Quality traits and lipid composition of meat from Nellore young bulls fed with different oils either protected or unprotected from rumen degradation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Charqui meats are hurdle technology meat products

Charqui meat is a tropical intermediate meat product formulated using hurdle technology, a concept described by Leistner (1,2). Salt, sodium nitrite, dehydration, and packaging are hurdles sequentially applied to inhibit deteriorating microorganisms with the possibility of selecting desirable microbiota. This would characterize charqui and its derivatives as fermented meat products. This paper reviews biochemical, physico-chemical, and ultrastructural changes that occur during processing of charquis.

Isolation of Mycobacterium gordonae from poultry slaughterhouse water in São Paulo State, Brazil

Water samples (24 untreated water, 12 treated water and 24 served water) used in different stages of the slaughter process were examined to identify a possible source of pathogenic mycobacteria. The isolates were identified based on microscopy, morphological and biochemical features, mycolic acid analysis and molecular method - PCR-restriction-enzyme analysis. Eighteen mycobacterial strains were isolated from 60 water samples: 11 from untreated water, 5 from treated water and 2 from served water. All mycobacteria isolated were identified as Mycobacterium gordonae and showed the following PRA genotypes: III (27.8%), IV (38.9%) and V (33.3%).

Shelf-life of tail meat of the giant river prawn, Macrobrachium rosenbergii, stored on ice

The objective of this study was to evaluate the shelf-life of peeled giant river prawn Macrobrachium rosenbergii stored directly in contact with ice (DCI), and without direct contact with ice (WCI). The prawns from DCI treatment showed an intense leaching of non-protein nitrogen (NPN) and total volatile bases nitrogen (TVB-N), thus suggesting that NPN or TVB-N should not be used as freshness indicators of peeled tails stored directly in contact with ice. Loss of flavor and a quick texture tactile decrease with time occurred in both treatments. The shelf-life of peeled tails prepared from M. rosenbergii was 7 days for DCI and 10 days WCI. © 2006 by The Haworth Press, Inc. All rights reserved.

Meat yield of Callinectes bocourti A. Milne Edwards, 1879 (Crustacea, Portunidae) in Iguape, São Paulo, Brazil

The objective of the present study was to analyze the meat yield for both sexes of the crab Callinectes bocourti in the region of Iguape, Brazil. The carapace width for males was 78.1-114.0 mm (96.7 ± 9.5 mm) and for females 76.0-106.3 mm (93.0 ± 7.8 mm). In males, the total wet weight ranged from 65.53 to 224.36 g (134.04 ± 40.77 g) and for females from 56.66 to 164.74 g (105.93 ± 26.88 g). A comparison of morphological structures revealed that the greatest meat yield was in the carapace (55.1%), followed by the right chela (16.9%), the left chela (15.9%), and the legs (12.1%). The total yield from the males (28.5%) was slightly higher than that from the females (22.1%). In general, portunids yield more meat than other crab species. The results of this study will allow the optimization of meat production for this crab species. Manual meat removal makes the process more expensive. This activity could offer an alternative to the fishing communities that live exclusively from this fishery resource. © 2007 Escuela de Ciencias del Mar Pontificia Universidad Católica de Valparaíso.

Presence of extraintestinal pathogenic Escherichia coli in butcheries in Taquaritinga, SP, Brazil

The study was conducted in twenty-three butcheries in the city of Taquaritinga, State of São Paulo, Brazil, surveyed during a 10 months period. Among two hundred and eighty-seven Escherichia coli strains isolated from samples of ground beef, meat-grinding-machines and the hands of manipulators, five were recognized as extraintestinal pathogenic E. coli (ExPEC), showing virulence factors (P and S fimbriae, hemolysin and aerobactin) and presenting multidrug resistance. Retail-sold food may constitute an important vehicle for the dissemination of ExPEC in communities, giving rise to reasons for concern.

Características sensoriais da carne de cordeiro maturada e injetada com cloreto de cálcio: Sensory characteristics of lamb meat ageing and injected with calcium chloride

Sensory characteristics of Morada Nova lambs meat (muscles Biceps femoris, Longissimus and Triceps brachii) submitted to effects of ageing and injection of calcium chloride were studied. The lambs were slaughtered at 25 kg of body weight. After rigor mortis, muscles were removed and submitted to treatments. The variance analysis indicated that ageing and calcium chloride didn't influence the attributes flavor (6.71) and tenderness (7.13) of meats from Biceps femoris. The interaction among the factors wasn't significant for tenderness, however it was significant for flavor. Ageing didn't affect colour (7.08), flavor (7.42), tenderness (7.83) and global impression (7.58) of meats from Longissimus without calcium chloride, and meats with calcium chloride also didn't affect. Ageing and calcium chloride factor didn't influence the attributes flavor and tenderness of meats from Triceps brachii. The interaction among the factors wasn't significant for attributes flavor and tenderness. The sensory quality of Morada Nova lambs meat, was shown similar with relationship to evaluated attributes when it was submitted to ageing and injection with calcium chloride.

