An evaporative and desiccant cooling system for air conditioning in humid climates

Evaporative cooling operates using water and air as working fluids. It consists in water evaporation, through the passage of an airflow, thus decreasing the air temperature. This system has a great potential to provide thermal comfort in places where air humidity is low, being, however, less efficient where air humidity is high. A way to solve this problem is to use dehumidifiers to pre-conditioning the process air. This paper presents a system that can be used in humid climates coupling desiccant dehumidification equipment to evaporative coolers. The paper shows, initially, the main characteristics of the evaporative cooling and of the adsorption dehumidification systems. Later on the coupled systems, in which occurs a dehumidification by adsorption in a counter flow rotary heat exchanger following the evaporate cooling of the air in evaporative coolers, are analyzed. The thermodynamic equations of state are also presented. Following, this paper analyzes some operation parameters such as: reactivation temperature, R/P relationship (reactivation air flow/ process air flow) and the thermodynamic conditions of the entering air flow. The paper shows the conditions for the best operation point, with regard to thermal comfort conditions and to the energy used in the process. In addition this paper presents an application of the system in different climate characteristics of several tropical and equatorial cities. Copyright © 2005 by ABCM.

Effect of topical application of 5-FU on the corneoscleral limbus of rabbits

• Aim: To observe the effects of topical application of 5-fluorouracil (5-FU) on the rabbits corneal limbus. • Methods: 5-FU was applied topically to the corneoscleral region of rabbits eyes. The animals were sacrificed immediately or 7, 15, 30 and 60 days later, and tissues were submitted to histological examination. • Results: All animals presented corneoscleral deepithelization close to the site of application during the immediate post-operative period, whereas on the 4th postoperative day ulceration was no longer present. Histological examination showed absence of epithelium and slight edema. After one week (G2), 2 animals presented epithelial defects, thickened epithelium with larger basal cells and loose chromatin, and slight subepithelial edema. The remaining groups showed no alterations. • Conclusion: The 5-FU topically on the corneoscleral limbus postpone the epitelization.

Grinding of hardened steels using optimized cooling

Grinding - the final machining process of a workpiece - requires large amounts of cutting fluids for the lubrication, cooling and removal of chips. These fluids are highly aggressive to the environment. With the technological advances of recent years, the worldwide trend is to produce increasingly sophisticated components with very strict geometric and dimensional tolerances, good surface finish, at low costs, and particularly without damaging the environment. The latter requirement can be achieved by recycling cutting fluids, which is a costly solution, or by drastically reducing the amount of cutting fluids employed in the grinding process. This alternative was investigated here by varying the plunge velocity in the plunge cylindrical grinding of ABNT D6 steel, rationalizing the application of two cutting fluids and using a superabrasive CBN (cubic boron nitride) grinding wheel with vitrified binder to evaluate the output parameters of tangential cutting force, acoustic emission, roughness, roundness, tool wear, residual stress and surface integrity, using scanning electron microscopy (SEM) to examine the test specimens. The performance of the cutting fluid, grinding wheel and plunge velocity were analyzed to identify the best machining conditions which allowed for a reduction of the cutting fluid volume, reducing the machining time without impairing the geometric and dimensional parameters, and the surface finish and integrity of the machined components.

Efficacy of topical permethrin as repellent against aedes aegypti's bites

Mosquitoes are the most important vectors of infectious diseases and their bites are related to several adverse skin reactions. Permethrin impregnated clothes are an efficient strategy against arthropods' bites; however, its topical efficacy as a repellent has not been well established. We studied the response to permethrin lotion 5 percent and N,N-Diethyl-meta-toluamide (DEET) spray 50 percent applied to the unprotected forearms of 10 volunteers. Each arm was exposed to 20 female mosquitoes of Aedes aegypti. We performed 71 bilateral comparative measurements evaluating the timing for the first bites. The average times for the arm without the product, with permethrin 5 percent, and with DEET 50 percent were: 7.9 seconds, 336.2 seconds and 7512.1 seconds. The results showed a significant difference between repellency times between either product and unprotected controls. In addition, there was a significant difference in time to first bite between permethrin and DEET treated arms (p<0.01). Permethrin affords some repellent activity against Aedes aegypti bites in this experimental setting. However, permethrin's profile of repellency was significantly inferior to that of DEET. © 2008 Dermatology Online Journal.

Power losses analysis and cooling system design of three topologies of multilevel inverters

This paper presents the comparison of three topologies of multilevel inverters applied to drive an induction motor of 500 kVA/4.16 kV. The multilevel inverters analyzed are: a neutral point clamped inverter, a symmetrical cascaded multilevel inverter and a hybrid asymmetrical cascaded multilevel inverter. The performance indexes used in the comparison are total harmonic distortion, first order distortion factor, semiconductors power losses distribution and heat-sink volume. The comparison is developed with the purpose of finding the efficiency and the heat-sink volume where the three systems present the same output filter. ©2008 IEEE.

