Persistence and Metabolism of Folpet in Grapes and Wine

The fate of folpet from the treatment on vine to the production of wine was studied. Sunlight degraded folpet to unknown products. Phthalimide was a minor metabolite formed on grapes from folpet. Folpet degraded in must, giving 80% phthalimide; the results obtained with model solutions showed that in must folpet can also give small amounts of phthalic acid. During wine-making folpet degraded completely, and at the end of fermentation phthalimide was only present in wine. This compound was stable in wine after several months. The presence of folpet in grapes inhibited the alcoholic fermentation of Saccharomyces cerevisiae and Kloeckera apiculata completely. Phthalimide, on the contrary, had no negative effect on the fermentative action of the two yeasts. GC and HPLC methods were developed to determine folpet and its metabolites.

Fate of Some New Fungicides (Cyprodinil, Fludioxonil, Pyrimethanil, and Tebuconazole) from Vine to Wine

The fate of four new fungicides (cyprodinil, fludioxonil, pyrimethanil, and tebuconazole) from the treatment on vine to the production of wine was studied. The influence of clarifying agents (bentonite, charcoal, potassium caseinate, gelatin, and polyvinylpolypyrrolidone) on residue concentrations in wine was also studied. The fungicide residues on grapes showed different decay rates after treatment, with first-order kinetics and half-lives ranging from 8 to 57 days. Grape processing into wine caused considerable residue reduction with cyprodinil (ca. 80%), fludioxonil (ca. 70%), and tebuconazole (ca. 50%) and no reduction with pyrimethanil. The two wine-making techniques employed (with and without maceration) had the same influence on the residue concentrations in wine, except for fludioxonil which showed maximum residue reduction with vinification with maceration. Among the clarifying agents tested, only charcoal showed effective action on the elimination of residue content in wine, proving complete elimination, or almost, of fungicide residues.

Residues of Some Pesticides in Fresh and Dried Apricots

The persistence of three pesticides (fenitrothion, dimethoate, and ziram) in apricots in field conditions and their fate during the drying process were studied. After the treatments, the pesticides showed fast decay rates with pseudo-first-order kinetics and half-lives ranging from 6.9 to 9.9 days. The drying process showed a different effect on residue concentrations in dried apricots: omethoate (metabolite of dimethoate) and ziram residues had almost doubled, while fenitrothion disappeared and dimethoate remained constant.

Damages occurrence and determination of dasineura Sp. (Díptera: Cecidomyiidae) in the pepper cultivars (Capsicum annuum L.) in piracicaba Sp.

The purpose of this study was to evaluate the damage potential of Dasineura sp. (Diptera: Cecidomyiidae) in the pepper cultivars and show its occurrence in Piracicaba, SP. This experiment was carried out from July to November 1998. The occurrence and damages pest in the fruits were determined by weekly evaluations of pepper hybrids, 'Magali R.' larvals were collected from floral buttons and adults were collected from the incubation of buttons in humidity chamber. Healthy and infested fruits were evaluated for damages caused by pest insects. The results indicated that the damages can reach 100% in some periods of evaluation and that the production losses are significantly high with no application of insecticides. The taxonomy study was performed at National Museum of Federal University of Rio de Janeiro (UFRJ). The insect species classification will be the object of study since there is a possibility of observing a specie not described yet.

Application of a serum/protein-free medium for the growth of mammalian cell lines and high level production of classical, variant and very virulent strain of infectious bursal disease virus (IBDV)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ant diversity in a sugarcane culture without the use of straw burning in southeast, são paulo, Brazil

Problem statement: One of the current requirements of agroecosystem management is the maintenance of biodiversity. Manual sugarcane harvesting with the previous burning of straw has been gradually replaced by mechanical harvesting in Brazil. However, the diversity of Formicidae, which can be a natural pest controller, has not been studied in this new system yet. Approach: This study was carried out to assess the diversity of ants in an exclusively mechanically harvested sugarcane culture based on the hypothesis that species richness and abundance will increase with the deposition of straw in this culture system. Ants were sampled using pitfall traps in six sugarcane cultivars during three consecutive harvest cycles. Results: A total of 8,139 ants, distributed in 39 species, were collected. Richness, abundance and diversity differed between harvest cycles, especially in the first cycle, when the soil did not have any straw and in the two last cycles and the straw layer was about 10-15 cm thick. The communities found in the second and third cycles were similar and the maintenance of straw in the culture contributed to a greater species diversity, particularly of generalist predaceous taxa, which may contribute to the natural control of pests. Conclusion: The diversity of ants increased with straw deposition, including of taxa that may be beneficial to the sugarcane culture. However, new studies of the predatory and competition relations in this agroecosystem are necessary. © 2010 Science Publications.

