Study of direct CP violation in B±→J/ ψK±(π±) decays

We present a search for direct CP violation in B±→J/ ψK±(π±) decays. The event sample is selected from 2.8fb-1 of pp̄ collisions recorded by D0 experiment in run II of the Fermilab Tevatron Collider. The charge asymmetry ACP(B+→J/ψK+)=+0.0075±0. 0061(stat)±0.0030(syst) is obtained using a sample of approximately 40000 B±→J/ψK± decays. The achieved precision is of the same level as the expected deviation predicted by some extensions of the standard model. We also measured the charge asymmetry ACP(B+→J/ψπ+)=-0. 09±0.08(stat)±0.03(syst). © 2008 The American Physical Society.

Tamanho da amostra foliar para avaliação do estado nutricional de goiabeiras com e sem irrigação

The ideal size precision of the foliar sample determines manual work optimization, and also diminishes inherent errors in diagnosis reports of nutritional state. This work aimed to determine the size of the foliar samples and the sample error variation in guava plantations submitted to two hydric cultivations for the nutritional state diagnosis of this fruit. The work included two studies, both under an entirely randomized experimental design. Study 1 was carried out in an orchard under unirrigated cultivation with four treatments and six repetitions that consisted of leaf collection in 5, 10, 20 and 40 plants. Study 2 was carried out in an orchard under irrigated cultivation with five treatments and 10 repetitions that consisted of leaf collection in 10, 20, 30, 40 and 50 guava plants. It was concluded that in unirrigated orchards it is necessary to sample leaves in 40 plants in order to keep the macronutrients sample error between 5 to 10%. For the micronutrients, on the other hand, at least 40 plants were necessary and, if Fe and Zn were considered, the sample must be even larger. In irrigated orchards, leaves deriving from 10 plants were enough to keep the sample error between 5 to 10%. However, considering the micronutrients, it was necessary to sample 20 guava plants.

Mechanical behavior of isolated intervertebral disc

The study on several components of intervertebral joints is essential to understand the spine's degenerative mechanisms and to assess the best method for their treatment. For such study it is necessary to know the mechanical properties of the isolated intervertebral disc (ID) mechanical properties and, it is necessary to evaluate its stresses and strains. In order to assess the ID displacements, a fine, U-shaped blade was developed, over which two extensometers connected in a Wheatstone bridge were placed. The device was then tested on porcine spine ID, where compression loads were applied and the extremities displacements of the blade coupled to the intervertebral disc were measured. Stress/strain diagram, both on the compression and on the decompression phases, evidencing the non-linear nature of such relationship. With the experiment, it was possible to obtain approximate values of the longitudinal elasticity module (E) of the disc material and of the Poisson coefficient (n ). After several tests, E results are compatible with those obtained by others studies, with very simple and low-cost device. This experiments can be used for obtained others mechanical properties of isolated ID with precision and accuracy.

Commissioning of the CMS experiment and the cosmic run at four tesla

The CMS Collaboration conducted a month-long data-taking exercise known as the Cosmic Run At Four Tesla in late 2008 in order to complete the commissioning of the experiment for extended operation. The operational lessons resulting from this exercise were addressed in the subsequent shutdown to better prepare CMS for LHC beams in 2009. The cosmic data collected have been invaluable to study the performance of the detectors, to commission the alignment and calibration techniques, and to make several cosmic ray measurements. The experimental setup, conditions, and principal achievements from this data-taking exercise are described along with a review of the preceding integration activities. © 2010 IOP Publishing Ltd and SISSA.

Aligning the CMS muon chambers with the muon alignment system during an extended cosmic ray run

The alignment system for the muon spectrometer of the CMS detector comprises three independent subsystems of optical and analog position sensors. It aligns muon chambers with respect to each other and to the central silicon tracker. System commissioning at full magnetic field began in 2008 during an extended cosmic ray run. The system succeeded in tracking muon detector movements of up to 18 mm and rotations of several milliradians under magnetic forces. Depending on coordinate and subsystem, the system achieved chamber alignment precisions of 140-350 μm and 30-200 μrad, close to the precision requirements of the experiment. Systematic errors on absolute positions are estimated to be 340-590 μm based on comparisons with independent photogrammetry measurements. © 2010 IOP Publishing Ltd and SISSA.

