Susceptibility of winter crops to Pratylenchus brachyurus and effect on the nematode population in the maize crop

The aim of this study was to evaluate the susceptibility of winter crops to Pratylenchus brachyurus and their effect on the population of phytonematodes in the maize. To study the effect of the plants on nematodes, an experiment was set up in sandy, naturally-infested soil. The area was divided into strips, consisting of six blocks of 16 treatments, with eight winter treatments, subdivided on the basis of the fertilizer used (organic: bird litter, and synthetic: NPK). The initial nematode population was determined by sampling the soil (100 cm(3)) and weeds (10 g of root). The winter treatments put in place (bristle oats, chickpea, vetch bean, common bean, oilseed radish, wheat, intercropped bristle oats + oilseed radish and fallow), and the nematode population determined 100 days after sowing. Subsequently, two maize crops (summer and short season) were planted, and the nematode population in the soil and roots determined during crop full bloom. To evaluate the susceptibility of winter crops to nematodes, an experiment was conducted under controlled conditions, determining the nematode reproduction factor (RF) in the treatments described above. Both in the field and under controlled conditions, it was observed that the bristle oats, oilseed radish and intercropped oats + oilseed radish exhibited lower reproduction rates for P. brachyurus. In the field, lower population of nematodes was observed with the application of bird litter. Under controlled conditions, the highest RF were observed in the fallow plot and under common bean and chickpea, in that order.

Vermiculita como substrato para o teste de germinação de sementes de ipê-amarelo

Vermiculite is a substrate used in seedling production of forest species and can be an option for the germination test of ipe seeds. The objective of this research was to evaluate the use of vermiculite in the germination test of Tabebuia chrysotricha seeds and to stablish appropriate particle size and moisture for this substrate. Four replications of 20 seeds were sown in soil, sand, paper rolls, and vermiculite with different particle sizes: micron (0.15-0.20 mm), superthin (0.21-0.30 mm), thin (0.30-0.50 mm) and medium (0.50-1.19 mm) moistened with water equivalent to 0.5, 1.0, 1.5 and 2.0 times the weight of the dry subtrate. Germination test was carried out at 30 degrees C. The percentage of normal seedlings was obtained seven days after sowing (first count) and then weekly until 28 days, when abnormal seedlings and dead seeds were also counted. It was concluded that the germination test of ipe seeds can be carried out with thin or medium vermiculite moistened with water equivalent to 1.5 times the dry weight of the substrate. These treatments resulted in higher and faster germination (21 days).

EFFECT of DIFFERENT SOLID AMOUNTS IN THE PHYSICAL and MICROSCOPICAL PROPERTIES of SiC POROUS CERAMICS

The presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic material. on the other hand, the increase in solid load leads up to alterations in dispersion viscosity, increasing the thermal stresses during drying and sintering processes. In order to verify the solid percentage influence in ceramic final properties, samples were prepared with silicon carbide in different compositions using or not starch as binder agent and pore forming element. The characterization of the ceramic pieces was performed by superficial roughness measurements, porosity besides by optical and scanning electron microscopy. The results showed ceramics with SiC and starch presented physical and microscopic properties slightly higher in relation to those with only ceramic powder in their composition. The presence of organic material, agglomerated and foam during the forming were essential for the final properties of the studied samples.

Intake and performance of confined crossbred heifers fed different lipid sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Population structure and effects of inbreeding on milk yield and quality of Murrah buffaloes

To provide data for conservation, selection, and expansion programs of buffalo herds, this study evaluated the history of a population of Murrah buffaloes based on population structure and the effect of inbreeding on accumulated 305-d milk yield (MY), fat yield (FY), protein yield (PY), mozzarella production (MProd), and somatic cell score (SCS). The usefulness of including the individual inbreeding coefficient (F) or individual increase in inbreeding coefficient (Delta F) in the model to describe inbreeding depression was evaluated. Pedigree information from 8,054 animals born between 1976 and 2008 and 4,497 lactation records obtained from 12 herds were used. The realized effective population size was 40.10 +/- 1.27, and the mean F of the entire population was 2.14%. The ratio between the number of founders and ancestors demonstrated the existence of a bottleneck in the pedigree of this population, which may contribute to a reduction of genetic diversity. The effect of F on MY, FY, PY, MProd, and SCS was -1.005 kg, -0.299 kg, -0.246 kg, -1.201 kg, and -0.002 units, and the effect of Delta F transformed to equivalent F (%) for a mean of 2.57 equivalent generations was -4.287 kg, -0.581 kg, -0.383 kg, -2.001 kg, and -0.007 units, respectively. The inbreeding depression observed may have important economic repercussions for production systems. The Delta F can be considered the better of the two indicators of inbreeding depression due to its properties that prevent underestimation of this effect. A designed mating system to avoid inbreeding may be applied to this population to maintain genetic diversity.

