Customized fiber glass posts. Fatigue and fracture resistance

Purpose: To evaluate the root fracture strength of human single-rooted premolars restored with customized fiberglass post-core systems after fatigue simulation. Methods: 40 human premolars had their crowns cut and the root length was standardized to 13 mm. The teeth were endodontically treated and embedded in acrylic resin. The specimens were distributed into four groups (n=10) according to the restorative material used: prefabricated fiber post (PFP), PFP+accessory fiber posts (PFPa), PFP+unidirectional fiberglass (PFPf), and unidirectional fiberglass customized post (CP). All posts were luted using resin cement and the cores were built up with a resin composite. The samples were stored for 24 hours at 37 degrees C and 100% relative humidity and then submitted to mechanical cycling. The specimens were then compressive-loaded in a universal testing machine at a crosshead speed of 0.5 mm/minute until fracture. The failure patterns were analyzed and classified. Data was submitted to one-way ANOVA and Tukey's test (alpha= 0.05). Results: The mean values of maximum load (N) were: PFP - 811.4 +/- 124.3; PFPa - 729.2 +/- 157.2; PFPf - 747.5 +/- 204.7; CP - 762.4 +/- 110. Statistical differences were not observed among the groups. All groups showed favorable restorable failures. Fiberglass customized post did not show improved fracture resistance or differences in failure patterns when compared to prefabricated glass fiber posts. (Am J Dent 2012;25:35-38).

Use of Rectangular Grid Miniplates for Fracture Fixation at the Mandibular Angle

Purpose: The aim of this study was to evaluate the clinical outcome of patients with mandibular angle fractures treated by intraoral access and a rectangular grid miniplate with 4 holes and stabilized with monocortical screws.Patients and Methods: This study included 45 patients with mandibular angle fractures from the Department of Oral and Maxillofacial Surgery São Paulo State University, Araraquara, Brazil, and from the Clinic of Oral and Maxillofacial Surgery at the University of Frankfurt, Germany. The 45 fractures of the mandibular angle were treated with a rectangular grid miniplate of a 2.0-mm system by an intraoral approach with monocortical screws. Clinical evaluations were postoperatively performed at 15 and 30 days and 3 and 6 months, and the complications encountered were recorded and treated.Results: The infection rate was 4.44% (2 patients), and in 1 patient it was necessary to replace hardware. This patient also had a fracture of the left mandibular body; 3 patients (6.66%) had minor occlusal changes that have been resolved with small occlusal adjustments. Before surgery, 15 patients (33.33%) presented with hypoesthesia of the inferior alveolar nerve; 4 (8.88%) had this change until the last clinical control, at 6 months.Conclusions: The rectangular grid miniplate used in this study was stable for the treatment of simple mandibular angle fractures through intraoral access, with low complication rates, easy handling, and easy adjustment, with a low cost. Concomitant mandibular fracture may increase the rate of complications. This plate should be indicated in fractures with sufficient interfragmentaty contact. (C) 2011 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 69:1436-1441, 2011

In Vitro Study of Fracture Load and Fracture Pattern of Ceramic Crowns: A Finite Element and Fractography Analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mechanical Strength and Analysis of Fracture of Titanium Joining Submitted to Laser and Tig Welding

This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG) welds in cylindrical rods of commercially pure titanium (cp Ti) with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and positioned in a plasma arc welding machine under argon atmosphere and vacuum, and titanium was injected under vacuum/pressure. The samples were X-rayed to detect possible welding flaws and randomly assigned to three groups to test the tensile strength and the fracture mechanism: intact, laser welding, and TIG welding. The tensile test results were investigated using ANOVA, which indicated that the samples were statistically similar. The fracture analysis showed that the cpTi samples subjected to laser welding exhibited brittle fracture and those subjected to TIG welding exhibited mixed brittle/ductile fracture with a predominance of ductile fracture with the presence of microcavities and cleavage areas. Intact samples presented the characteristic straightening in the fracture areas, indicating the ductility of the material.

