The influence of landscape on the spatial and temporal distribution of stream macroalgal communities of two types of subtropical biomes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Technical and economic evaluation of different types of control of Brevipalpus phoenicis (Acari: Tenuipalpidae) in citrus leprosies management

The objective of this work was to evaluate the effect of acaricide applications and pruning of symptomatic branches in citrus leprosis management in Brazil. It was conducted in an orange plantation of the 'Pera' variety, grafted onto the 'Cleopatra' tangerine, in two seasons (2006-2007 and 2007-2008). The experimental design was randomized blocks in a factorial scheme consisting of the following factors: (A) acaricide, in three levels: spirodiclofen and cyhexatin applied in rotation, lime sulphur; no acaricides; (B) pruning to remove branches that showed symptoms of leprosis, with two levels: with pruning, without pruning. We carried out periodic assessments of Brevipalpus phoenicis (Geijskes) populations (vector of the leprosis virus), leprosis incidence and severity, fruit yield, and the economic feasibility of the applied strategies. Based on the results, we concluded that spirodiclofen and cyhexatin were more effective than lime sulphur in B. phoenicis control. Control with lime sulphur required more applications than spirodiclofen and cyhexatin in rotation, making it more expensive. Pruning of symptomatic branches used in isolation was not sufficiently effective to control leprosis and significantly increased control costs. Profits were higher when the control involved sprayings of spirodiclofen and cyhexatin in alternation, with or without pruning.

Effects of short-term immersion and brushing with different denture cleansers on the roughness, hardness, and color of two types of acrylic resin

Purpose: To investigate the cumulative effects of brushing (B) or immersion (I), using different cleansing agents, on the surface roughness, hardness and color stability of a heat-polymerized denture resin, Lucitone 550 (L), and a hard chairside reline resin, Tokuyama Rebase Fast II (T). Methods: A total of 316 specimens (10 x 2 mm) were fabricated. The specimens (n= 9) were divided into brushing or immersion groups according to the following agents: dentifrice/distilled water (D), 1% sodium hypochlorite (Na0C1), Corega Tabs (Pb), 1% chlorhexidine gluconate (Chx), and 0.2% peracetic acid (Ac). Brushing and immersion were tested independently. Assays were performed after 1, 3, 21, 45 and 90 blushing cycles or immersion of 10 seconds each. Data were evaluated statistically by repeated measures ANOVA. Tukey's honestly significant difference (HSD) post-hoc test was used to determine differences between means (a= 0.05). Results: For L there was no statistically significant difference in roughness, except a significant decrease in roughness by brushing with D. T showed a significant effect on the roughness after 90 immersions with Ac. Hardness values decreased for L when specimens were immersed or brushed in Na0C1 and Pb. The hardness of T decreased with increases in the repetitions (immersion or brushing), regardless of the cleaning method. Values of color stability for L resin showed significant color change after brushing with and immersion in Ac and Pb. Brushing with D exhibited a higher incidence of color change. For T there were no significant differences between cleaning agents and repetitions in immersion. A color change was noted after three brushings with the Ac, Chx, and D. Brushing with dentifrice decreased roughness of L. Immersion in or brushing with Na0C1 and Pb decreased the hardness of L. For T, hardness decreased with increases in immersions or brushing. Color changes after the immersion in or brushing with cleaning agents were clinically acceptable according to National Bureau of Standards parameters for both resins.

Four types of evidentiality in the native languages of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biological compatibility of some types of endodontic calcium hydroxide and glass ionomer cements

The purpose of this work was to evaluate the biological compatibility of the Sealapex, Apexit, Sealer 26 and Ketac Endo endodontic cements. Polyethylene tubes containing these cements were implanted in the subcutaneous tissue of 40 (forty) rats. The animals were sacrificed after 14 and 90 days. A descriptive analysis of the reactions found in the connective tissue by contact with the cements was performed. The magnitude of inflammatory infiltrate, the presence and predominance of cell types and their distribution as to the filling material and reparative phenomena, such as fibroblastic and angioblastic proliferation and formation of fibrous capsules, were subjectively measured. After 90 days, all cements presented statistically significant reduction of the inflammatory reaction, presence of a fibrous tissue capsule in contact with the opening of the tubes containing the filling materials, and reduction of fibroblastic proliferation. Angioblastic proliferation decreased only for the Sealer 26 and Ketac Endo groups. All cements tested were either partially or totally phagocyted, and the mildest inflammatory response was found for the Sealer 26 group at both evaluation periods.

