Characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis

Tannases have attracted wider attention because of their biotechnological potential, especially enzymes from filamentous fungi and other microorganisms. However, the biodiversity of these microorganisms has been poorly explored, and few strains were identified for tannase production and characterization. This article describes the production, purification and characterization of a glucose- and solvent-tolerant extracellular tannase from Aspergillus phoenicis. High enzymatic levels were obtained in Khanna medium containing tannic acid up to 72 h at 30 °C under 100 rpm. The purified enzyme with 65% of carbohydrate content had an apparent native molecular mass of 218 kDa with subunits of 120 kDa and 93 kDa and was stable at 50 °C for 1 h. Optima of temperature and pH were 60 °C and 5.0-6.5, respectively. The enzyme was not affected significantly by most ions, detergents and organic solvents. While glucose did not affect the tannase activity, the addition of a high concentration of gallic acid did. The Km values were 1.7 mM (tannic acid), 14.3 mM (methyl-gallate) and 0.6 mM (propyl-gallate). The enzyme was able to catalyze the transesterification reaction to produce propyl-gallate. All biochemical properties suggest the biotechnological potential of the glucose- and solvent-tolerant tannase from A. phoenicis. © 2012 Elsevier B.V. All rights reserved.

Effects of dentin dry/moist condition on the immediate adhesive performance of different solvent-based etch-and-rinse adhesivesystems

Purpose: The purpose of this research was to analyze and measure, under optical microscopy, the hybrid layer thickness and resin tags length, as well as the microtensile bond strength of two conventional adhesive systems when applied to dry and moist dentinal substrate. Methods: Thirty-two extracted human molars were randomly distributed into four groups according to the adhesive systems (XP Bond and Prime&Bond 2.1) and moisture condition (dry and moist). In Groups I and II, XP adhesive system was applied on dry and moist dentin, respectively; while Groups III and IV received PB adhesive system, in the same way as was done in Groups I and II, respectively. After adhesive and restorative procedures, all specimens were sectioned along their long axes; one hemi-tooth sample was subjected to the microtensile bond strength test while the other was decalcified and serially sectioned into six micron thick slices and sequentially mounted on glass slides. These sections were stained by the Brown and Brenn method for posterior analysis and measurement of the hybrid layer and resin tags under a light microscope with a micrometric ocular 40/075. Results: Data were analyzed using two-way ANOVA and Tukey's test (α=0.05). For the variable hybrid layer thickness, XP showed no significant differences between dry and moist dentin (5.2 μm and 5.5 μm, respectively), but for PB, hybrid layer was significantly thicker for moist (4.0 μm) than for dry dentin (3.0 μm). For the variable resin tags length XP showed 17.9 μm length for dry dentin and 20.8 μm for moist dentin; PB 11.7 μm for dry and 12.69 μm for moist dentin;there was no significant differences between them, independent of the moisture condition. For the variable microtensile bond strength, XP showed 38.0 MPa for dry dentin and 44.5 MPa for moist dentin; and PB showed 22.7 MPa for dry dentin and 20.8 MPa for dry dentin no significant difference was observed between moist and dry dentin for XP (p=0.2) and PB (p=0.7), but XP was presented significantly higher bond strength values than PB in both moisture conditions (p=0.003 for dry and p=0.002 for moist). Conclusion: The two-step butanol-based etch-and-rinse adhesive XP Bond presented a superior behavior with regard to the hybrid layer thickness, length of resin tags and bond strength to dry and moist dentin substrates when compared with two-step acetone-based adhesive system Prime&Bond2.1. © 2013 Elsevier Ltd.

Enzyme replacement therapy for Anderson-Fabry disease.