Polymorphisms in FGFBP1 and FGFBP2 genes associated with carcass and meat quality traits in chickens

In the past, the focus of broiler breeding programs on yield and carcass traits improvement led to problems related to meat quality. Awareness of public concern for quality resulted in inclusion of meat quality traits in the evaluation process. Nevertheless, few genes associated with meat quality attributes are known. Previous studies mapped quantitative trait loci for weight at 35 and 42 days in a region of GGA4 flanked by the microsatellite markers, MCW0240 and LEI0063. In this region, there are 2 fibroblast growth factor binding protein (FGFBP) genes that play an important role in embryogenesis, cellulardifferentiation, and proliferation in chickens. The objective of this study was to identify and associate single nucleotide polymorphisms (SNPs) in FGFBP1 and FGFBP2 with performance, carcass, and meat quality in experimental and commercial chicken populations. In the commercial population, SNP g.2014G>A in FGFBP1 was associated with decreased carcass weight (P < 0.05), and SNP g.651G>A in FGFBP2 was associated with thawing loss and meat redness content (P < 0.05). Four haplotypes were constructed based on 2 SNPs and were associated with breast weight, thawing loss, and meat redness content. The diplotypes were associated with thawing loss, lightness, and redness content. The SNPs evaluated in the present study may be used as markers in poultry breeding programs to aid in improving growth and meat quality traits. © FUNPEC-RP.

Meat quality of young Nellore bulls with low and high residual feed intake

Fifty-nine Nellore bulls from low and high residual feed intake (RFI) levels were studied with the objective of evaluating meat quality traits. Animals were slaughtered when ultrasound-measured backfat thickness reached 4. mm, and samples of Longissimus were collected. A mixed model including RFI as fixed effect and herd and diet as random effects was used, and least square means were compared by t-test. More efficient animals consumed 0.730. kg dry matter/day less than less efficient animals, with similar performance. No significant differences in carcass weight, prime meat cuts proportion, chemical composition, pH, sarcomere length, or color were observed between RFI groups. Shear force, myofibrillar fragmentation index and soluble collagen content were influenced by RFI, with a higher shear force and soluble collagen content and a lower fragmentation index in low RFI animals. Feedlot-finished low RFI young Nellore bulls more efficiently convert feed into meat, presenting carcasses within quality standards. © 2012 Elsevier Ltd.

Carcass and meat quality traits of rabbits under heat stress

Rabbits are very sensitive to heat stress because they have difficulty eliminating excess body heat. The objective of the current study was to evaluate the effects of heat stress on slaughter weight, dressing percentage and carcass and meat quality traits of rabbits from two genetic groups. Ninety-six weaned rabbits were used: half were from the Botucatu genetic group and half were crossbreds between New Zealand White sires and Botucatu does. They were assigned to a completely randomized design in a 2 × 3 factorial arrangement (two genetic groups and three ambient temperatures: 18°C, 25°C and 30°C) and kept under controlled conditions in three environmental chambers from 5 to 10 weeks of age. Slaughter took place at 10 weeks, on 2 consecutive days. Meat quality measurements were made in the longissimus muscle. Actual average ambient temperature and relative humidity in the three chambers were 18.4°C and 63.9%, 24.4°C and 80.2% and 29.6°C and 75.9%, respectively. Purebred rabbits were heavier at slaughter and had heavier commercial and reference carcasses than crossbreds at 30°C; however, no differences between genetic groups for these traits were found at lower temperatures. No genetic group × ambient temperature interaction was detected for any other carcass or meat quality traits. The percentages of distal parts of legs, skin and carcass forepart were higher in crossbred rabbits, indicating a lower degree of maturity at slaughter in this group. The percentage of thoracic viscera was higher in the purebreds. Lightness of the longissimus muscle was higher in the purebreds, whereas redness was higher in the crossbreds. Slaughter, commercial and reference carcass weights and the percentages of thoracic viscera, liver and kidneys were negatively related with ambient temperature. Commercial and reference carcass yields, and the percentage of distal parts of legs, on the other hand, had a positive linear relationship with ambient temperature. Meat redness and yellowness diminished as ambient temperature increased, whereas cooking loss was linearly elevated with ambient temperature. Meat color traits revealed paler meat in the purebreds, but no differences in instrumental texture properties and water-holding capacity between genetic groups. Purebred rabbits were less susceptible to heat stress than the crossbreds. Heat stress resulted in lower slaughter and carcass weights and proportional reductions of organ weights, which contributed to a higher carcass yield. Moreover, it exerted a small, but negative, effect on meat quality traits. © 2012 The Animal Consortium.

