MORPHOLOGIC AND MORPHOMETRIC ASPECTS OF ENOCYTES OF APIS-MELLIFERA QUEENS AND WORKERS IN DIFFERENT PHASES OF LIFE

Oenocytes of adult workers and queens of Apis mellifera L. were studied in different ages or life stages, by means of morphometric and histologic techniques. In workers, the oenocytes were found in the head, near the mandibles and in the abdomen, immersed in the parietal fat body mainly below the sterna, close to the wax glands. In queens, two populations of oenocytes different in size and localization were found within the parietal and visceral fat body, respectively. The oenocytes of workers and queens show the presence of acid lipids and acid phosphatase. The role of these cells in the castes differences is discussed.

UV-visible absorption characteristics of TEOS-derived and Cr-doped silica sonogels aged in different pH solutions and heat treated up to 600 degrees C

Cr-doped xerogels were obtained by sol-gel process from the acid-catalyzed and ultrasound-stimulated hydrolysis of tetraethoxysilane (TEOS) with addition of CrCl3.6H(2)O in water solution during the liquid step of the process. The gels were aged immersed in different pH solutions for about 30 days, after that they were allowed to dry. The samples were annealed at temperatures ranging from 40 to 600degreesC and analyzed by UV-visible absorption spectroscopy. Cr3+ is the preferable oxidation state of the chromium ion in the gels annealed up to 250-300degreesC, in the case of aging in solutions of pH=5 and 11. A high UV absorption below similar to320 nm, due to the host gel, and different absorption bands, depending on the temperature, due to the chromium ion were observed in the xerogels at temperatures below similar to250degreesC, in the case of aging in solutions of pH=1 and 2. These absorption bands have not been assigned. Above 300degreesC up to 600degreesC, Cr5+, and possibly Cr6+, are the preferable oxidation states of the chromium ion independent of the pH of the aging solution, so the xerogels turn to a yellowish appearance in all cases.

MORPHOLOGY AND WEIGHT OF AFRICANIZED QUEEN BEES PRODUCED IN DIFFERENT DIAMETERS OF ARTIFICIAL, CUPS

The present work showed that the newly emerged queen weight, the number of ovarioles. and the spermatheca mass are not influenced by the sizes of the wax cups. The first two characters suffered time transference influence, and the best acceptances were obtained mainly, in wax cups with diameters of 7, 8, and 9 min.

Production of yacon plantlet (Polymnia sonchifolia poep. et endl.) in different organic fertilization

The work was carried out in nursery of the Agronomical Science College (ASC) UNESP-Botucatu, in period from September 21(st) to October 31(st) 2000. The propagation material (rhizophores) was obtained from plants, which were cultivated in the area of ASC. The rhizophores were selected according to their vigor and size. Healthy rhizophores were chosen between 15 and 25 g, which were treated with benomil (0,6%, 10 minutes). As a basic commercial substratum Solomix((R)) was used with mixing cattle manure and chicken manure in the following proportions: T1- pure substratum; T2 - substratum + cattle manure (1:1), T3- substratum + cattle manure (2:1); T4- substratum + chicken manure (4:1). The yacon rhizophores presented good shoots in all substrata with exception of T4. For all parameters no significant difference between the pure commercial substratum and its mixture with cattle manure were observed; however, the addition the chicken manure in the studied proportions revealed harmful effect on the survival and development of the plantlets. The results indicated, that the viability of smaller size rhizophores was higher as the size conventionally used in Brazil (60 to 80 g).

Comparative sediment quality assessment in different littoral ecosystems from Spain (Gulf of Cadiz) and Brazil (Santos and Sao Vicente estuarine system)

The goal of this work was to establish comparisons among environmental degradation in different areas from Southern Spain (Gulf of Cadiz) and Brazil (Santos and Sao Vicente estuary), by using principal component analyses (PCA) to integrate sediment toxicity (amphipods mortality) and chemical-physical data (Zn, Cd, Pb; Cu, Ni, Co, V, PCBs, PAHs concentrations, OC and fines contents). The results of PCA extraction of Spanish data showed that Bay of Cadiz, CA-1 did not present contamination or degradation; CA-2 exhibited contamination by PCBs, however it was not related to the amphipods mortality. Ria of Huelva was the most impacted site, showing contamination caused principally by hydrocarbons, in HV-1 and HV-2, but heavy metals were also important contaminants at HV-1, HV-2 and HV-3. Algeciras Bay was considered as not degraded in GR-3 and -4, but in GR-3' high contamination by PAHs was found. In the Brazilian area, the most degraded sediments were found in the stations situated at the inner parts of the estuary (SSV-2, SSV-3, and SSV-4), followed by SSV-6, which is close to the Submarine Sewage Outfall of Santos - SSOS. Sediments from SSV-1 and SSV-5 did not present chemical contamination, organic contamination or significant amphipod mortality. The results, of this investigation showed that both countries present environmental degradation related to PAHs: in Spain, at Ria of Huelva and Gudarranque river's estuary areas; and in Brasil, in the internal portion of the Santos and Sao Vicente estuary. The same situation is found for heavy metals, since all of the identified metals are related to toxicity in the studied areas, with few exceptions (V for both Brazil and Spain, and Cd and Co for Brazilian areas). The contamination by PCBs is more serious for Santos and Sao Vicente estuary than for the investigated areas in Gulf of Cadiz, where such compound did not relate to the toxicity. (c) 2006 Elsevier Ltd. All rights reserved.

Piezoelectric properties of Bi4Ti3O12 thin films annealed in different atmospheres

Bismuth titanate (Bi4Ti3O12-BIT) films were evaluated for use as lead-free piezoelectric thin-films in micro-electromechanical systems. The films were grown by the polymeric precursor method on Pt/Ti/SiO2/Si (1 0 0) (Pt) bottom electrodes at 700 degrees C for 2 h in static air and oxygen atmospheres. The domain structure was investigated by piezoresponse force microscopy (PFM). Annealing in static air leads to better ferroelectric properties, higher remanent polarization, lower drive voltages and higher piezoelectric coefficient. on the other hand, oxygen atmosphere favors the imprint phenomenon and reduces the piezoelectric coefficient dramatically. Impedance data, represented by means of Nyquist diagrams, show a dramatic increase in the resistivity for the films annealed in static air atmopshere. (c) 2006 Elsevier Ltd. All rights reserved.

Corneal endothelial cell morphology of normal dogs in different ages

Endothelial cell function is essential to maintain corneal transparency, but unfortunately the regenerative capacity of the endothelium is limited. There are only a few reports describing the effect of age on morphologic appearance of corneal endothelial cells of dogs. Studies of normal corneal endothelial cells in humans and dogs have shown a decrease in endothelial cell density (ECD) and an increase in pleomorphism and polymegethism with advancing age. The purpose of this study was to investigate the effect of age on ECD and endothelial cell morphology in dogs. A total of 30 dogs were divided into three groups (10 dogs/group) based on age: group 1 (2-12 months old), group 2 (24-72 months old), and group 3 (84 months or older). Corneas were processed for light and scanning electron microscopy. Results showed only difference in cell density between group 1 and groups 2 and 3, showing an initial decrease in cell density as the animal matured. Whereas there was significantly greater variation in cell size within the dogs in group 3 than there was within the other two groups, suggesting that there was increased polymegethism and pleomorphism with advancing age.

Synthesis, structural refinement and optical behavior of CaTiO3 powders: A comparative study of processing in different furnaces

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)