Estudo de sobrevivência de uma coorte de pessoas de 60 anos e mais no município de Botucatu (SP) - Brasil

O aumento proporcional do número de idosos na população tem motivado estudos no sentido de melhorar a qualidade de vida desta faixa etária através de políticas sociais e, entre elas, o planejamento em saúde. Com o objetivo de conhecer riscos de mortalidade para a população de sessenta anos e mais, um estudo de sobrevida foi realizado rastreando, no ano de 1992, os idosos participantes de um inquérito de morbidade referida realizado na cidade de Botucatu em 1983/84. Foram localizados 89,6% destes idosos. Curvas de sobrevivência foram calculadas com o método de Kaplan-Meier e a análise de riscos, utilizando-se a Regressão Múltipla de Cox ajustando-se o modelo agregando as variáveis por blocos. Para o sexo masculino foram encontradas associadas, independentemente, ao aumento da mortalidade as seguintes categorias de variáveis: idade de 70 anos e mais: Hazard Ratio (HR)=2,4 (1,6 - 3,7); salário menor que um salário mínimo: HR=2,2 (1,3 - 3,8); ter outras rendas: HR=2,2 (1,3 - 3,9); ser o chefe da família ou seu cônjuge: HR=2,3 (1,2 - 2,4); referência de doenças do aparelho circulatório: HR=1,6 (1,1 - 2,4); referência de diabetes mellitus: HR=3,0 (1,3 - 7,0). Para o sexo feminino, foram encontradas associadas a idade de 70 anos e mais: HR=4,6 (3,0 - 7,1); referência de diabetes mellitus: HR=3,0 (1,7-5,3) e ter outras rendas: HR=2,0 (1,1 - 4,0).

Desempenho de bezerros da raça Nelore e cruzados desmamados recebendo concentrado em pastagem adubada de Cynodon dactylon cv. Coastcross

Em três anos de pesquisa, avaliou-se o desempenho de bezerros desmamados de quatro grupos genéticos (Nelore; Canchim × Nelore; Angus × Nelore; e Simental × Nelore) em pastagem de Cynodon dactylon, cv. Coastcross, adubada, sob manejo rotacionado, recebendo mistura mineral ou concentrado. O concentrado foi fornecido na quantidade de 3 kg/animal/dia e continha 18,8% de proteína bruta e 81,5% de nutrientes digestíveis totais na matéria seca. A quantidade de forragem disponível diferiu com a utilização de mistura mineral e concentrado (2.961 kg e 3.383 kg de matéria seca (MS) por hectare, respectivamente). A oferta de MS/animal/dia foi 9,9 kg/dia (3,9% PV) para mistura mineral e 9,0 kg/dia (3,3% PV) para concentrado. A forragem disponível possuía, na matéria seca, 13,6% de proteína bruta, 79,8% de fibra em detergente neutro; 62,3% de digestibilidade in vitro da matéria seca, 3,9 g/kg de cálcio, 2,0 g/kg magnésio, 2,5 g/kg de fósforo, 22,7 g/kg de potássio, 2,8 g/kg de enxofre, 9,9 mg/kg de cobre, 22,5 mg/kg de zinco, 98 mg/kg de manganês e 188 mg/kg de ferro. Foram observadas interações grupo genético × suplementação e ano × suplementação para ganho diário de peso e taxa de lotação das pastagens e ciclo de pastejo × suplementação para a taxa de lotação. O ganho diário de peso nos animais Nelore, Canchim × Nelore, Angus × Nelore e Simental × Nelore criados com suplementação do pasto com mistura mineral foi de 0,48; 0,63; 0,68 e 0,50 kg, enquanto naqueles que receberam concentrado foi de 0,87; 0,95; 0,99 e 0,95 kg, respectivamente. As médias estimadas das taxas de lotação das pastagens foram 6,1 para todos os grupos genéticos que receberam mistura mineral e 7,5; 7,6; 8,8 e 9,0 unidades animais/ha para os grupos genéticos Nelore, Canchim × Nelore, Angus × Nelore e Simental × Nelore que receberam concentrado, respectivamente. O grupo genético influencia o desempenho de bovinos em pastagem de capim-coastcross e interage com a suplementação com concentrado.