Anderson-Fabry disease is an X-linked defect of glycosphingolipid metabolism. Progressive renal insufficiency is a major source of morbidity, additional complications result from cardio- and cerebro-vascular involvement. Survival is reduced among affected males and symptomatic female carriers. To evaluate the effectiveness and safety of enzyme replacement therapy compared to other interventions, placebo or no interventions, for treating Anderson-Fabry disease. We searched 'Clinical Trials' on The Cochrane Library, MEDLINE, EMBASE, LILACS and the Cystic Fibrosis and Genetic Disorders Group's Inborn Errors of Metabolism Trials Register (date of the most recent search: 11 September 2012). The original search was performed in September 2008.Date of the most recent search of the Cystic Fibrosis and Genetic Disorders Group's Inborn Errors of Metabolism Trials Register: 11 September 2012. Randomized controlled trials of agalsidase alfa or beta in participants diagnosed with Anderson-Fabry disease. Two authors selected relevant trials, assessed methodological quality and extracted data. Six trials comparing either agalsidase alfa or beta in 223 participants fulfilled the selection criteria.Both trials comparing agalsidase alfa to placebo reported on globotriaosylceramide concentration in plasma and tissue; aggregate results were non-significant. One trial reported pain scores, there was a statistically significant improvement for participants receiving treatment at up to three months, mean difference -2.10 (95% confidence interval (CI) -3.79 to -0.41); at up to five months, mean difference -1.90 (95% CI -3.65 to -0.15); and at up to six months, mean difference -2.00 (95% CI -3.66 to -0.34). There was a significant difference in pain-related quality of life at over five months and up to six months, mean difference -2.10 (95% CI -3.92 to -0.28) but not at other time-points. Neither trial reported deaths.One of the three trials comparing agalsidase beta to placebo reported on globotriaosylceramide concentration in plasma and tissue and showed significant improvement: kidney, mean difference -1.70 (95% CI -2.09 to -1.31); heart, mean difference -0.90 (95% CI -1.18 to -0.62); and composite results (renal, cardiac, and cerebrovascular complications and death), mean difference -4.80 (95% CI -5.45 to -4.15). There was no significant difference between groups for death; no trials reported on pain.Only one trial compared agalsidase alfa to agalsidase beta. There was no significant difference between the groups for any adverse events, risk ratio 0.36 (95% CI 0.08 to 1.59), or any serious adverse events; risk ratio 0.30; 95% CI 0.03 to 2.57). Six small, poor quality randomised controlled trials provide no robust evidence for use of either agalsidase alfa and beta to treat Anderson-Fabry disease.

Effects of bovine somatotropin administration on growth, physiological, and reproductive responses of replacement beef heifers

This experiment compared growth, body composition, plasma IGF-I and leptin, and reproductive development of beef heifers receiving or not recombinant bovine ST (BST) beginning after weaning until the first breeding season. Fifty Angus × Hereford heifers (initial BW = 219 ± 2 kg; initial age = 208 ± 2 d), weaned at approximately 6 mo of age, were assigned to the experiment (d 0 to 210). On d 0, heifers were ranked by initial BW and age and assigned to 1) treatment with BST or 2) saline control. Heifers assigned to the BST treatment received subcutaneous (s.c.) injections containing 250 mg of sometribove zinc whereas control heifers received a 5-mL s.c. injection of 0.9% saline every 14 d. Treatments were initiated on d 14 and last administered on d 196. Heifers were maintained on separate pastures harvested for hay the previous summer according to treatment and received grass and alfalfa hay at a rate to provide a daily amount of 7.0 and 1.0 kg of DM per heifer, respectively. Heifer shrunk BW was collected on d 1 and 211 for heifer ADG calculation. Blood samples were collected weekly from d 0 to 210 for determination of plasma progesterone to estimate puberty attainment as well as plasma concentrations of IGF-I and leptin in selected samples. On d 0, 63, 133, and 189, heifers were evaluated for intramuscular marbling, LM depth, and backfat thickness via real-time ultrasonography. No treatment effects were detected (P = 0.27) for heifer ADG (0.49 vs. 0.51 kg/d for control and BST heifers, respectively; SEM = 0.02). Mean backfat thickness was lesser (P < 0.01) in BST heifers compared with control cohorts (3.56 vs. 3.92 mm, respectively; SEM = 0.08). Heifers receiving BST had greater plasma IGF-I concentrations compared with control cohorts 7 d after treatment administration (treatment × day interaction; P < 0.01). Mean plasma leptin concentrations were lesser (P = 0.05) in BST heifers compared with control cohorts (1.82 vs. 2.03 ng/mL, respectively; SEM = 0.07). Onset of puberty was hastened in BST heifers compared with control cohorts (treatment x day interaction; P = 0.04). In summary, a greater proportion of BST heifers reached puberty during the experiment compared with control cohorts, despite lesser plasma leptin concentrations, backfat thickness, and similar ADG. Hence, circulating IGF-I was positively associated with hastened puberty attainment independently of growth rate, circulating leptin concentrations, and body fat content of replacement beef heifers. © 2013 American Society of Animal Science. All rights reserved.

Effects of corn replacement by sorghum in broiler diets on performance and intestinal mucosa integrity

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Phenotypic and metabolic aspects of prostatic epithelial cells in aged gerbils after antisteroidal therapy: Turnover in the state of chromatin condensation and androgen-independent cell replacement

The gerbil is a rodent considered a good model for studies of prostatic morphophysiology under different experimental conditions. Studies involving castration and steroidal blockers of aged gerbils showed that the glandular epithelium persists after long-term therapy, preventing the organ atrophy. Thus, the objective of this study was to evaluate the phenotypic characteristics and behavior of prostatic epithelial cells that remained after different periods of hormone ablation in aged gerbils. The identification of elements that influenced the survival of this cell type was performed by morphometric, nuclear phenotypes, ultrastructural and immune histochemical analysis. The most significant responses to treatment, by analyzing morphometric features, were observed during the first three time points (day 1, day 3, and day 7), after which there appeared to be an adjustment of the gland to the hormone ablation. All treatments led to changes in the state of chromatin condensation, DNA methylation pattern and phenotypic changes indicated cell senescence. Additionally, an increase in the basal cells seemed to guarantee self-renewal properties to the epithelium. These data indicate that changes occur at many levels, including gene expression and nuclear architecture in the epithelial cells, when aging and steroidal blockade are associated. These aspects are important when considering castration-resistant prostate cancer, a malignant tumor posing difficult therapeutic intervention. © 2013 Elsevier GmbH. All rights reserved.