Relationship between citrus productivity and indicators of uniformity in trickle irrigation system

In trickle irrigation systems, the design is based on the pre-established emission uniformity (EU) which is the combined result of the equipment characteristics and its hydraulic configuration. However, this desired value of the EU may not be confirmed by the final project (in field conditions) and neither by the yield uniformity. The hypotheses of this research were: a) the EU of a trickle irrigation system at field conditions is equal to the emission uniformity pre-established in the its design; b) EU has always the lowest value when compared with other indicators of uniformity; c) the discharge variation coefficient (VC) is not equal to production variation coefficient in the operational unit; d) the difference between the discharge variation coefficient and the productivity variation coefficient depends on the water depth applied. This study aimed to evaluate the relationship between EU used in the irrigation system design and the final yield uniformity. The uniformity indicators evaluated were: EU, distribution uniformity (UD) and the index proposed by Barragan & Wu (2005). They were compared estimating the performance of a trickle irrigation system applied in a citrus orchard with dimensions of 400m x 600m. The design of the irrigation system was optimized by a Linear Programming model. The tree rows were leveled in the larger direction and the spacing adopted in the orchard was 7m x 4m. The manifold line was always operating on a slope condition. The sensitivity analysis involved different slopes, 0, 3, 6, 9 and 12%, and different values of emission uniformity, 60, 70, 75, 80, 85, 90 and 94%. The citrus yield uniformity was evaluated by the variation coefficient. The emission uniformity (EU) after design differed from the EU pre-established, more sharply in the initial values lower than 90%. Comparing the uniformity indexes, the EU always generated lower values when compared with the UD and with the index proposed by Barragan. The emitter variation coefficient was always lower than the productivity variation coefficient. To obtain uniformity of production, it is necessary to consider the irrigation system uniformity and mainly the water depth to be applied.

Productivity and water suppression in different beans (Phaseolus vulgaris L.) phenological stages

Common Bean (Phaseolus vulgaris L.) is widespread in the social and economic scene in Brazil, as well it is Brazilian population main dish, and it also helps small and medium farmers' income. The objective of this study was to compare the productivity performance of common bean Carioca - IAC Alvorada with irrigation suppression in each of the five phenological phases. The experiment was conducted in plots in a greenhouse at College of Agronomical Sciences, São Paulo State University (UNESP), Botucatu - SP. The hypothesis is that if the water supply is suppressed in one of the five development stages of irrigated common beans, the yield reduction would be at least 20%. The treatments consisted of suppression irrigation in one of the five development stages (stage V1 to V3, stage V4 to early flowering, flowering stage, pod formation stage and pod filling stage) compared with the irrigation at all stages and suppression of irrigation at all stages, with seven treatments and four replications. The treatments most affected by water suppression were those which suffered suppression of irrigation during the vegetative phase and flowering stage. Treatments with water suppression in all stages, and suppression during the phases (stage V1 to V3, stage V4 to early flowering, flowering stage, pod formation stage and pod filling stage) showed yield reduction of approximately 95%, 55.1%, 49.5%, 63,1%, 30.2% and 35.6%, respectively, when compared to treatment with irrigation all stages. All treatments considered confirmed the hypothesis.

Model to design drip hose lateral line using two spacing between emitters

The use of non-pressure compensating drip hose in horticultural and annual cycle fruits is growing in Brazil. In this case, the challenge for designers is getting longer lateral lines with high values of uniformity. The objective of this study was to develop a model to design longer lateral lines using non-pressure compensating drip hose. Using the developed model, the hypotheses to be evaluated were: a) the use of two different spacing between emitters in the same lateral line allows longer length; b) it is possible to get longer lateral lines using high values of pressure variation in the lateral lines since the distribution uniformity stays below allowable limits. A computer program was developed in Delphi based on the model developed and it is able to design lateral lines in level using non-pressure compensating drip hose. The input data are: desired distribution uniformity (DU); initial and final pressure in the lateral line; coefficients of relationship between emitter discharge and pressure head; hose internal diameter; pipe cross-sectional area with the dripper; and roughness coefficient for the Hazen-Williams equation. The program allows calculate the lateral line length with three possibilities: selecting two spacing between emitters and defining the exchange point; using two pre-established spacing between emitters and calculating the length of each section with different spacing; using one emitter spacing. Results showed that the use of two sections with different spacing between drippers in the lateral line didn't allow longer length but got better uniformity when compared with lateral line with one spacing between emitters. The adoption of two spacing increased the flow rate per meter in the final section which represented approximately 80% of the lateral line total length and this justifies their use. The software allowed DU above 90% with pressure head variation of 40% and the use of two spacing between emitters. The developed model/software showed to be accurate, easy to handle and useful for lateral line design using non-pressure compensating drip hose.