Immunohistochemical expression of HLA-DR in the conjunctiva of patients under topical prostaglandin analogs treatment

PURPOSE: Subclinical inflammation may be observed in patients using topical antiglaucomatous drugs. The objective of this study was to investigate inflammation in conjunctiva of glaucoma patients using prostaglandin analogs, by the detection of an immunogenetic marker (HLA-DR) and compare the effect of 3 different drugs: latanoprost, bimatoprost, and travoprost in the induction of this inflammation. SUBJECTS AND METHODS: Thirty-three patients with primary open-angle glaucoma were evaluated without and with prostaglandin analogs topical therapy. Imprints of conjunctival cells were obtained, fixed on glass slides, and prepared for immunohistochemical analysis. RESULTS: Before the use of prostaglandin analogs, 4 of the 33 patients evaluated presented expression of HLA-DR in the conjunctiva (mild). After 1 month on prostaglandin analog treatment, all but 1 patient presented HLA-DR staining. HLA-DR expression of these 32 patients was scored as mild (19 patients), medium (11 patients), or intense (2 patients). The differences were statistically significant both when the presence and the increased expression of HLA-DR were considered (P<0.001). When the 3 different groups were analyzed (latanoprost, bimatoprost, and travoprost) no statistically significant difference was found (P=0.27). CONCLUSIONS: The use of prostaglandin analogs eye drops provokes a subclinical inflammatory reaction, observed by HLA-DR expression, even after a short period of treatment, independently of the class of the prostaglandin analogs used. © 2009 Lippincott Williams & Wilkins, Inc.

Topical Calendula officinalis L. successfully treated exfoliative cheilitis: A case report

Authors describe a case of recurrent exfoliative cheilitis that responded to treatment with a standardized topical preparation of Calendula officinalis L. An eighteen-year-old man was referred to UNESP - São Paulo State University, Department of Biosciences and Oral Diagnosis, São José dos Campos Dental School to investigate a chronic dry scaling lesion on his lips. The patient's main chief was aesthetic compromising. Corticoid therapy was suspended and Calendula officinalis ointment 10% for ad libitum use has been prescribed. The results presented allow the authors to consider Calendula officinalis L. as a potential therapy in cases of cheilitis exfoliative. © 2009 Roveroni-Favaretto et al; licensee BioMed Central Ltd.

Topical use of fluorides for caries control

Since the early findings on the protective effects of fluoride present in drinking water upon caries incidence and prevalence, intensive research has been conducted in order to determine the benefits, safety, as well as the cost-effectiveness of other modalities of fluoride delivery. The present chapter reviews the various forms of topical fluoride use - professionally and self-applied - with special emphasis on clinical efficacy and possible side effects. The most widely used forms of fluoride delivery have been subject of several systematic reviews, providing strong evidence supporting the use of dentifrices, gels, varnishes and mouth rinses for the control of caries progression. Dentifrices with fluoride concentrations of 1,000 ppm and above have been shown to be clinically effective in caries prevention when compared to a placebo treatment, but the evidence regarding formulations with 450-550 ppm is still subject of debate. Therefore, the recommendation for low-fluoride dentifrice use must take into account both risks and benefits. The evidence for the combined use of two modalities of fluoride application in comparison to a single modality is still inconsistent, implying that more studies with adequate methodology are needed to determine the real benefits of each method. Considering the currently available evidence and risk-benefit aspects, it seems justifiable to recommend the use of fluoridated dentifrices to individuals of all ages, and additional fluoride therapy should also be targeted towards individuals at high caries risk. © 2011 S. Karger AG, Basel.

Influence of optimized lubrication-cooling and minimum quantity lubrication on the cutting forces, on the geometric quality of the surfaces and on the micro-structural integrity of hardened steel parts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of a topical formulation containing S. Lutea extract: Stability, in vitro studies and cutaneous permeation

Flavonoids have been widely incorporated into cosmetic and dermatological formulations, affording benefits such as antioxidant action, improved skin tone and fewer lines and wrinkles. Brazil has a huge biodiversity, with one of the richest flora in the world, and existing studies justify the quest for greater research efforts in this area. The cajazeira (Spondias lutea L.), a plant of the Anacardiaceae family from tropical America, is widely disseminated in Brazil. This plant was chosen because of the presence of flavonoids that exhibit antioxidant activity. The purpose of this research was to develop a stable topical formulation containing Spondias lutea extract with the aim of preventing skin diseases caused by UV radiation. Hydro ethanolic extract of Spondias lutea fruit was prepared and assayed for its the flavonoids content. The antioxidant activity was estimated by DPPH and superoxide assay. The physicochemical stability and skin permeation of the cream containing 8% (w/w) of extract were assessed. The results showed that the S. lutea extract possessed antioxidant activity, and that it is possible to obtain a stable cosmetic containing the extract, which is able to penetrate the skin. Thus, it is possible to use this extract to produce an anti-aging cosmetic.