Influence of solvent on the morphology and photocatalytic properties of ZnS decorated CeO2 nanoparticles

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessing the replacement of lead in solders: effects on resource use and human health

Human health and environmental concerns are not usually considered at the same time. Tin-lead solders are still widely used in several countries, including Brazil, by manufacturers of electronic assemblies. One of the options to reduce or eliminate lead from the manufacturing environment is its replacement with lead-free alloys. This paper applies emergy synthesis and the DALY indicator (Disability Adjusted Life Years) to assess the impact of manufacturing soft solder using tin, lead and other metals on the environment and on human health. The results are presented together with the company's financial results and the results calculated from the Brazilian statistical value of life. The calculation of emergy per unit showed that more resources are used to produce one ton of lead-free solders than to produce one ton of tin-lead solders, with and without the use of consumer waste recovered through a reverse logistics system. The assessment of air emissions during solder production shows that the benefits of the lead-free solution are limited to the stages of manufacturing and assembling. The tin-lead solder appears as the best option in terms of resource use efficiency and with respect to emissions into the atmosphere when the mining stage is included. A discussion on the influence of the system's boundaries on the decision-making process for materials substitution is presented. (C) 2012 Elsevier Ltd. All rights reserved.

Vegetable Oil Derived Solvent, and Catalyst Free Click Chemistry'' Thermoplastic Polytriazoles

Azide-alkyne Huisgen click chemistry provides new synthetic routes for making thermoplastic polytriazole polymers-without solvent or catalyst. This method was used to polymerize three diester dialkyne monomers with a lipid derived 18 carbon diazide to produce a series of polymers (labelled C18C18, C18C9, and C18C4 based on monomer chain lengths) free of residual solvent and catalyst. Three diester dialkyne monomers were synthesized with ester chain lengths of 4, 9, and 18 carbons from renewable sources. Significant differences in thermal and mechanical properties were observed between C18C9 and the two other polymers. C18C9 presented a lower melting temperature, higher elongation at break, and reduced Young's modulus compared to C18C4 and C18C18. This was due to the odd-even effect induced by the number of carbon atoms in the monomers which resulted in orientation of the ester linkages of C18C9 in the same direction, thereby reducing hydrogen bonding. The thermoplastic polytriazoles presented are novel polymers derived from vegetable oil with favourable mechanical and thermal properties suitable for a large range of applications where no residual solvent or catalyst can be tolerated. Their added potential biocompatibility and biodegradability make them ideal for applications in the medical and pharmaceutical industries.

Effects of catecholamines on volemic replacement with saline solution and the impact on heart rate variability in rabbits subjected to hemorrhage. A study by spectral analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mini-implants as provisional anchorage for the replacement of missing anterior teeth: A clinical report

This clinical report describes an adult patient referred for orthodontic treatment with mini-implants as anchorage to correct the root angulation of maxillary lateral incisors. The purpose of this report was to demonstrate the versatility of mini-implants placed in a vertical direction in esthetic areas. During orthodontic treatment, some aspects must be observed to preserve the interim restoration against the occlusal loads to avoid screw fracture. A fixed appliance was placed to correct the position of the maxillary anterior teeth and to complete the treatment. Acceptable esthetics and function were achieved.

Effects of neem oil (Azadirachta indica A. Juss) on the replacement of the midgut epithelium in the lacewing Ceraeochrysa claveri during larval-pupal metamorphosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impact of gestational diabetes and lactational insulin replacement on structure and secretory function of offspring rat ventral prostate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Use of a cashew nut shell liquid resin as a potential replacement for phenolic resins in the preparation of panels - a review

The Cashew Nut Shell Liquid (CNSL) can be considered as a versatile raw material with wide applications in the form of surface coatings, paints and varnishes, as well as the production of polymers. Within this context, the chemical constituents of CNSL (anarcadic acid, cardanol, 2-cardol and methylcardol) become promising in the development of new materials components. Once separated, CNSL can be used in the research and development of additives, surfactants, pharmaceuticals, pesticides, polymers, resins and others. Being a byproduct, CNSL used in the preparation of new materials is characterized as a truly technological innovation.

Effects of dexmedetomidine on pulse pressure variation changes induced by hemorrhage followed by volume replacement in isoflurane-anesthetized dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)