Análise espacial de nutrientes e produção de alface cultivada em ambiente protegido

The objective of this work was to study spatial variability of some chemical soil attributes and lettuce production (total shoot fresh matter mass - MF; commercial shoot fresh matter mass - MFC; commercial shoot dry matter mass - MCS; and head commercial diameter - DCC) offering subsidies to the protected environment mapping in nutrients management areas in lettuce culture aiming for a higher productivity with application of fertilizers. The experiment was conducted in a protective environment (greenhouse) with lettuce irrigated by drip irrigation and sampling grid with 152 points. The special dependence analysis, determined by the variogram, was obtained with the aid of the GS+ Program. Considering the need for crop nutrients through the map obtained for element P (phosphorus) it was possible to establish two distinct areas for the application of this element in plantation fertilization. Through the lettuce yield maps obtained with MFC and DCC attributes was difficult to establish distinct areas for its management with data observed in only one crop cycle. Krigagem has proved useful for mapping the attributes studied.

Galileo's surveying potential E5 pseudorange precision

New Galileo signals have great potential for pseudorange-based surveying and mapping in both optimal open-sky conditions and suboptimal under-canopy environments. This article reviews the main features of Galileo's E5 AItBO( and El (BOC signals, describes generation of realistic E5 and El pseudoranges with and without multipath sources, and presents anticipated horizontal positioning accuracy results, ranging from 4 centimeters (open-sky) to 14 centimeters (under-canopy) for E5/El.

Development of sustainable precision farming systems for swine: Estimating realtime individual amino acid requirements in growing-finishing pigs

The objective of this study was to develop and evaluate a mathematical model used to estimate the daily amino acid requirements of individual growing-finishing pigs. The model includes empirical and mechanistic model components. The empirical component estimates daily feed intake (DFI), BW, and daily gain (DG) based on individual pig information collected in real time. Based on DFI, BW, and DG estimates, the mechanistic component uses classic factorial equations to estimate the optimal concentration of amino acids that must be offered to each pig to meet its requirements. The model was evaluated with data from a study that investigated the effect of feeding pigs with a 3-phase or daily multiphase system. The DFI and BW values measured in this study were compared with those estimated by the empirical component of the model. The coherence of the values estimated by the mechanistic component was evaluated by analyzing if it followed a normal pattern of requirements. Lastly, the proposed model was evaluated by comparing its estimates with those generated by the existing growth model (InraPorc). The precision of the proposed model and InraPorc in estimating DFI and BW was evaluated through the mean absolute error. The empirical component results indicated that the DFI and BW trajectories of individual pigs fed ad libitum could be predicted 1 d (DFI) or 7 d (BW) ahead with the average mean absolute error of 12.45 and 1.85%, respectively. The average mean absolute error obtained with the InraPorc for the average individual of the population was 14.72% for DFI and 5.38% for BW. Major differences were observed when estimates from InraPorc were compared with individual observations. The proposed model, however, was effective in tracking the change in DFI and BW for each individual pig. The mechanistic model component estimated the optimal standardized ileal digestible Lys to NE ratio with reasonable between animal (average CV = 7%) and overtime (average CV = 14%) variation. Thus, the amino acid requirements estimated by model are animal- and time-dependent and follow, in real time, the individual DFI and BW growth patterns. The proposed model can follow the average feed intake and feed weight trajectory of each individual pig in real time with good accuracy. Based on these trajectories and using classical factorial equations, the model makes it possible to estimate dynamically the AA requirements of each animal, taking into account the intake and growth changes of the animal. © 2012 American Society of Animal Science. All rights reserved.

Remote laboratory experiment access via an RFID interface

In this paper, remote laboratory experiment access is considered through the use of radio frequency identification (RFID) technology. Contactless smart cards are used widely in many applications from travel cards through to building access control and inventory tracking. However, their use is considered here for access to electronic engineering experimentation in a remote laboratory setting by providing the ability to interface experiments through this contactless (wireless) connection means. A case study design is implemented to demonstrate such a means by incorporating experiment data onto a contactless smart card and accessing this via a card reader and web server arrangement. © 2012 IEEE.

Teaching and learning data structures supported by computers: An experiment using CADILAG tool

This paper aims to present the use of a learning object (CADILAG), developed to facilitate understanding data structure operations by using visual presentations and animations. The CADILAG allows visualizing the behavior of algorithms usually discussed during Computer Science and Information System courses. For each data structure it is possible visualizing its content and its operation dynamically. Its use was evaluated an the results are presented. © 2012 AISTI.

Practical comparisons among electronic energy meters, a precision energy meter and IEEE1459 for reactive energy measurements, under unbalanced and non-sinusoidal conditions

This paper presents a practical experimentation for comparing reactive/non-active energy measures, considering three-phase four-wire non-sinusoidal and unbalanced circuits, involving five different commercial electronic meters. The experimentation set provides separately voltage and current generation, each one with any waveform involving up to fifty-first harmonic components, identically compared with acquisitions obtained from utility. The experimental accuracy is guaranteed by a class A power analyzer, according to IEC61000-4-30 standard. Some current and voltage combination profiles are presented and confronted with two different references of reactive/non-active calculation methodologies; instantaneous power theory and IEEE 1459-2010. The first methodology considers the instantaneous power theory, present into the advanced mathematical internal algorithm from WT3000 power analyzer, and the second methodology, accomplish with IEEE 1459-2010 standard, uses waveform voltage and current acquisition from WT3000 as input data for a virtual meter developed on Mathlab/Simulink software. © 2012 IEEE.