Markers of tumors susceptibility in head and neck cancer

Genetic polymorphisms are associated with a number of enzymes involved in the induction of head and neck carcinomas. It has been suggested that such polymorphisms may be linked to cancer susceptibility. Using a control-case study molecular genetic approach, we have investigated the association between polymorphisms genes (CYPs, GSTs and NAT2 genes) and susceptibility in head and neck cancer.

Chromosome 22q a frequent site of allele loss in head and neck carcinoma

Background. Loss of heterozygosity (LOH) correlates with inactivated tumor suppressor genes. LOH at chromosome arm 22q has been found in a variety of human neoplasms, suggesting that this region contains a tumor suppressor gene(s) other than NF2 important to tumorigenesis. The aim of this study was to evaluate the presence of LOH on chromosome 22q11.2-13 and determine whether there was a relationship between loss in this genomic region and tumor histologic parameters, anatomic site, and survival in patients with squamous cell carcinoma of the head and neck (HNSCC).Methods. Fifty matched blood and HNSCC tumor samples taken at the time of surgical treatment were evaluated for LOH by use of four microsatellite markers mapping to 22q11.2-q13. Clinical information was available for all patients. The frequency and distribution of LOH was correlated with clinical (age, sex, use of tobacco and alcohol, site of primary tumor, clinical stage, adjuvant therapy and overall survival) and histologic parameters (histopathologic stage, tumor differentiation).Results. LOH at 22q was found in 19 of 50 (38%) informative tumors. The respective incidence of allelic loss for the patients was as follows: 28% at D22S421, 10% at D22S277, 8% at D22S44S, and 4% at D22S280. No statistical differences were apparent with a mean follow-up of 30 months. Laryngeal tumors showed a higher incidence of LOH compared with oral tumors.Conclusions. These results suggest that the D22S277 locus may be closely linked to a tumor suppressor gene (TSG) and involved in upper aerodigestive tract carcinogenesis. In particular, laryngeal tumors may harbor another putative TSG on 22q11.2-q12.3 that may play a role in aggressive stage III/IV disease. (C) 2000 John Wiley & Sons, Inc.

DNA gains at 8q23.2: a potential early marker in head and neck carcinomas

Gains or amplifications involving chromosome arm 8q are one of the most recurrent chromosomal alterations in head and neck tumors. To characterize previously reported gains, we performed fluorescence in situ hybridization (FISH) using the sequences BAC RP1179E1 and 8-centromere PMJ 128 as probes. Gains and/or amplifications were detected in all 19 cases evaluated by FISH. The FISH analysis, but not G-banding, revealed homogeneously staining region in three cases. We conclude that gains of one or more genes on chromosome arm 8q may be important for the early stages of head and neck carcinomas. (C) 2003 Elsevier B.V. All rights reserved.

Classical and molecular cytogenetic analysis in head and neck squamous cell carcinomas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

CYP1A2*1C, CYP2E1*5B, and GSTM1 polymorphisms are predictors of risk and poor outcome in head and neck squamous cell carcinoma patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

microRNA evaluation of unknown primary lesions in the head and neck

Unknown primary malignancy in the head and neck is not an infrequent diagnosis for patients with metastatic cervical lymph nodes. Although linked with a relatively good prognosis following radiation treatment, widespread radiation is coupled with significant morbidity. Altered microRNA (miRNA) expression has been associated with both cancer progression and metastasis. We sought to determine whether miRNA expression analysis could be used as a diagnostic tool to discover the primary site of malignancy, within the head and neck. We used quantitative real-time PCR to identify miRNA expression profiles of squamous cell carcinoma of the tonsil, base of tongue and post-nasal space, as well as their corresponding metastatic lymph nodes, from 6 patients. Our results revealed that each cancer maintained its expression profile between the primary site and the nodal metastasis (r = 0.82, p < 0.0001). In addition, each anatomical sub-site maintained a distinct miRNA profile between individual patients (r = 0.79, p < 0.0001). Finally, between sub-sites, the miRNA profiles were distinct (p < 0.0001). As proof of principle, our study provides an indication that miRNA expression analysis may be useful to compare the primary lesion and local metastatic disease. This may be clinically relevant to predict the primary site of origin of metastatic disease, when the primary site remains obscure.