Efficacy and safety of a soy isoflavone extract in postmenopausal women: A randomized, double-blind, and placebo-controlled study

Objective: To investigate the efficacy of soy isoflavone on climacteric symptoms in postmenopausal women.Design: In this double-blind, randomized, placebo-controlled study, a total of 80 women (mean age =55.1 years), who reported 5 or more hot flush episodes per day, were randomized to receive either 250 mg of standardized soy extract (Glycine max AT) a total of 100 mg/day of isoflavone (n=40) or placebo (n=40). Exclusion criteria included: contra-indication for hormone therapy (HT), chronic gastrointestinal diseases, and users of HT within the preceding 6-months. For 10-months, climacteric symptoms were evaluated using a score card and the menopausal Kupperman index. Compliance and safety were also assessed. At baseline and the end of the study, lipid and hormonal profiles, as well as vaginal, mammographic and ultrasonographic parameters were measured. The t-test, Wilcoxon test and ANOVA were used in the statistical analysis.Results: At baseline, the mean number of hot flushes was 9.6 +/- 3.9 per day in the isoflavone group and 10.1 +/- 4.9 in the placebo group (p>0.05). After 10 months, there was a significant reduction in frequency of hot flushes among isoflavone users when compared to those on placebo (3.1 +/- 2.3 and 5.9 +/- 4.3, respectively) (p<0.001). Kupperman index mean values showed a significant reduction in both groups. However, soy isoflavone was significantly superior to placebo, in reducing hot flush severity (69.9% and 33.7%, respectively) (p<0.001). Endometrial thickness, mammography, vaginal cytology, lipids and hormonal profile did not change in both groups. No serious adverse event related to isoflavone treatment was reported.Conclusions: the soy isoflavone extract exerted favorable effects on vasomotor symptoms and good compliance, providing a safe and effective alternative therapeutic for postmenopausal women. (C) 2007 Elsevier B.V.. All rights reserved.

Cadinane sesquiterpenoids of Phomopsis cassiae, an endophytic fungus associated with Cassia spectabilis (Leguminosae)

Five cadinane sesquiterpenes derivatives were isolated by bioassay-guided fractionation from Phomopis cassiae, an endophytic fungus isolated from Cassia spectabilis. The structures of the two diastereoisomeric 3,9,12-trihydroxycalamenenes (1, 2); 3,12-dihydroxycalamenene (3); 3,12-dihydroxycadalene (4) and 3,11,12-trihydroxycadalene (5) were established on the basis of analyses of ID and 2D NMR and HRTOFMS experiments. Antifungal activity of the isolates was evaluated against Cladosporium sphaerospermum and Cladosporium cladosporioides, revealing 5 as the most active compound. (c) 2006 Elsevier Ltd. All rights reserved.

Simulation of within field variability of corn yield with Ceres-Maize model

The CERES-Maize model was used to estimate the spatial variability in corn (Zea mays L.) yield for 1995 and 1996 using data measured on soil profiles located on a 30.5 m grid within a 3.9 ha field in Michigan. The model was calibrated for one grid profile for the 1995 and then used to simulate corn yield for all grid points for the 2 yrs. For the calibration for 1995, the model predicted corn yield within 2%. For 1995, the model predicted yield variability very well (r(2) = 0.85), producing similar yield maps with differences generally within +/- 300 kg ha(-1). For 1996, the model predicted low grain yields (1167 kg ha(-1)) compared with measured (8928 kg ha(-1)) because the model does not account for horizontal water movement within the landscape or water contributions from a water table. Under nonlimiting water conditions, the model performed well (average of 8717 vs. 8948 kg ha(-1)) but under-estimated the measured yield variability.