Expression of genes related to quality of Longissimus dorsi muscle meat in Nellore (Bos indicus) and Canchim (5/8 Bos taurus×3/8 Bos indicus) cattle

This study was performed to compare CAPN1, CAPN2, CAST, TG, DGAT1 and LEP gene expressions and correlate them with meat quality traits in two genetic groups (Nellore and Canchim) in order to assess their expression profile and use their expression profile as genetic markers. We analyzed 30 young bulls (1. year old), 15 of each genetic group. Samples of the Longissimus dorsi muscle were collected for analysis of: total lipids (TL) and meat tenderness measured as Warner-Bratzler shear force (SF) and myofibrillar fragmentation (MFI) at day of slaughter and 7. days of aging. Gene expression profiles were obtained via RT-qPCR. TL and MFI showed differences between breeds, higher MFI in Canchim and higher TL in Nellore. Calpains showed no differential expression between groups, as did DGAT1, TG, and LEP. CAST was expressed more in the Nellore cattle. The only significant within-breed correlation (0.79) between gene expression and meat traits was found for DGAT1 and MFI in Canchim breed. Although the number of animals used in this study was small, the results indicate that the increased expression of CAST in Nellore may reflect tougher meat, but the lack of correlations with the meat traits indicates it is not a promising genetic marker. © 2013 Elsevier Ltd.

Optimization of the surimi production from Mechanically Recovered Fish Meat (MRFM) using response surface methodology

The by-products generated from industrial filleting of tilapia surimi can be used for the manufacture of surimi. The surimi production uses large amounts of water, which generates a wastewater rich in organic compounds (lipids, soluble proteins and blood). Optimizing the number of washing cycles will contribute to a more sustainable production. A mathematical model of mechanically recovered tilapia meat (Oreochromis niloticus) for the processing of surimi (minced fish washing cycles and tapioca starch addition) based on two quality parameters (texture and moisture) was constructed by applying the response surface methodology (RSM). Each factor had an important effect on the moisture and texture of surimi. This study found that the optimal formulation for producing the best surimi using the by-products of tilapia filleting in manufacturing fish burger were the addition of 10% tapioca starch and three minced fish washing cycles. A microstructural evaluation supported the findings of the mathematical model. Practical Applications: The use of mechanically recovered fish meat (MRFM) for the production of surimi enables the utilization of the by-products of filleting fish. However, the inferior quality of the surimi produced from MRFM in relation to that produced with fillets necessitates the addition of starch; secondly, surimi production consumes a large volume of water. RSM provides a valuable means for optimizing the number of washing cycles and starch amounts utilized in fish burger production. Tapioca starch, widely produced in Brazil, has desirable characteristics (surface sheen, smooth texture, neutral taste and clarity in solution) for use in MRFM-produced surimi. © 2013 Wiley Periodicals, Inc.

Meat and carcass traits of the red-winged tinamou (Rhynchotus rufescens)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of pre-slaughter fasting on broiler welfare, meat quality, and intestinal integrity

The Brazilian Ministry of Agriculture (MAPA) regulations establish 12 hours as the maximum pre-slaughter fasting period for broilers; however, many processing plants have considered this time is not sufficient, and consequently return the birds to the farms, with consequent economic losses and welfare problems. Therefore, it is necessary to investigate the possible effects of longer pre-slaughter fasting times. The objective of the present study was to evaluate the effect of pre-slaughter fasting times longer than those established by MAPA on broiler welfare, breast meat quality, and intestinal integrity. Forty 42-d-old broilers were submitted to different pre-slaughter fasting times: group I: 6 hours, group II 9h, group III 12h, and group IV 15h. Bird welfare was assessed before slaughter. After sacrifice, intestinal samples were collected to assess their morphology and morphometrics, and the Pectoralis major muscle was analyzed for pH and color. There was no influence (p>0.05) of treatments on breast muscle pH or color.There were no significant changes in intestinal morphometrics (p<0.05). Bird behavior was affected (p<0.05), suggesting that welfare was impaired as fasting time increased, but no differences in the analyzed parameters were detected between broilers fasted for 12 or 15 hours. It was concluded that the behavioral differences between birds fasted for 12 and 15 hours are not sufficient to assert that those fasted for 15 hours were in worse welfare conditions.