Methylation profile of genes CDKN2A (p14 and p16), DAPK1, CDH1, and ADAM23 in head and neck cancer

Hypermethylation in the promoter region has been associated with a loss of gene function that may give a selective advantage to neoplastic cells. In this study, the methylation pattern of genes CDKN2A (alias p14, p14(ARF), p16, p16(INK4a)), DAPK1, CDH1, and ADAM23 was analyzed in 43 samples of head and neck tumors using methylation-specific polymerase chain reaction. In the oropharynx, there was a statistically significant association between hypermethylation of the DAPK1 gene and the occurrence of lymph node metastases, and in the larynx there was statistically significant evidence of an association between hypermethylation of the ADAM23 gene and advanced stages of the tumors. Thus, a correlation was observed between hypermethylation of the promoter region of genes DAPK1 and ADAM23 and the progression of head and neck cancer. (c) 2007 Elsevier B.V. All rights reserved.

LHX6 is a sensitive methylation marker in head and neck carcinomas

Head and neck cancer remains a morbid and often fatal disease and at the present time few effective molecular markers have been identified. The purpose of the present work was to identify new molecular markers for head and neck squamous cell carcinoma (HNSCC). We applied methylation-sensitive arbitrarily primed PCR (MS/APPCR) to isolate sequences differentially methylated in HNSCC. The most frequently hypermethylated fragment we found maps close to a cytosine guanine dinucleotide (CpG) island on chromosome 9q33.2, and hypermethylation of this CpG island was associated with transcriptional silencing of an alternative transcript of the LHX6 gene. Using combined bisulfite restriction analysis (COBRA), hypermethylation of this fragment was detected in 13 of 14 (92.8%) HNSCC cell lines studied and 21 of 32 (65.6%) primary tumors, whereas little or no methylation was seen in 10 normal oral mucosa samples. We extended this investigation to other cancer cell lines and methylation was found in those derived from colon, breast, leukemia and lung, and methylation was also found in 12/14 primary colon tumors. These findings suggest that differentially methylated (DIME)-6 hypermethylation is a good cancer marker in HNSCC as well as in other kinds of neoplasias and confirm the importance of searching for markers of epigenetic dysregulation in cancer.

Epigenetic Silencing of CRABP2 and MX1 in Head and Neck Tumors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Femur bone repair in ovariectomized rats under the local action of alendronate, hydroxyapatite and the association of alendronate and hydroxyapatite

P>An evaluation was made of the local action of alendronate sodium (A), hydroxyapatite (HA) and the association of both substances (A + HA), in different molar concentrations, on the femur bone repair of ovariectomized rats. Ninety-eight animals were divided into seven groups: control (C), starch (S), alendronate 1 mol (A1), alendronate 2 mols (A2), hydroxyapatite 1 mol (HA1), hydroxyapatite 2 mols (HA2) and the association of alendronate + hydroxyapatite (A + HA). Rats weighing about 250 g were ovariectomized and 2.5-mm diameter bone defects were made on the left femur 30 days later. Each experimental group had defects filled with appropriate material, except for group C (control). The animals were killed 7 and 21 days after surgery. Histological, histomorphometric and statistical analyses of bone neoformation in the bone defect site were performed. From the histological standpoint, the major differences occurred after 21 days. All specimens in groups C, S, HA1 and HA2 presented linear closure of the bone defect, and most animals in groups A1, A2 and A + HA showed no bone neoformation in the central area of the defect. No statistically significant difference was found among the experimental groups after 7 days; after 21 days, group HA2 presented the highest amount of neoformed bone. There was no significant difference among groups A1, A2 and A + HA in the two study periods. It was concluded that alendronate, either isolated or in association with hydroxyapatite, had an adverse effect on bone repair in this experimental model. Moreover, the hydroxyapatite used here proved to be biocompatible and osteoconductive, with group HA2 showing the best results.

Searching for molecular markers in head and neck squamous cell carcinomas (HNSCC) by statistical and bioinformatic analysis of larynx-derived SAGE libraries

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)