Cathodic stripping voltammetric determination of cefaclor in pharmaceutical formulations

A sensitive method is described for the determination of cefaclor by cathodic stripping voltammetry at the hanging mercury drop electrode. cefaclor is accumulated at the electrode surface as a mercury salt, which is reduced at -0.67 V. The optimum accumulation potential and accumulation time were +0.15 V and up to 180 s, respectively. Linear calibration graphs were obtained between 3.9 mu g.L-1 to 39 mu g.L-1 and the limit of determination was evaluated to be 1.9 mu g.L-1. The method was applied successfully to the determination of cefaclor in pharmaceutical formulations.

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (GroBes Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.0 1 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriarnine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that > 100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content). (C) 2002 Elsevier B.V. B.V. All rights reserved.

On a control of a non-ideal mono-rail system with periodics coefficients

In this work, the problem in the loads transport (in platforms or suspended by cables) it is considered. The system in subject is composed for mono-rail system and was modeled through the system: inverted pendulum, car and motor and the movement equations were obtained through the Lagrange equations. In the model, was considered the interaction among of the motor and system dynamics for several potencies motor, that is, the case studied is denominated a non-ideal periodic problem. The non-ideal periodic problem dynamics was analyzed, qualitatively, through the comparison of the stability diagrams, numerically obtained, for several motor torque constants. Furthermore, one was made it analyzes quantitative of the problem through the analysis of the Floquet multipliers. Finally, the non-ideal problem was controlled. The method that was used for analysis and control of non-ideal periodic systems is based on the Chebyshev polynomial expansion, in the Picard iterative method and in the Lyapunov-Floquet transformation (L-F trans formation). This method was presented recently in [3-9].

Postsurgical stability of oropharyngeal airway changes following counter-clockwise maxillo-mandibular advancement surgery

Purpose: This study evaluated oropharyngeal airway changes and stability following surgical counter-clockwise rotation and advancement of the maxillo-mandibular complex.Methods and Patients: Fifty-six adults (48 females, 8 males), between 15 and 51 years of age, were treated with Le Fort I osteotomies and bilateral mandibular ramus sagittal split osteotomies to advance the maxillo-mandibular complex with a counter-clockwise rotation. The average postsurgical follow-up was 34 months. Each patient's lateral cephalograms were traced, digitized twice, and averaged to estimate Surgical changes (T2-T1) and Postsurgical changes (T3-T2).Results: During surgery, the occlusal plane angle decreased significantly (8.6 +/- 5.8 degrees) and the maxillo-mandibular complex advanced and rotated counter-clock-wise. The maxilla moved forward (2.4 +/- 2.7 mm) at ANS and the mandible was advanced 13.1 +/- 5.1 min at menton, 10 +/- 4.4 mm at point B, and 6.9 +/- 3.7 mm at lower incisor edge. Postsurgical hard tissue changes were not statistically significant. While the upper oropharyngeal airway decreased significantly (4.2 +/- 3.4 min) immediately after surgery, the narrowest retropalatal, lowest retropalatal airway, and the narrowest retroglossal airway measurements increased 2.9 +/- 2.7, 3.7 +/- 3.2, and 4.4 +/- 4.4 mm, respectively. Over the average 34 months Postsurgical period, upper retropalatal airway increased 3.9 +/- 3.7 mm, while narrowest retropalatal, lowest retropalatal airway, and narrowest retroglossal airway remained stable. Head posture showed flexure immediately after Surgery (4.8 +/- 5.9 degrees) and extension postsurgically (1.6 +/- 5.6 degrees).Conclusion: Maxillo-mandibular advancement with counter-clockwise rotation produces immediate increases in middle and lower oropharyngeal airway dimensions, which were constrained by changes in head posture but remain stable over the postsurgical period. The upper oropharyngeal airway space increased only on the longest follow-up. (C) 2006 American Association of Oral and Maxillofacial Surgeons.

