Anticorpos contra o vírus rábico em seres humanos com atividades no Hospital Veterinário da Universidade Federal de Mato Grosso. Cuiabá, MT, Brasil

Uma caracterização do perfil sorológico de 102 indivíduos com constantes atividades no Hospital Veterinário da Universidade Federal de Mato Grosso foi realizada por meio de fichas epidemiológicas e provas sorológicas para titulação de anticorpos contra o vírus da raiva, no período de novembro de 1999 a novembro de 2000. Dessas pessoas, 27 tinham sido vacinadas em esquema de pré-exposição e 75 não tinham recebido nenhum esquema de vacinação anti-rábica. Os resultados deste estudo puderam classificar os indivíduos em diferentes grupos (G1, G2, G3 e G4). As 19 (18,6%) pessoas do grupo G1, previamente vacinadas contra raiva, apresentaram titulação abaixo de 0,5 UI/mL; no grupo G2, as 8 (7,8%) pessoas, também previamente vacinadas, apresentaram títulos superiores a 0,5UI/mL; no grupo G3, as 67 (65,6%) pessoas, não vacinadas contra o vírus rábico, apresentaram titulação abaixo de 0,5UI/mL; e finalmente no grupo G4, as 8 (7,8%) pessoas, que nunca receberam esquema vacinal, apresentaram títulos acima de 0,5UI/mL. Os resultados obtidos demonstraram que existe necessidade de avaliação epidemiológica e acompanhamento sorológico. de pessoas submetidas a vacinação anti-rábica pré-exposição em hospitais veterinários.

Composição química, digestibilidade dos nutrientes e da energia de diferentes milhetos (Pennisetum glaucum (L.) R. Brown) em suínos

Foram conduzidos dois ensaios de digestibilidade, objetivando-se estudar o valor nutricional de quatro diferentes milhetos (BN2, COMUM, IAPAR e IAPAR-REPASSE) processados em moinhos com três tipos de peneiras (diâmetros de furo de 3, 2 e 1 mm). Os coeficientes de digestibilidade (CD) da energia bruta (CDEB) e o coeficiente de metabolizabilidade (CM) da energia bruta (CMEB) relativos à peneira de 3 mm foram: 63,09 e 61,20% (COMUM); 71,57 e 69,66% (IAPAR) e 67,39 e 65,60% (BN2). Os CD e CM da energia do COMUM foram inferiores ao IAPAR e ambos foram semelhantes ao BN2. O IAPAR-REPASSE apresentou CDEB de 70,62% e CMEB de 68,49%, semelhante ao IAPAR. O IAPAR-1 mm apresentou maior CDEB e CMEB (84,61 e 81,41%) que o IAPAR-3 mm (70,59 e 68,71%) e o IAPAR-2 mm (77,73 e 75,46%). Os valores de energia digestível (ED) e energia metabolizável (EM) para o IAPAR (3 mm) foram de 3.030 kcal/kg e 3.001 kcal/kg, respectivamente. Verificou-se ED de 3.083 e 3.355 kcal/kg e em de 2.993 e 3.228 kcal/kg para o IAPAR (2 e 1 mm). O IAPAR-REPASSE apresentou valores de 2.849 kcal/kg (ED) e 2.763 kcal/kg (EM), enquanto o COMUM (3 e 2 mm), de 2.574 e 3.022 kcal/kg (ED) e 2.497 e 2.932 kcal/kg (EM), e o BN2 (3 e 2 mm), de 2.692 e 3.047 kcal/kg (ED) e 2.620 e 2.966 kcal/kg (EM). As diferentes variedades de milheto apresentaram variações em sua composição química que resultaram em diferenças no valor nutricional, sendo o milheto IAPAR o que apresentou melhor valor, seguido pelo BN2 e o COMUM.

Synthesis and sintering of PZT ceramics

Lead zirconate powder, with Zr/Ti ratio of 50/50 was prepared by polymeric precursor method and doped with 3, 5 and 7 mol% of Sr+2 Or Ba+2, as well as by 0.2 to 5 mol% of Nb+5. The powder was calcined at 750 degrees C by 4 hours and milled during 1.5 h in isopropilic alcohol. Powders were characterized by surface area measurements (BET method), by infrared spectroscopy and by X-ray diffraction to characterize the crystal structure. Isostatically pressed samples were sintered in a dilatometer furnace by using a constant heating rate of 10 degrees C/min from ambient to 1200 degrees C. Synthetic air and air with water vapor were used as atmospheres. Both Sr+2 and Ba+2 substitute Pb+2 and favor the formation of rhombohedral phase. Otherwise, Nb+5 substitute preferentially Zr+4 favoring tetragonal phase. The concentration of dopants and the atmosphere influence the densification and the microstructure of the PZT, which alters the dielectric and piezoelectric properties of the ceramics.

