Nutrient accumulation and biomass production of alfafa after soil amendment with silicates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo semiótico sobre a verbovisualidade em manuais de língua inglesa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Desenvolvimento de tijolos cerâmicos com escória de alto-forno

The construction industry is booming, and the federal government is heavily financially supporting public housing. This scenario is very favorable for the development of construction materials, especially low-cost construction. Thus, this study aims to develop a new class of unfired clay masonry bricks: GGBS stabilized bricks. Studies show that the ground granulated blast furnace slag, a material used as raw material in cement manufacture, can be used together with calcium oxide in soil stabilization for the manufacture of bricks. This study aims to test and identify the best parameters for the manufacture of unfired bricks, adapting its composition to the materials found in Brazil and identify the optimum curing conditions for our climate. So far preliminary studies were done to verify the technical feasibility of the material. Future studies should be done to ascertain the economic feasibility and environmental gains of such material

Resposta da soqueira da cana-de-açúcar à aplicação de nitrogênio na ausência e na presença de silício

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Disponibilidade de fósforo em solo tratado com resíduos urbanos e industriais sob sistema de plantio direto cultivado com soja

Pós-graduação em Agronomia (Agricultura) - FCA

Política, Território, Poder e a Agroindustrialização em assentamentos de reforma agrária no Rio Grande do Sul

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito residual do calcário e da escória de siderurgia em soqueiras da cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Resposta da terceira soqueira da cana-de-açúcar à aplicação de nitrogênio na presença e ausência de silício

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Integration of R&D and new product development: case studies of Brazilian high-tech firms

One of the aspects that influence good performance of new product development (NPD) at high-tech companies is the integration of research and development (R&D) and the other functions involved with NPD. The objective of this paper is to examine why Brazilian medium and large sized high-tech companies are different with respect to the integration of R&D with NPD. An analysis of case studies was conducted at five Brazilian high-tech firms. Among the results, collectivism, which is characteristic of the Brazilian organisational culture, was seen to manifest itself in companies through the adoption of cross-functional teams; the valorisation of personal relations, which is stimulated by physical proximity; and project managers’ ample participation in different functions involving NPD.

Diagnose foliar da cultura da soja em função da aplicação superficial de lodos de esgoto e resíduos industriais sob diferentes doses em sistema plantio direto

The application of industrial and municipal waste in the soil may be recommended by your corrective and fertilizer value, giving the great potential for agricultural reuse, improves physical, chemical and biological soil properties and helps to reduce the consumption of fertilizers and correctives, without contamination by heavy metals. This study aimed to evaluate the absorption of nutrients and potentially toxic elements, and their effect on the development of soybean (Glycine max (L.) Merrill) grown under No-Tillage system (NT). The work was developed in the field, at the Experimental Farm Lageado - FCA / UNESP, Botucatu (SP) in an Oxisol under tropical climate of altitude. The experimental design was randomized blocks, factorial 4x4+1, with four replications. The treatments consisted of four residues: two sewage sludge, one centrifuged and treated with quicklime (LC) and a biodigester (LB) and two industrial wastes: steel slag (E) and lime mud (Lcal) , applied in dosages of 0, 2, 4 and 8 Mg ha-1. The surface application of LC, LB, Lcal and E residues in soil under NT favored the development of soybean, with no heavy metal contamination, given the current legislation.