Quantitative structural analysis of the transition from LT-LixCoO2 to HT-LixCoO2 using the rietveld method: correlation between structure and electrochemical performance

A quantitative phase analysis was made of LiXCoO2 powders obtained by two distinct chemical methodologies at different temperatures (from 400 to 700degreesC). A phase analysis was made using Rietveld refinements based on X-ray diffraction data, considering the LiXCoO2 powders as a multiphase system that simultaneously contained two main phases with distinct, layered and spinel-type structures. The sults showed the coexistence of both structures in LiXCoO2 obtained at low temperature (400 and 500degreesC), although only the layered structure was detected at higher temperatures (600 and 700degreesC, regardless of the chemical powder process employed. The electrochemical performance, evaluated mainly by the cycling reversibility of LiXCoO2 in the form of cathode insertion electrodes, revealed that there is a close correlation between structural features and the electrochemical response, with one of the redox processes (3.3 v/3.9 v) associated only with the presence of the spinel-type structure. (C) 2003 Elsevier B.V. All rights reserved.

The effect of microwave annealing on the electrical characteristics of lanthanum doped bismuth titanate films obtained by the polymeric precursor method

Lanthanum doped bismuth titanate thin films (Bi3.25La0.75Ti3O12-BLT) were produced by the polymeric precursor method and crystallized in a domestic microwave oven and in conventional furnace. Using platinum coated silicon substrates configuration, ferroelectric properties of the films were determined with remanent polarization P-r and a coercive field E-c of 3.9 mu C/cm(2) and 70 kV/cm for the film annealed in the microwave oven and 20 mu C/cm(2) and 52 kV/cm for the film annealed in conventional furnace, respectively. The films annealed in conventional furnace exhibited excellent retention-free characteristics at low infant periods indicating that BLT thin films can be a promise material for use in nonvolatile memories. on the other hand, the pinning of domains wall causes a strong decay at low infant periods for the films annealed in the microwave furnace which makes undesireable the application for future FeRAMS memories. (c) 2005 Elsevier B.V. All rights reserved.

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

Statement of problem. Ceramic surface treatment is crucial for bonding to resin. High crystalline ceramics are poorly conditioned using traditional procedures.Purpose. The purpose of this study was to evaluate the effect of silica coating on a densely sintered alumina ceramic relative to its bond strength to composite, using a resin luting agent.Material and methods. Blocks (6 X 6 X 5 mm) of ceramic and composite were made. The ceramic (Procera AllCeram) surfaces were polished, and the blocks were divided into 3 groups (n = 5): SB, airborne-particle abrasion with 110-mu m Al(2)O(3); RS, silica coating using Rocatec System; and CS, silica coating using CoJet System. The treated ceramic blocks were luted to the composite (W3D Master) blocks using a resin luting agent (Panavia F). Specimens were stored in distilled water at 37 degrees C for 7 days and then Cut in 2 axes, x and y, to obtain specimens with a bonding area of approximately 0.6 mm(2) (n = 30). The specimens were loaded to failure in tension in a universal testing machine, and data were statistically analyzed using a randomized complete block design analysis of variance and Tukey's test (alpha=.05). Fractured surfaces were examined using light microscopy and scanning electron microscopy to determine the type of failure. Energy-dispersive spectroscopy was used for surface compositional analysis.Results. Mean bond strength values (MPa) of Groups RS (17.1 +/- 3.9) (P = .00015) and CS (18.5 +/- 4.7) (P=.00012) were significantly higher than the values of Group SB (12.7 +/- 2.6). There was no statistical difference between Groups RS and CS. All failures occurred at the adhesive zone.Conclusion. Tribochemical silica coating systems increased the tensile bond strength values between Panavia F and Procera AllCeram ceramic.