Study of stress distribution with finite element method in a root with prefabricated threaded split shaft post - Part I

A finite element analysis was carried out to study the role of prefabricated threaded split shaft post (Flexi-Post) on dentinal stress in pulpless tooth. Three dimensional plane strain model of mesio-distal section of a human maxillary central incisor without restoration was analysed with the MSC/NASTRAN (MacNeal/ Schwendler) general purpose finite analysis program was executed on a microcomputer. The model as discretized into 48.954 axisymmetric finite elements defined by 10.355 nodes. Each element was assigned unique elastic properties to represent the materials modeled. Homogeneity, isotropy and linear elasticity were assume for all material. A simulation of static load of 100N was applied to the incisal edge of the post; vertical. Maximal principal stresses and von Mises equivalent stress were calculated. Using the element analysis model employed in this study, the following can be concluded concerning threaded split shaft post (Flexi-Post): Maximum principal stresses in dentin were located at cervical place and at the post apex. The apical threads of the post not redirecting stresses away from the root.

Botryoidal platinum, palladium and potarite from the Bom Sucesso stream, Minas Gerais, Brazil: Compositional zoning and origin

Platinum-Pd nuggets from the Born Sucesso stream alluvium Minas Gerais, Brazil. have been investigated by electron-probe microanalysis. The nuggets attain 1 mm in maximum dimension and have a botryoidal habit, with pronounced compositional core-to-margin zoning of internal structures, Although there is a wide variation in internal morphology and individual zones vary markedly in thickness (<1-100 mum), a typical composite arborescent nugget comprises a broad irregular core region of massive auriferous Pd-Hg alloy (potarite delta-PdHg) or cavity space + relict potarite enclosed by a narrow zone of platiniferous, palladium or alloy of near Pt50Pd50 composition, and is progressively oscillatory zoned by palladian platinum, with growth eventually enveloping the whole botryoidal colony, to a narrow rim of palladian platinum or pure platinum. Other nuggets comprise an arborescent to dendritic core of auriferous potarite, a broad internal zone of either pure platinum or palladian platinum, and a narrow rim of platinum, the mineral palladium contains up to about 65 at.% Pd; this is the first detailed modern confirmation of palladium in its type locality. Auriferous potarite ranges in composition from similar toPd(3)Hg(2) to near Pd(Hg,Au). The origin of these nuggets remains unclear, but their mineralogy is broadly equivalent to that of palladian gold. potarite and platinum in alluvial sediments and overburden from Devon, England, which are considered to be detrital, and their platinum-group-clement geochemistry is consistent with precipitation from hydrothermal fluids. We suggest that the Bom Sucesso nuggets resulted from high-level episodic hydrothermal alteration of mafic and ultramafic rocks within the drainage basin, with the remobilized Pt and Pd precipitated in open spaces in the enclosing metaquartzites.

Kramers equation for a charged Brownian particle: the exact solution

We report the exact fundamental solution for Kramers equation associated to a Brownian gas of charged particles, under the influence of homogeneous (spatially uniform) otherwise arbitrary, external mechanical, electrical and magnetic fields. Some applications are presented, namely the hydrothermodynamical picture for Brownian motion in the long-time regime. (c) 2005 Elsevier B.V. All rights reserved.

The Pediatric Rheumatology International Trials Organization American-College-of-Rheumatology provisional criteria for the evaluation of response to therapy in juvenile systemic lupus erythematosus: Prospective validation of the definition of improvement

Objective. To use the Pediatric Rheumatology International Trials Organization (PRINTO) core set of outcome measures to develop a validated definition of improvement for the evaluation of response to therapy in juvenile systemic lupus erythematosus (SLE).Methods. Thirty-seven experienced pediatric rheumatologists from 27 countries, each of whom had specific experience in the assessment of juvenile SLE patients, achieved consensus on 128 patient profiles as being clinically improved or not improved. Using the physicians' consensus ratings as the gold standard measure, the chi-square, sensitivity, specificity, false-positive and false-negative rates, area under the receiver operating characteristic curve, and kappa level of agreement for 597 candidate definitions of improvement were calculated. Only definitions with a kappa value greater than 0.7 were retained. The top definitions were selected based on the product of the content validity score multiplied by its kappa statistic.Results. The definition of improvement with the highest final score was at least 50% improvement from baseline in any 2 of the 5 core set measures, with no more than 1 of the remaining worsening by more than 30%.Conclusion. PRINTO proposes a valid and reproducible definition of improvement that reflects well the consensus rating of experienced clinicians and that incorporates clinically meaningful change in core set measures in a composite end point for the evaluation of global response to therapy in patients with juvenile SLE. The definition is now proposed for use in juvenile SLE clinical trials and may help physicians to decide whether a child with SLE responded adequately to therapy.

Photoluminescence in amorphous zirconium titanate

Photoluminescence at room temperature was observed in amorphous zirconium titanate obtained from the polymeric precursor method. This was the first time in which PL was noticed in an amorphous compound made of two network formers. The PL spectra could be deconvoluted into two bands, whose center 1 was located from 540 nm to 552 nm and center 2 from 625 nm to 641 nm. The co-existence of fivefold and sixfold oxygen coordination of titanium and/or zirconium could be the origin of the radiative recombination of electron-hole pairs in amorphous ZT, which may be responsible for the emission of the photoluminescence.

