Analise da postura pela fotogrametria em escolares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

CALIBRAÇÃO DE UM REFLECTÔMETRO PARA ESTUDOS DO FLUXO DE ÁGUA EM SOLO NÃO SATURADO

Este trabalho trata sobre a calibração de um aparelho baseado na técnica TDR para estudos do fluxo de água em solo não saturado, com base na medição indireta da umidade, sucção matricial (ψ) e condutividade hidráulica não saturada k(ψ), num perfil de solo inalterado. Isto é possível mediante ensaios de laboratório decorrentes da mecânica de solos tradicional e não saturada, a partir de amostras indeformadas retiradas a diferentes profundidades durante a construção de um poço, onde foram instaladas as sondas do TDR. Dos ensaios, obtiveram-se equações polinomiais para relacionar o comportamento da variação do período de tempo do pulso eletromagnético percorrido pela sonda TDR com a variação da umidade do solo e modelos de van Genuchten (1980) para relacionar a umidade com (ψ) e k(ψ). Os resultados mostraram que, para a calibração da umidade neste tipo de solos, um ajuste polinomial de quarto grau se apresenta como melhor alternativa em relação às expressões existentes em lugares onde foram derivadas estas teorias. Adicionalmente, se observou, que as maiores variações de (ψ) e k(ψ). ocorrerão entre a saturação e 10% de umidade devido à peculiaridade da curva de retenção. Finalmente, a presente calibração se apresenta como um expediente útil e prático para estudos hidrodinâmicos de solos não saturados. Palavras-chave: calibração, reflectômetro, teor de umidade, solo não saturado.

Efeitos de descontinuidades na propagação de ondas em estruturas unidimensionais

Pós-graduação em Engenharia Mecânica - FEIS

Large-Area Plasmonic Substrate of Silver-Coated Iron Oxide Nanorod Arrays for Plasmon-Enhanced Spectroscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biofertilizantes: nutrição e desenvolvimento de tomate orgânico

Pós-graduação em Agronomia (Horticultura) - FCA

Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments

Statement of problem. Removable partial dentures are affected by fatigue because of the cyclic mechanism of the masticatory system ansi frequent insertion and removal. Titanium and its alloys have been used in the manufacture of denture frameworks; however, preventive agents with fluorides are thought to attack titanium alloy surfaces.Purpose. This study evaluated, compared, analyzed the corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloy in different storage environments.Material and methods. For each metal, 33 dumbbell rods, 2.3 mm in diameter at the central segment, were cast in the Rematitan system. Corrosion-fatigue strength test was carried out through a universal testing machine with a load 30% lon er than the 0.2% offset yield strength and a combined influence of different: environments: in air at room temperature, with synthetic saliva, and with fluoride synthetic saliva. After failure, the number of cycles were recorded, and fracture surfaces were examined with on SEM.Results. ANOVA and Tukey's multiple comparison rest indicated that Ti-6Al-4V alloy achieved 21,269 cycles (SD = 8,355) against 19,157 cycles (SD = 3,624) for the commercially purr Ti. There were no significant differences between either metal in the corrosion-fatigue life for dry specimens, but when the solutions were present, the fatigue life was significantly reduced, probably because of the product-ion of corrosion pits caused by superficial reactions.

Efficacy of antibiotic therapy for peritoneal dialysis-associated peritonitis: a proportional meta-analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

LASIODERMA SERRICORNE (COLEOPTERA: ANOBIIDAE) IN STORED MATRICARIA RECUTITA (ASTERACEAE) IN BRAZIL

Insects pests of stored products and by-products are extending their feeding preferences to new items. We report for the first time in Brazil the feeding and reproduction of the cigarette beetle, Lasioderma serricorne F. (Coleoptera: Anobiidae) on stored chamomile, Matricaria recutita L. (Asteraceae). One intact package (10 cm wide x 15 cm long) of M. recutita infested by L. serricorne was purchased in a supermarket in Vicosa, Minas Gerais, Brazil. In this sample this insect had fed on the dried parts (inflorescences and rods), which made the product unfit for human consumption. This 20 g sample included 101 live and 4 dead Lasioderma serricorne. Circumstantial evidence suggested that the infested material was probably harvested from an infested field in Apr 2013 and packaged with L. serricorne eggs, and that these had developed into the adults found in the package.