Analysis on turning Ti-6Al-4V with different cooling methods

The aim of this paper is to optimize the machining of Ti-6Al-4V alloy, by studying the chip formation, roughness and tool wear for different cooling conditions. The results were compared between cooling methods, minimal quantity of fluid (MQF) and flooding, and also without fluid for the tool H13A. The turning of Ti-6Al-4V has shown good results on roughness (0, 8μm) and tool life, which was 11% lower with MQF than with the flooding method. The tool wear causes variation of the shear angle, which promotes strength hardening of the chip. As a result, the machined surface could be damaged. The use of the cutting fluid helps to save the cutting edge and could reduce the strength hardening. Nevertheless, it could also facilitate the formation of built-up edge. The nucleation of alpha lamellar colonies can occur due to a combination of deformation rates and temperature, mainly when the flooding is used, but it's not conclusive. The lamellar colonies were also found with the MQF in some regions, however, this structure did not show hardness variation compared to equiaxial. For all this reasons, the machining parameters might be carefully chosen.

Effects of extreme cooling methods on mechanical properties and shear bond strength of bilayered porcelain/3Y-TZP specimens

Objectives: This study investigated the effect of extreme cooling methods on the flexural strength, reliability and shear bond strength of veneer porcelain for zirconia. Methods: Vita VM9 porcelain was sintered on zirconia bar specimens and cooled by one of the following methods: inside a switched-off furnace (slow), at room temperature (normal) or immediately by compressed air (fast). Three-point flexural strength tests (FS) were performed on specimens with porcelain under tension (PT, n = 30) and zirconia under tension (ZT, n = 30). Shear bond strength tests (SBS, n = 15) were performed on cylindrical blocks of porcelain, which were applied on zirconia plates. Data were submitted to one-way ANOVA and Tukey's post hoc tests (p < 0.05). Weibull analysis was performed on the PT and ZT configurations. Results: One-way ANOVA for the PT configuration was significant, and Tukey's test revealed that fast cooling leads to significantly higher values (p < 0.01) than the other cooling methods. One-way ANOVA for the ZT configuration was not significant (p = 0.06). Weibull analysis showed that normal cooling had slightly higher reliability for both the PT and ZT configurations. Statistical tests showed that slow cooling decreased the SBS value (p < 0.01) and showed less adhesive fracture modes than the other cooling methods. Clinical Significance: Slow cooling seems to affect the veneer resistance and adhesion to the zirconia core; however, the reliability of fast cooling was slightly lower than that of the other methods. © 2013 Elsevier Ltd.

Topical application of the lectin Artin M accelerates wound healing in rat oral mucosa by enhancing TGF-β and VEGF production

The lectin Artin M has been shown to accelerate the wound-healing process. The aims of this study were to evaluate the effects of Artin M on wound healing in the palatal mucosa of rats and to investigate the effects of Artin M on transforming growth factor beta (TGF-β) and vascular endothelial growth factor (VEGF) secretion by rat gingival fibroblasts. A surgical wound was created on the palatal mucosa of 72 rats divided into three groups according to treatment: C - Control (nontreated), A - Artin M gel, and V - Vehicle. Eight animals per group were sacrificed at 3, 5, and 7 days postsurgery for histology, immunohistochemistry and determination of the levels of cytokines, and growth factors. Gingival fibroblasts were incubated with 2.5 μg/mL of Artin M for 24, 48, and 72 hours. The expression of VEGF and TGF-β was determined by enzyme-linked immunosorbent assay. Histologically, at day 7, the Artin M group showed earlier reepithelialization, milder inflammatory infiltration, and increased collagen fiber formation, resulting in faster maturation of granular tissue than in the other groups (p < 0.05). Artin M-induced cell proliferation in vivo and promoted a greater expression of TGF-β and VEGF in both experiments (p < 0.05). Artin M was effective in healing oral mucosa wounds in rats and was associated with increased TGF-β and VEGF release, cell proliferation, reepithelialization, and collagen deposition and arrangement of fibers. © 2013 by the Wound Healing Society.

Cooling of ejaculated and epididymal stallion sperm

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Storage of 'Espada' mango fruits in modified atmosphere and cooling: effects on conservation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)