Determination of 2-methylimidazole and 4-methylimidazole in caramel colors by capillary electrophoresis

The use of chemical preservative compounds is common in the food products industry. Caramel color is the most usual additive used in beverages, desserts, and breads worldwide. During its fabrication process, 2- and 4-methylimidazole (MeI), highly carcinogenic compounds, are generated. In these cases, the development of reliable analytical methods for the monitoring of undesirable compounds is necessary. The primary procedure for the analysis of 2- and 4-MeI is using LC- or GC-MS techniques. These procedures are time-consuming and require large amounts of organic solvents and several pretreatment steps. This prevents the routine use of this procedure. This paper describes a rapid, efficient, and simple method using capillary electrophoresis (CE) for the separation and determination of 2- and 4-MeI in caramel colors. The analyses were performed using a 75 μm i.d. uncoated fused-silica capillary with an effective length of 40 cm and a running electrolyte consisting of 160 mmol L-1 phosphate plus 30% acetonitrile. The pH was adjusted to 2.5 with triethylamine. The analytes were separated within 6 min at a voltage of 20 kV. Method validation revealed good repeatability of both migration time (<0.8% RSD) and peak area (<2% RSD). Analytical curves for 2- and 4-MeI were linear in the 0.4-40 mg L-1 concentration interval. Detection limits were 0.16 mg L-1 for 4-MeI and 0.22 mg L-1 for 2-MeI. The extraction recoveries were satisfactory. The developed method showed many advantages when compared to the previously used method. © 2013 American Chemical Society.

Multi-choice mixed integer goal programming optimization for real problems in a sugar and ethanol milling company

Goal Programming (GP) is an important analytical approach devised to solve many realworld problems. The first GP model is known as Weighted Goal Programming (WGP). However, Multi-Choice Aspirations Level (MCAL) problems cannot be solved by current GP techniques. In this paper, we propose a Multi-Choice Mixed Integer Goal Programming model (MCMI-GP) for the aggregate production planning of a Brazilian sugar and ethanol milling company. The MC-MIGP model was based on traditional selection and process methods for the design of lots, representing the production system of sugar, alcohol, molasses and derivatives. The research covers decisions on the agricultural and cutting stages, sugarcane loading and transportation by suppliers and, especially, energy cogeneration decisions; that is, the choice of production process, including storage stages and distribution. The MCMIGP allows decision-makers to set multiple aspiration levels for their problems in which the more/higher, the better and the less/lower, the better in the aspiration levels are addressed. An application of the proposed model for real problems in a Brazilian sugar and ethanol mill was conducted; producing interesting results that are herein reported and commented upon. Also, it was made a comparison between MCMI GP and WGP models using these real cases. © 2013 Elsevier Inc.

Acute toxicity and environmental risk of teflubenzuron to Daphnia magna, Poecilia reticulata and Lemna minor in the absence and presence of sediment

This study aimed to estimate the acute toxicity of teflubenzuron (1-(3,5-dichloro-2,4-difluorophenyl)-3-(2,6-difluorobenzoyl)urea) (TFB) for Daphnia magna, Lemna minor and Poecilia reticulata, in the absence and presence of sediment; evaluate the effect of sediment on the TFB bioavailability; and to classify this insecticide according to its environmental poisoning risk for agricultural and aquaculture uses. The tests of TFB acute toxicity were conducted in static system in a completely randomized design with increasing TFB concentrations, and a control group. The TFB has been classified according to the estimated values of EC50 and LC50 by its acute toxicity and environmental risk. The sediment significantly reduced toxicity and bioavailability of TFB in water column. Therefore, the insecticide can be classified as being highly toxic to Daphnia magna, which means the agricultural and aquacultural uses of TFB pose a high risk of environmental toxicity to non-target organisms. However, it was practically non-toxic to L. minor and P. reticulata. © 2013 Copyright Taylor and Francis Group, LLC.

Development of a new method to prepare nano-/microparticles loaded with extracts of azadirachta indica, their characterization and use in controlling plutella xylostella

Biodegradable nanoparticles have been widely explored as carriers for controlled delivery of therapeutic molecules; however, studies describing the development of nanoparticles as carriers for biopesticide products are few. In this work, a new method to prepare nanoparticles loaded with neem (Azadirachta indica) extracts is presented. In this study, nanoparticles were formulated as colloidal suspension and (spray-dried) powder and characterized by evaluating pH, particle size, zeta potential, morphology, absolute recovery, and entrapment efficiency. A high-performance liquid chromatography method was used for nanoparticle characterization. The best formulations presented absolute recovery and entrapment efficiencies of approximately 100% and a release profile based on swelling and relaxation of the polymer or polymer erosion. The biological data of the formulated products against Plutella xylostella showed 100% larval mortality. The nanoparticle information improved the stability of neem products against ultraviolet radiation and increased their dispersion in the aqueous phase. © 2013 American Chemical Society.

Amostragem e dinâmica populacional do percevejo bronzeado Thaumastocoris peregrinus (hemiptera: thaumastocoridae) em floresta clonal de eucalipto

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de populações do psilídeo-de-concha Glycaspis brimblecombei (Hemiptera: Psyllidae) e de seu parasitóide Psyllaephagus bliteus (Hymenoptera: Encyrtidae) em floresta de Euclyptus camaldulensis por dois métodos de amostragem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)