Absence of cross-reactivity to myeloperoxidase of anti-thyroid microsomal antibodies in patients with autoimmune thyroid diseases

Background: Thyroperoxidase is the major antigen of the thyroid microsomal antibodies (TMA) detected in autoimmune thyroid diseases. Its amino acid sequence has 44% homology with myeloperoxidase (MPO), an enzyme present in the primary granules of neutrophils and one of the major antineutrophil cytoplasmic antibodies (ANCA) antigens. The objective of the present study was to investigate the presence of cross-reactivity to MPO of TMA. Methods: We studied sera from 51 patients with autoimmune thyroid diseases, all of them TMA-positive. The presence of ANCA was investigated by indirect immunofluorescence and by capture enzyme-linked immunosorbent assay. Results: ANCA were positive in 3.9% of the TMA-positive sera and none of them reacted with MPO. In contrast, the ANCA-positive sera revealed antielastase activity. None of the ANCA-positive cases presented clinical signs of vasculitis. However, these 2 patients had been on prolonged treatment with propylthiouracil. Conclusions: We conclude that there is no cross-reactivity to MPO of TMA in patients with autoimmune thyroid diseases, possibly because of difference in the spatial configuration of the immunodominant region. The presence of ANCA in patients with autoimmune thyroid diseases without evidence of vasculitis might result from propylthiouracil-induced polyclonal activation.

About the nanoporosity elimination above 800 degrees C in xerogels prepared from TEOS sono-hydrolysis

Small angle X-ray scattering measurements, bulk and skeleton density data and an in-situ study by dilatometric thermal analysis about the nanoporosity elimination above 800 degreesC in TEOS sonogels are presented. Apparently, two processes act during the nanoporosity elimination, which precedes the foaming phenomenon often observed in such systems. The first, with an activation energy of (3.9 +/- 0.4) x 10(2) kJ/mol and high frequency factor, is the controlling process of the most nanoporosity elimination at higher temperature. The value of this activation energy is compatible to that for viscous flux throughout densification process in typical silica-based materials. The second, with an activation energy of (49 +/- 5) kJ/mol and low frequency factor, seems to be the controlling process of the first and extremely slow nanoporosity elimination at low temperature.

Validation of an immunoassay method for the determination of traces of carbaryl in vegetable and fruit extracts by liquid chromatography with photodiode array and mass spectrometric detection

A competitive enzyme-linked immunosorbent assay (ELISA) method for carbaryl quantitation in crop extracts was validated by liquid chromatography (LC) with diode array detection (DAD). For this purpose, six crops (banana, carrot, green bean, orange, peach and potato) were chosen for recovery and reproducibility studies. The general sample preparation included extraction with methanol followed by liquid-liquid partitioning and clean-up on Celite-charcoal adsorbent column of the vegetable extracts. ELISA samples consisted of a diluted LC extract in assay phosphate buffer (pH 7.5). The potential effect of methanol in these samples was evaluated. It was observed that a maximum content of 10% methanol present in the assay buffer could be tolerated without expressive losses in the ELISA performance. Under these conditions, a IC50 similar to 1.48 mu g l(-1) was obtained. A minimum matrix effect with a 1:50 dilution of the methanolic extracts in assay buffer was noticed, except for green bean samples that inhibited completely the assay. For the vegetable extracts, the ELISA sensitivities varied from 3.9 to 5.7 mu g l(-1), and good recoveries (82-96%) with R.S.D.s ranging from 5.7 to 12.1% were found. An excellent correlation between the LC-DAD and ELISA techniques was obtained. The confirmation of the carbaryl in less concentrated samples was achieved by LC-mass spectrometry interfaced with atmospheric pressure chemical ionisation. The [M + H](+)= 202 and [M + H-57](+)=145 ions, equivalent to the protonated molecular and l-naphthol ions, respectively, were used to carbaryl identification in these samples. (C) 1998 Elsevier B.V. B.V. All rights reserved.