reduce the fatigue strength of a component.An effective process as shot peening treatment, considered to improve the fatigue strength, pushes the crack sources beneath the surface in most of medium and high cycle cases, due to the compressive residual stress field induced. The objective of this research is to evaluate a tungsten carbide cobalt (WC-Co) coating applied by the high velocity oxy fuel (HVOF) process, used to replace anodizing. Anodic films were grown on 7050-T7451 aluminum alloy by sulfuric acid anodizing, chromic acid anodizing and hard anodizing. The influence on axial fatigue strength of anodic films grown on the aluminum alloy surface is to degrade the stress-life performance of the base material. Three groups of specimens were prepared and tested in axial fatigue to obtain S-N curves: base material, base material coated by HVOF and base material shot peened and coated.Experimental results revealed increase in the fatigue strength of Al 7050-T7451 alloy associated with the WC 17% Co coating. on the other hand, a reduction in fatigue life occurred in the shot peened and coated condition. Scanning electron microscopy technique and optical microscopy were used to observe crack origin sites, thickness and coating/substrate adhesion. (c) 2007 Elsevier B.V. All rights reserved.

Testosterone stimulates growth and secretory activity of the female prostate in the adult gerbil (Meriones unguiculatus)

The prostate of the female gerbil (Meriones unguiculatus) is similar to the human female prostate (Skene gland) and, despite its reduced size, it is functional and shows secretory activity. However, virtually nothing is known about its physiological regulation. This study was thus undertaken to evaluate the behavior of the gerbil female prostate in a hyperandrogenic condition. Adult females received subcutaneous injections of testosterone cypionate (1 mg/kg body weight every 48 h) up to 21 days. Circulating levels of testosterone and estradiol were monitored, and the prostate and ovaries subjected to structural and immunocytochemical analyses. The treatment resulted in sustained high levels of circulating testosterone, and caused a transient increase in estradiol. There was an increase in epithelial cell proliferation accompanied by significant reorganization of the epithelium and an apparent reduction in secretory activity, followed by a progressive increase in luminal volume density and accumulation of secretory products. Immunocytochemistry identified the expression of androgen receptor and a prostate-specific antigen (PSA)-related antigen in prostatic epithelial cells. A circulating PSA-related antigen was also found, and its concentration showed strong negative correlation with circulating estrogen. Epithelial dysplasia was detected in the prostate of treated females. Analysis of the ovaries showed the occurrence of a polycystic condition and stromal cell hyperplasia. The results indicate that testosterone has a stimulatory effect on the female prostate, inducing epithelial cell proliferation, differentiation, secretory activity, and dysplasia. The results also suggest that prostatic growth and activity, polycystic ovaries, and ovarian stromal cell hyperplasia are related to a hyperandrogenic condition in females.

HETEROGENEOUS GROWTH IN THE NILE TILAPIA - SOCIAL STRESS AND CARBOHYDRATE-METABOLISM

Increase in heterogeneous growth as a result of grouping in the Nile tilapia, Oreochromis niloticus (L.), is presumed to be partially promoted by the social stress imposed by the dominant fish on the subordinates. Such stress may decrease the energy available for growth. In this study, the effect of social stress on carbohydrate metabolism was studied in adult, growing males. All animals were deprived of food during the experimentation period and pairing was imposed for either 2 or 4 days. Glycemia was measured before and after pairing, and muscle and liver glycogen contents were determined only after pairing. Subordinate fish showed the highest consumption of carbohydrate reserves. This response was caused by the social stress imposed which corroborates the idea that metabolic differences promoted by social stress may be involved in the rouping effect on heterogeneous growth in the Nile tilapia.

Small-angle X-ray scattering study of the smart thermo-optical behavior of zirconyl aqueous colloids

The smart thermo-optical systems studied here are based on the unusual thermoreversible sol-gel transition of zirconyl chloride aqueous solution modified by sulfuric acid in the molar ratio Zr/SO4:3/1. The transparency to the visible light changes during heating due to light scattering. This feature is related to the aggregates growth that occurs during gelation. These reversible changes can be controlled by the amount of chloride ions in solution. The thermoreversible sol-gel transition temperature increases from 323 to 343 K by decreasing the molar ratio Cl/Zr from 7.0 to 1.3. In this work the effect of the concentration of chloride ions on the structural characteristics of the system has been analyzed by in situ SAXS measurements during the sol-gel transition carried out at 323 and 333 K. The experimental SAXS curves of sols exhibit three regions at small, medium and high scattering vectors characteristics of Guinier, fractal and Porod regimes, respectively. The radius of primary particles, obtained from the crossover between the fractal and Porod regimes, remains almost invariable with the chloride concentration, and the value (4 Angstrom) is consistent with the size of the molecular precursor. During the sol-gel transition the aggregates grow with a fractal structure and the fractal dimensionality decreases from 2.4 to 1.8. This last value is characteristic of a cluster-cluster aggregation controlled by a diffusion process. Furthermore, the time exponent of aggregate growth presents values of 0.33 and 1, typical of diffusional and hydrodynamic motions. A crossover between these two regimes is observed.