Projeto de um dispositivo para prensar bobinas polares de pólos salientes para hidrogeradores

The increasing demand for productivity and quality in companies has converged to a common point: reducing costs. In this context the present work aims at the development of a mechanical press which is designed for pressing polar hydrogenerators coils with salient pole in field facilitating the assembly of the poles in the plant, as well as reforms especially in hydrogenerators, reducing significantly the transport costs. With security in mind as well as reduced costs, a study was made of the materials to be used as it was applied a methodology for calculating the correct choice of safety factor to be used in the device. Through mechanical calculations were dimensioned critical items of the device as the diameter of the rods as well as the minimum thickness of the base of the device must have so that it does not break threaded shear in the region by applying the total load of traction on the risers implementation of the pressing. All compression loading device will be through the application of torque on the nuts of bolts in this way was defined by calculations the required torque for each nut so that you can reach the pressure specified in the design specifies. The modeling of the device was made using the INVENTOR™ program in conjunction with the program ANSYS ™. These programs have created designs in three dimensions, assembly and simulation of stress analysis in components of the device

Salmonela em carcaça de aves

The genus Salmonella was characterized in 1885. It is divided into two species and six subspecies or subgenera. Belonging to the family Enterobacteriaceae is composed of Gram-negative rods, usually producing mobile gas from glucose, except in those serovars S. gallinarum and S. Pullorum. Salmonela is one of the biggest problems in public health for its wide occurrence in humans and in animals, where they occupy the center of the epidemiology of enteric salmonelosis. These are responsible for significant rates of morbidity and mortality. Several outbreaks of food transmitted diseases are described involving meat birds. Sources of salmonela in broiler chicks infected stem, feed and farm environment. Currently, S. enteritidis and S. typhimurium are the two most prevalent serovars. In this context, the sum is increased resistance to antimicrobial drugs is including the latest generation of its indiscriminate use in veterinary medicine. This fact represents risk to human and animal health. New strategies have been adopted by the Brazilian poultry industry to control salmonela in broilers, but the contamination by this pathogen is still present in slaughterhouses putting public health at risk

Caracterização do defeito tipo trinca de laminação, ocorrido no processo de laminação de barras de aço

The mechanical forming processes are the main means of transformation. Among all processes, the most used is rolling and broken down into flat and non-flat products. In the flat products are classified plates, and products no plans bars and profiles. Thus laminating products, mostly, are the raw materials for other processes of transformation, as stamping, forging, machining, bending and more. This work has focused on non-flat products, classified as bars and rods, watching a key point in the proceedings that is the product quality. Here is demonstrated through metallographic analysis of steel bars, hot-rolled, the characteristics of surface cracks in these bars

Previsão do comportamento de estruturas de contenção atirantadas utilizando o software FTOOL

Population growth, together with the gradual social ascent in Brazil, reflects at the growing need for better use of urban spaces. In this context, the amount of new buildings to meet the demand in property market, the needs for creating new roads and highways, among others, make the use of geotechnical works and, more specifically, retaining walls, more and more common. One of the simplest solutions for underground works is the use of retaining structures using tie back walls for soil support, therefore, the present work deals with this kind of structures. This paper proposes the use of FTOOL software testing in predicting deformations in tie back walls, by comparing simulations of the presented model to a real and measured deformation case in Guabirotuba Formation (PR). The results showed the importance of defining the parameters such as stiffness and curtain geometry, as well as the definition of representative loads acting on it. Also, it was pointed out that the passive response of the steel rods depends on the horizontal displacement of the wall. The study concluded that the program generates very representative results when compared to field data and seems to be a promising tool for tie back structures displacement predictions

Velocidade de semeadura e profundidade da haste em sistema plantio direto de milho e soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Bioconversion of Cellulose to Hydrogen by dark fermentation

