Development of ceramic cutting tools for future application on dry machining

Advanced ceramic materials constitute a mature technology with a very broad base of current and potential applications and a growing list of material compositions. Within the advanced ceramics category, silicon nitride based ceramics are wear-resistant, corrosion-resistant and lightweight materials, and are superior to many materials with regard to stability in high-temperature environments. Because of this combination the silicon nitride ceramics have an especially high potential to resolve a wide number of machining problems in the industries. Presently the Si3N4 ceramic cutting tool inserts are developed using additives powders that are pressed and sintered in the form of a cutting tool insert at a temperature of 1850 °C using pressureless sintering. The microstructure of the material was observed and analyzed using XRD, SEM, and the mechanical response of this array microstructure was characterized for hardness Vickers and fracture toughness. The results show that Si3N4/20 wt.% (AlN and Y 2O3) gives the best balance between hardness Vickers and fracture toughness. The Si3N4/15 wt.% (AlN and Y 2O3) composition allows the production of a very fine-grained microstructure with low decreasing of the fracture toughness and increased hardness Vickers. These ceramic cutting tools present adequate characteristics for future application on dry machining. © (2010) Trans Tech Publications.

Functional nanostructured catalysts based on the niobates to the dry methane reforming and ethylene homologation reactions

Catalytic activity and selectivity of niobate-based nanostructured materials were investigated. Dry methane reforming (DMR) and ethylene homologation reaction (EHR) were selected as test reactions. KSr 2Nb5O15, Sr2NaNb5O 15 and NaSr2(NiNb4)O15 δ niobate powders were prepared by the high energy ball milling method and calcined in a reductor atmosphere. N2 adsorption isotherms, X-ray diffraction and infrared spectroscopy characterization was performed. Hydrogen pretreated niobates showed from low to moderate catalytic initial activity in DMR's test, nevertheless the materials were deactivated rapidly and the kinetic parameters associated to deactivation were estimated. Otherwise, non-treated catalysts showed a high initial activity in EHR's test and KSr2Nb 5O15 catalyst requires 24 h to the total deactivation with a high selectivity to form propylene. A reaction mechanism to the propylene formation is discussed. © 2012 Elsevier Ltd. All rights reserved.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.

Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Anatomical study of the retroarticular process in dry human skulls

Introduction: The retroarticular process is a bony prominence formed by the thickening of the lateral border of the mandibular fossa, forming the posterior wall of the temporomandibular joint. Since little is known and discussed about the retroarticular process, our aim was to study its presence, shape and size, relating these findings to the shape of the skulls according to the horizontal cephalic index. Materials and Methods: We used 400 dry human skulls of the Institute of Science and Technology - UNESP Anatomy Laboratory. Each skull was classified in brachycranics, mesocranics or dolichocranics, and then positioned on a craneostat to measure the height of the retroarticular process from its lower extremity to the auriculo-orbital plane. The width was obtained by measuring the base of the process on its longer lateral axis. Results: The retroarticular process was found bilaterally in 397 skulls (99.25%). All the processes were classified into the following shapes: pyramidal (35.55%), tubercular (31.78%), mammilar (20.73%), crest-like (9.05%) and molar shape (2.89%); 254 skulls (63.50%) showed the same type of process at the right and left sides (Kappa=0.496, moderate agreement). The average height and width were 5.28 mm and 12.81 mm, respectively. Conclusion: The retroarticular process was found in almost all the skulls examined. There are no significant evidences about the relationship among the presence, shape and size of the retroarticular process and the shape of the skulls according to the horizontal cephalic index. However, our findings led us to infer that there would be a functional relationship between the process and the temporomandibular joint.