Monitoring in precision metal drilling process using multi-sensors and neural network

This paper presents a new method to estimate hole diameters and surface roughness in precision drilling processes, using coupons taken from a sandwich plate composed of a titanium alloy plate (Ti6Al4V) glued onto an aluminum alloy plate (AA 2024T3). The proposed method uses signals acquired during the cutting process by a multisensor system installed on the machine tool. These signals are mathematically treated and then used as input for an artificial neural network. After training, the neural network system is qualified to estimate the surface roughness and hole diameter based on the signals and cutting process parameters. To evaluate the system, the estimated data were compared with experimental measurements and the errors were calculated. The results proved the efficiency of the proposed method, which yielded very low or even negligible errors of the tolerances used in most industrial drilling processes. This pioneering method opens up a new field of research, showing a promising potential for development and application as an alternative monitoring method for drilling processes. © 2012 Springer-Verlag London Limited.

Photosynthetic and anatomical responses of Eucalyptus grandis leaves to potassium and sodium supply in a field experiment

Although vast areas in tropical regions have weathered soils with low potassium (K) levels, little is known about the effects of K supply on the photosynthetic physiology of trees. This study assessed the effects of K and sodium (Na) supply on the diffusional and biochemical limitations to photosynthesis in Eucalyptus grandis leaves. A field experiment comparing treatments receiving K (+K) or Na (+Na) with a control treatment (C) was set up in a K-deficient soil. The net CO2 assimilation rates were twice as high in +K and 1.6 times higher in +Na than in the C as a result of lower stomatal and mesophyll resistance to CO2 diffusion and higher photosynthetic capacity. The starch content was higher and soluble sugar was lower in +K than in C and +Na, suggesting that K starvation disturbed carbon storage and transport. The specific leaf area, leaf thickness, parenchyma thickness, stomatal size and intercellular air spaces increased in +K and +Na compared to C. Nitrogen and chlorophyll concentrations were also higher in +K and +Na than in C. These results suggest a strong relationship between the K and Na supply to E. grandis trees and the functional and structural limitations to CO2 assimilation rates. © 2013 John Wiley & Sons Ltd.

Measurement of the Bs0→μ+μ- branching fraction and search for B0→μ+μ- with the CMS experiment

Results are presented from a search for the rare decays Bs0→μ+μ- and B0→μ+μ - in pp collisions at √s=7 and 8 TeV, with data samples corresponding to integrated luminosities of 5 and 20 fb-1, respectively, collected by the CMS experiment at the LHC. An unbinned maximum-likelihood fit to the dimuon invariant mass distribution gives a branching fraction B(Bs0→μ+μ-)=(3.0-0.9+1.0) ×10-9, where the uncertainty includes both statistical and systematic contributions. An excess of Bs0→μ+μ- events with respect to background is observed with a significance of 4.3 standard deviations. For the decay B0→μ+μ- an upper limit of B(B0→μ+μ-)<1.1×10 -9 at the 95% confidence level is determined. Both results are in agreement with the expectations from the standard model. © 2013 CERN. Published by the American Physical Society under the terms of the.

Produção de matéria seca da braquiária de acordo com os atributos químicos de um Latossolo em Selvíria, Mato Grosso do Sul

Rustic forages as the signal-grass are predominant in areas of Cerrado in extensive livestock systems that favor soil degradation. However, with time, not even these forages can have a good development in those areas. The objective of this study was to analyze the variability of plant and soil attributes; to define the linear and spatial correlations between signal-grass yield and the chemical attributes of the studied soil, and to evaluate, among the chemical attributes of the soil, which one that best explain the variability in this forage yield. The experiment was conducted in an area that had been under pasture for more than 30 years, belonging to UNESP - Ilha Solteira Campus, located in Selvíria - MS. A geostatistical grid was installed in an oxisol, for soil and plant data collection, with 121 sampling stations, consisted of eleven transections with 160 m width in the direction of the Cartesian axes. The dry mass yield of signal-grass was low, presenting high variation. The attributes MSr, N, PB, MO1, MO2, pHa1, pHa2, pHk1 and pHk2 did not vary at random. They presented data variability from low to high and followed clearly defined spatial patterns, ranging between 17.7-162.9 m. There was significant linear correlation at 1% between MSr and N leaf, and between MSr and PB. The cross semivariograms MSr=f(N) and MSr=f(PB) confirmed that the dry matter can be estimated from data of nitrogen leaf and crude protein content of this forage.