Genotype by environment interaction for birth and weaning weights of composite beef cattle in different regions of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualitative characteristics of meat from confined crossbred heifers fed with lipid sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bayesian analysis of random regression models using B-splines to model test-day milk yield of Holstein cattle in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da adição de probiótico em dietas de leitões desmamados sobre as características do sistema digestório e de desempenho

Os objetivos foram avaliar os efeitos da adição de diferentes concentrações de probiótico (0; 200 e 300mg/kg de ração) em rações de leitões recém desmamados e em diferentes idades de abate, sobre as características do sistema digestório e desempenho zootécnico. Foram utilizados 35 leitões desmamados, distribuídos em delineamento em blocos casualizados em esquema fatorial 3x2+1 (três concentrações de probiótico x duas idades de abate + grupo abatido ao desmame). Foram abatidos cinco leitões no dia da desmama e os demais ao 31º e 41º dia de idade. Foram amostrados segmentos do duodeno e jejuno para a contagem de vilosidades, pesados o pâncreas e fígado e calculado o rendimento de carcaça. Para incidência de diarréia e desempenho, foram utilizados 30 animais e as avaliações foram realizadas nos seguintes períodos: P1- 0 a 10, P2- 11 a 20 e Período Total- 0 a 20 dias pós desmame. Não houve efeito das concentrações do probiótico sobre as características do sistema digestório e a incidência de diarréia, no entanto o ganho de peso e a conversão alimentar foram afetados. Concluiu-se que o ganho de peso e a conversão alimentar de leitões suplementados com 200mg de probiótico/kg de ração foi melhor do que o grupo suplementado com 300mg de probiótico/kg de ração. As diferentes concentrações de probiótico adicionadas na ração de leitões não alteraram as características do sistema digestório, mostrando-se alterações apenas em relação à idade do abate.

Relação entre características morfológicas e produção de leite em vacas da raça Gir

O objetivo deste trabalho foi determinar parâmetros genéticos relacionados a características morfológicas e suas correlações genéticas com a produção de leite, em vacas da raça Gir. Utilizaram-se 3.805 registros provenientes de 2.142 vacas. O modelo utilizado na análise de características morfológicas continha os efeitos fixos de rebanho, ano e estação de classificação, estádio da lactação e idade da vaca à classificação, além da identificação do classificador. Quanto à produção de leite, foram incluídos no modelo os efeitos fixos de rebanho, ano e estação de parição e idade da vaca ao parto. Os parâmetros genéticos foram obtidos por meio do aplicativo REMLF90. As estimativas de herdabilidade variaram de 0,09 a 0,54. A variabilidade genética aditiva da maioria das características é suficiente para que ganhos genéticos anuais significativos possam ser alcançados com o processo de seleção. As correlações genéticas entre as características morfológicas variaram de baixas a altas e, entre elas e a produção de leite, de baixas a moderadas. Altas correlações genéticas entre algumas características morfológicas implicam a possibilidade de exclusão de algumas delas do programa de melhoramento genético da raça Gir, no Brasil. As correlações genéticas entre produção de leite e algumas características morfológicas indicam que estas podem ser utilizadas na formação de índices de seleção.

Funções de covariância para produção de leite no dia do controle em bovinos Gir leiteiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos quantitativos de carcaças de bovinos de diferentes raças, alimentados com diferentes níveis de energia

Objetivou-se avaliar as características quantitativas da carcaça de bovinos machos não castrados, terminados em confinamento e abatidos aos 13-14 meses de idade. Foram utilizados 16 bezerros com nove meses de idade e peso médio inicial de 220 kg (oito Aberdeen Angus - AA e oito Hereford - HE), submetidos a dois níveis de energia (3,07 e 3,18 Mcal/kg de MS). O desenho experimental foi inteiramente casualizado, em arranjo fatorial 2 x 2 (duas raças e dois níveis de energia). O volumoso utilizado foi a silagem de milho, com 36% de grãos na matéria seca (MS). O concentrado nos tratamentos de menor nível de energia participou com 12% e naqueles de maior nível, com 32% da MS da dieta. Os animais foram abatidos quando, por estimativa, as carcaças apresentaram, na média, um mínimo de 190 kg. Os animais AA apresentaram maior rendimento de carcaça quente (54,95 contra 53,75%), maior comprimento de perna (64,12 contra 62,12 cm) e maior área do músculo Longissimus/100 kg de carcaça (29,31 contra 27,41 cm²). Os animais que receberam o maior nível de energia na dieta apresentaram maior comprimento de perna (71,75 contra 64,50 cm) e melhor conformação da carcaça (11,25 contra 10,12 pontos). Observou-se interação significativa entre raça e nível de energia para a espessura de gordura subcutânea, sendo a maior espessura verificada nas carcaças dos animais HE, que receberam o menor nível de energia.

Animal performance and carcass characteristics of Nellore young bulls fed coated or uncoated urea slaughtered at different weights

The objective of this study was to evaluate animal performance and carcass characteristics of 64 Nellore young bulls at 22 months of age finished in a feedlot and slaughtered at five body weights (350; 455; 485; 555 and 580 kg) fed diets containing coated or uncoated urea. The experimental design adopted was completely randomized, set in a 4 × 2 factorial arrangement, and for the variables assessed in the control animals, it was 5 × 2. No effect of interaction between slaughter weights and diets were observed, so the variables were analyzed separately, compared by polynomial contrasts and by the F test, respectively. The time animals remained in the feedlot to reach slaughter weights was 66, 88, 145 and 194 days. Average daily gain (ADG) showed quadratic behavior, with a maximum of 1.44 kg/day with animals of 491.7 kg. Dry matter intake (DMI) (kg/day) was similar in all the treatments, but it decreased linearly as body weight increased. The bionutritional efficiency worsened linearly as body weight rose. The elevation in slaughter weight resulted in linear decrease in the percentage of beef round and increase in forequarter. Backfat thickness and rib eye area of the longissimus increased linearly and the percentages of muscle and protein in the carcass reduced and those of fat and ether extract increased linearly as body weight increased. Average daily gain, DMI, feed efficiency and carcass characteristics were not affected by diets containing coated or uncoated urea. However, animals fed coated urea presenter better crude fiber and neutral detergent fiber intake.

Effect of pregnancy on the genetic evaluation of dairy cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Milk yield persistency in Brazilian Gyr cattle based on a random regression model

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)