LAMINAR THERMALLY DEVELOPING FLOW INSIDE RIGHT-ANGULARLY TRIANGULAR DUCTS

An analytical approach based on the generalized integral transform technique is presented, for the solution of laminar forced convection within the thermal entry region of ducts with arbitrarily shaped cross-sections. The analysis is illustrated through consideration of a right triangular duct subjected to constant wall temperature boundary condition. Critical comparisons are made with results available in the literature, from direct numerical approaches. Numerical results for dimensionless average temperature and Nusselt numbers are presented for different apex angles.

Qualidade da água para a irrigação de plantas em viveiros: utilização de descargas elétricas sem efeito térmico e de campos de energia no controle de Meloidogyne incognita Raça 1

The effect of electrical discharges without thermic effect and of energy field on Meloidogyne incognita Rara 1 larvae elimination in weir water was tested. on an average, 63,22% of larvae were killed by electrical discharges, in comparison with 53,12% of dead larvae in the control (water that received only ammonium sulphate) as an electrolyte. Water exposed to energy fields presented higher percentages of dead larvae (50,01% for electromagnetic field, 43,78% for variable electric field and 40,48% for static electric field) in comparison with control, represented by water without exposition to any energy field and without ammonium sulphate (34,27%).

Determination of selenium in nutritionally relevant foods by graphite furnace atomic absorption spectrometry using arsenic as internal standard

A method has been developed for the direct determination of Se in nutritionally relevant foods by graphite furnace atomic absorption spectrometry. Tungsten/rhodium carbide coating on the integrated platform of a transversely heated graphite atomizer or W coating with co-injection of Pd(NO3)(2) were used as a permanent modifiers. Samples and reference solutions were spiked with 500 mu g L-1 As and absorbance variations due to changes in experimental conditions were minimized. For 20 mu L aqueous analytical solutions delivered into the graphite tube, analytical curves in the 5.0-40 mu g L-1 with good linear correlation were established. Pyrolysis and atomization temperatures were evaluated using pyrolysis and atomization curves, respectively. The optimized heating program (temperature, ramp time, hold time) of the graphite tube of the Perkin-Elmer SIMAA 6000 atomic absorption spectrometer was: dry steps (110 degrees C, 5 s, 10 s; 130 degrees C, 15 s, 15 s); air-assisted pyrolysis step (600 degrees C, 20 s, 40 s; 20 degrees C, 1 s, 40 s); pyrolysis step (1300 degrees C, 10 s, 20 s); atomization step (2100 degrees C, 0 s, 4 s); clean step (2550 degrees C, 1 s, 5 s). The method was applied for Se determination in coconut water, coconut milk, soybean milk, cow milk, tomato juice, mango juice, grape juice and drinking water samples and four standard reference materials and results were in agreement at 95% confidence level. The lifetime of the tube was 500 firings and the relative standard deviations of measurements of typical samples containing 25 mu gL(-1) Se were 3.0% and 6.0% (n = 12) with and without internal standardization, respectively. The limits of detection were in the 0.35 mu g L-1-0.7 mu g Se L-1 range. The accuracy of the proposed method was evaluated by an addition-recovery experiment and all recovered values were in the 98-109% range. (c) 2004 Elsevier Ltd. All rights reserved.

On the denominator values and barycentric weights of rational interpolants

We improve upon the method of Zhu and Zhu [A method for directly finding the denominator values of rational interpolants, J. Comput. Appl. Math. 148 (2002) 341-348] for finding the denominator values of rational interpolants, reducing considerably the number of arithmetical operations required for their computation. In a second stage, we determine the points (if existent) which can be discarded from the rational interpolation problem. Furthermore, when the interpolant has a linear denominator, we obtain a formula for the barycentric weights which is simpler than the one found by Berrut and Mittelmann [Matrices for the direct determination of the barycentric weights of rational interpolation, J. Comput. Appl. Math. 78 (1997) 355-370]. Subsequently, we give a necessary and sufficient condition for the rational interpolant to have a pole. (c) 2006 Elsevier B.V. All rights reserved.

The role of organic matter on the adsorption of mercury in sediments from Amazon lakes, Brazil

Gold has been exploited intensively in the Brazilian Amazon during the past 20 years, and the elemental mercury (Hg) used in amalgamating the gold has caused abnormal Hg concentrations in waterways. Since 1986 particular attention has been given to the Madeira River because it is the largest tributary of the Amazon River and gold mining was officially allowed on a 350-km sector of the river. In this paper, samples of sediments from nine lakes located in the Madeira River basin, Rondonia State, Brazil, were analysed for mercury and organic matter. The average Hg content ranged between 33 and 157 ppb, which is about 8-40 times higher than the average value corresponding to 4.4 ppb for rocks occurring in the area (regional background). Significant correlation was found between the Hg content and organic matter in the sediments, indicating its importance on the retention of this heavy metal.