Aquatic Exercise is as Effective as dry Land Training to Blood Pressure Reduction in Postmenopausal Hypertensive Women

Background and Purpose: The evidence of the benefits from regular physical activity to hypertensives is based on dry land training studies. Therefore, the aim of this study is to compare the effect of aquatic exercise with dry land training on hypertensive women. Methods: This is a randomized controlled study with 52 post-menopausal hypertensive women. The patients were randomly allocated in three groups: water aerobic training group (n=19), dry land aerobic training group (n=19) and a non-intervention control group (n=14). The training protocol was performed by 12weeks. Results: There were no differences among the three groups concerning basal blood pressure (BP) and biochemical variables. In water group, there was a statistically significant reduction of systolic BP from 136±16mmHg at zero week to 124±18mm Hg at 11th week and 124±15mmHg at 12th week. In dry land training group, there was a statistically significant reduction of systolic BP from 138±15mmHg at zero week to 125±10mmHg at 7th week, 127±10mmHg at 10th week and 126±9mmHg at 12th week. The control group presented no change in any of the assessed variables. No changes were carried out in any antihypertensive medications during study. Discussion: This is a randomized controlled study that demonstrates the antihypertensive efficacy of aerobic aquatic exercise. © 2013 John Wiley & Sons, Ltd.

Accumulation of dry mass and macronutrients by sourgrass plants

The experiment was carried out aiming to analyze the dry mass production and distribution and the content and accumulation of macronutrients in sourgrass (Digitaria insularis) plants cultivated under mineral nutrition standard conditions. Plants grew in 7-liter pots filled with sand substrate and daily irrigated with nutrient solution, being maintained under greenhouse conditions. Treatments consisted of times of evaluation (21, 35, 49, 63, 77, 91, 105, 119, and 133 days after emergence - DAE) and were arranged in a completely randomized design with four replicates. Sourgrass showed small accumulation of dry mass (0.3 g per plant) and macronutrients (3.7 mg of N per plant, 0.4 mg of P per plant, 5.6 mg of K per plant, 0.9 mg of Ca per plant, 0.7 mg of Mg per plant, and 0.3 mg of S per plant) at vegetative growth stage (< 49 DAE). Those accumulations increased mainly after 77 DAE, reaching the maximum theoretical value at 143, 135, 141, 129, 125, 120, and 128 DAE, for dry mass (12.4 g per plant), N (163.2 mg per plant), P (27.1 mg per plant), K (260.5 mg per plant), Ca (47.6 mg per plant), Mg (30.9 mg per plant), and S (13.7 mg per plant), respectively. K and N were found with higher rates and, as a consequence, they were required and accumulated in greater amounts in plant tissues of sourgrass.

Reproductive performance of Santa Ines ewes during dry and rainy seasons in eastern Amazon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fluticasone/formoterol dry powder versus budesonide/formoterol in adults and adolescents with uncontrolled or partly controlled asthma

This 12-week study compared the efficacy and safety of a fixed combination of fluticasone propionate plus formoterol (FL/F) 250/12 mu g b.i.d. administered via a dry powder inhaler (DPI) (Libbs Farmaceutica, Brazil) to a combination of budesonide plus formoterol (BD/F) 400/12 mu g b.i.d. After a 2-week run-in period (in which all patients were treated exclusively with budesonide plus formoterol), patients aged 12-65 years of age (N = 196) with uncontrolled asthma were randomized into an actively-controlled, open-labeled, parallel-group, multicentre, phase III study. The primary objective was to demonstrate non-inferiority, measured by morning peak expiratory flow (mPEF).The non-inferiority was demonstrated. A statistically significant improvement from baseline was observed in both groups in terms of lung function, asthma control, and the use of rescue medication. FL/F demonstrated a statistical superiority to BD/F in terms of lung function (FEV1) (p = 0.01) and for asthma control (p = 0.02). Non-significant between-group differences were observed with regards to exacerbation rates and adverse events.In uncontrolled or partly controlled asthma patients, the use of a combination of fluticasone propionate plus formoterol via DPI for 12-weeks was non-inferior and showed improvements in FEV1 and asthma control when compared to a combination of budesonide plus formoterol. (Clinical Trial number: ISRCTN60408425). (C) 2013 Elsevier Ltd. All rights reserved.