Hydrogen is known as a clean energy resource. The biological production of hydrogen has been attracting attention as an environmentally friendly processs that does not consume fossil fuels. Cellulosic plant and waste materials are potential resources for fermentative hydrogen production. Cellulose is a linear biopolymer of glucose molecules, connected by β-1,4-glycosidic bonds. Enzymatic hydrolysis of cellulose requires the presence of cellulase. The present study aimed to investigate the efficiency of acid pretreatment on ruminal fluid in order to enrich H2 producing bacteria consortia to enhance biohydrogen rate and substrate removal efficiency. In this study, fermentative hydrogen producers were enriched on cellulose (2g/L) in a modificated Del Nery medium (DNM) at 37ºC and initial pH 7.0 using rumen fluid (10% v/v) as inoculum. To increase the hydrogen production it was added cellulose (10mL) to the medium. The gas products (mainly H2 and CO2) was analyzed by gas chromatography (Shimadzu GC 2010) using a thermal conductivity detector. The volatile fatty acids and ethanol were also detected by GC using a flame ionization detector. Cellulose degradation was quantified by using the phenolsulfuric acid method. Analysis showed that the biogas produced from the anaerobic fermentation contained only hydrogen and carbon dioxide, without detectable methane after acid pretreatment test. On DNM the hydrogen production started with 4 h (5,3 x 105 mmol H2/L) of incubation, and the maximum H2 concentration was observed with 34 h (7,1 x 106 mmol H2/L) of incubation. During the process, it was observed a predominance of acetic acid and butyric acid as well as a low production of acetone, ethanol and nbutanol in all experimental phases. Butyrate accounted for more than 77% of total. As a result of the accumulation of volatile fatty acids (VFAs), the pH value in anaerobic digestion system was reduced to 4,0. On microscopy analyses there were observed rods with endospores. The batch anaerobic fermentation assays performed on anaerobic mixed inoculum from rumen fluid demonstrated the feasibility of H2 generation utilizing cellulose as substrate. Based on the results, it can be concluded that the acid treatment was efficient to inhibit the methanogenic archaea cells present in rumen fluid. The rumen fluid cells present a potential route in converting renewable biomass such as cellulose into hydrogen energy.

Biological Hydrogen production from environmental sample in tropical countries

The hydrogen gas is regarded as clean and renewable energy source, since it generates only water during combustion when used as fuel. It shows 2.75 times more energy content than any hydrocarbon and it can be converted into electrical, mechanical energy or heat. Inoculum sources have been successfully tested for hydrogen biological production in temperate climate countries as sludge treatment plants sewage, sludge treatment plant wastewater, landfill sample, among others. However, hydrogen biologic production with inoculum from environmental samples such as sediment reservoirs, especially in tropical countries like Brazil, is rarely investigated. Reservoirs and fresh water lake sediment may contain conditions for the survival of a wide variety of microorganisms which use different carbon sources mainly glucose and xylose, in the fermentation. Glucose is an easily biodegradable, present in most of the industrial effluents and can be obtained abundantly from agricultural wastes. A wide variety of wastewater resulting from agriculture, industry and pulp and paper processed from wood may contain xylose in its constitution. Such effluent contains glucose and xylose concentrations of about 2 g/L. In this sense, this work verified hydrogen biological production in anaerobic batch reactor (1L), at 37 ° C, initial pH 5.5, headspace with N2 (100%), Del Nery medium, vitamins and peptone (1 g/L), fed separately with glucose (2g/L) and xylose (2 g/L). The inoculum was taken from environmental sample (sediment reservoir Itupararanga - Ibiúna - SP-Brazil). It was previously purified in serial dilutions at H2 generation (10-5, 10-7, 10-10), and heat treated (90º C - 10 min) later to inhibited the H2 consumers. The maximum H2 generations obtained in both tests were observed at 552 h, as described below. At the reactors fed with glucose and xylose were observed, respectively, 9.1 and 8.6 mmol H2/L, biomass growth (0.2 and 0.2 nm); consumption of sugar concentrations 53.6% (1.1 glucose g/L) and 90.5% (1.8 xylose g/L); acetic acid generation (124.7 mg/L and 82.7 mg/L), butyric acid (134.0 mg/L and 230.4 mg/L) and there wasn’t methane generation in the reactors. Microscopic analysis of biomass in anaerobic reactors showed the predominance of Gram positive rods and rods with endospores, whose morphology is characteristic of H2-generating bacteria, in both tests. These species were selected from the natural environment. In DGGE analysis performed difference were observed between populations from inoculum and in tests. This analysis confirmed that some species of bacteria were selected which remained under the conditions imposed on the experiment. The efficiency of the pre-treatment of inoculum and the imposition of pH 5.5 inhibited methane-producing microorganisms and the consumers of H2. Therefore, the experimental conditions imposed allowed the attainment of bacterial consortium of producer H2 taken from an environmental sample with concentration of xylose and glucose similar to the ones of the industrial effluents.