Application of two segmentation protocols during the processing of virtual images in rapid prototyping: ex vivo study with human dry mandibles

The aim of this study was to evaluate the accuracy of virtual three-dimensional (3D) reconstructions of human dry mandibles, produced from two segmentation protocols (outline only and all-boundary lines).Twenty virtual three-dimensional (3D) images were built from computed tomography exam (CT) of 10 dry mandibles, in which linear measurements between anatomical landmarks were obtained and compared to an error probability of 5 %.The results showed no statistically significant difference among the dry mandibles and the virtual 3D reconstructions produced from segmentation protocols tested (p = 0,24).During the designing of a virtual 3D reconstruction, both outline only and all-boundary lines segmentation protocols can be used.Virtual processing of CT images is the most complex stage during the manufacture of the biomodel. Establishing a better protocol during this phase allows the construction of a biomodel with characteristics that are closer to the original anatomical structures. This is essential to ensure a correct preoperative planning and a suitable treatment.

Dry and wet seasons set the phytochemical profile of the Copaifera langsdorffii Desf. essential oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dry matter yield and tillering of brachiarias sown at depths intercropped with corn

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic parameter estimates for feed efficiency and dry matter intake and their association with growth and carcass traits in Nellore cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

NUTRITIONAL STATUS AND DRY MASS PRODUCTION OF ALFALFA IN FUNCTION OF POTASSIUM RATES IN TWO SOILS

Potassium fertilization is very important to alfalfa crop in terms of yield, quality and persistence of forage, especially on soils naturally poor K. Thus, to assess the effects of K fertilization in alfalfa production and nutritional status, was carried out an experiment in a greenhouse using samples of a Dystrophic Oxisol medium texture (LV) (0.6 mmol(c) dm(-3) K) and a Dystrophic Ultisol sandy/medium texture (PVA) (2.2 mmol(c) dm(-3) K). A completely randomized design in a factorial arrangement 6 x 2 (six K rates and two soils) was used, with four replications. The K rates used were: 0, 25, 50, 100, 150 and 200 mg kg(-1) K. Potassium fertilization increased K content in soil and shoots. Dry matter production was increased with the K addition. However, in the PVA, this occurred only in the second cut. In LV, potassium fertilization increased N concentration in alfalfa shoots in both cuts. Plants with K concentration around 10 g kg(-1) had typical symptoms of this nutrient deficiency. The K critical levels of K in soil and shoots were 1.8 mmolc dm(-3) and 16.7 g kg(-1), respectively.

SILICON IN ROW AND NITROGEN IN TOPDRESSING FERTILIZATION ON RICE UNDER DRY LAND AND SPRINKLER IRRIGATION CONDITIONS

The objective of this work was to evaluate the effects of silicon application adjusted with nitrogen fertilization via top-dressing on grain productivity, the silicon contents of the soil, in the plant tissue and nitrogen contents in dry and irrigated conditions. The experimental outlining was from designed blocks with subdivided parcels and four repetitions. The treatments consisted of culture system (dry and irrigated) and the under parcels by the combination of silicon (0 and 100 kg ha(-1)), in magnesium and calcium silicate form (with 23% of SiO2), and four doses of N (urea) via top-dressing (0, 30, 60 and 90 kg ha(-1)). Silicon application at sowing furrow was a viable technique because it provided significant increase in the content of this element in the root growth of rice. The application of silicon in the sowing furrow did not change the content of the element nor the nitrogen nutrition in rice plants. The nitrogen application reduced the silicon content and increased nitrogen nutrition in rice plants. Silicon application at sowing furrow provided no increase in rice grain yield. When there was no water limitation to nitrogen fertilization enhanced linearly on rice grain yield, whereas under water stress the effect of nitrogen fertilization was limited.