Relationships between company size, types of production system and supply chain management: evidence from electro-electronics sector in Brazil

Purpose – The purpose of this paper is to investigate how company size and the type of production system affect the adoption of supply chain management (SCM) practices in companies in the electro‐electronics sector in Brazil. Design/methodology/approach – An e‐mail survey of 107 companies associated with the Brazilian Electrical and Electronics Industry Association (ABINEE) was conducted. Statistical techniques were employed to verify the adoption of SCM practices according to the size of the company and its production system. Findings – The major results indicate that the larger the size of the company, the higher the level of adoption of SCM practices, and that the choice of SCM practices depends upon the type of production system implemented. Practical implications – The implications of this study are useful to top management leaders of small and medium‐sized enterprises since the findings enable them to identify the most common practices adopted by either large‐, medium‐ or small‐sized companies in order to benchmark the level of adoption of SCM practices. Production managers can also benefit from this study by identifying the SCM practices that may support certain production systems.

Comparison between common traffic lights and three types of traffic lights with visual cycle a safety and capacity analysis

The objective of this paper is compare the common traffic lights (CTL) to three different types of traffic lights with countdown displays (SCD) and assess their effects on road safety and capacity. This comparison is required because the results found in the literature are divergent among countries and cities, and one of the SCD analyzed in our study is different from the SCD used worldwide. An observational before-after study was conducted to evaluate the safety and capacity in a period of one year before and one year after the implementation of the SCD in three Brazilian cities. The results indicate that the SCD models 1 and 3 had around 35%±14% reduction in the total number of accidents; the model 2, does not have significant reduction. In order to perform the capacity analysis a framework for data collection and an adaptation for estimation of initial lost time in each phase were developed. Considering the capacity analysis there was a reduction around 11% in the lost time in SCD model 1, 7% in SCD model 2 and 3% in SCD model 3. However the implications of this on capacity are trifle due to a small increase in the average headways for all SCD models compare to CTL.

Finite Element Stress Analysis of Edentulous Mandibles with Different Bone Types Supporting Multiple-Implant Superstructures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative gas exchange performance during the wet season of three Brazilian Styrax species under habitat conditions of cerrado vegetation types differing in soil water availability and crown density

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Polar Multiplicities and Euler obstruction of the stable types in weighted homogeneous map germs from C-n to C-3 n >= 3

In this article we show that for corank 1, quasi-homogeneous and finitely determined map germs f : (C-n, 0)-> (C-3, 0), n >= 3 one can obtain formulae for the polar multiplicities defined on the following stable types of f, f(Delta(f) and f(Sigma(n-2,1)(f), in terms of the weights and degrees of f. As a consequence we show how to compute the Euler obstruction of such stable types, also in terms of the weights and degrees of f.

FIBER TYPES DISTRIBUTION IN THE DIGASTRIC MUSCLE OF TUFTED CAPUCHIN MONKEY (CEBUS-APELLA)

Fiber types distribution in the diagastric muscle of tufted capuchin monkey was studied by means of NADH-TR, myosin-ATPase, after alkaline and acid preincubations and SDH histochemical reactions. Three different types of fibers were found presenting an equal distribution. The percentage and types of fibers were as follow: 18.2 % SO (Slow Oxydative), 38.4 % FOG (Fast Oxydative Glycolytic) and 43.4 % FG (Fast Glycolytic). FG fibers revealed the largest area. The relatively high concentration of fast twitch (81.2 %) seems to indicate this muscle is involved with the acceleration and fast speed of jaw movements. Aerobic metabolism represented by SO + FOG fibers (56.6 %) suggests that this muscle possesses an additional role than that related to the lowering of the jaw.

Substrates and container types on rooting of peach cv. Okinawa hardwood cuttings of different diameters

Propagation by hardwood cuttings is an important technique for producing plant of many species. The technique is usually easy and inexpensive and makes it possible to high plants. But it is not commonly used for peach propagation in Brazil. The objective of this study was to evaluate the effects of different substrates, container types and cutting diameters on rooting of peach hardwood cuttings. The cuttings (two size groups, diameters of 2-6 mm and 6-10 mm) were inserted in six substrates (carbonized rice husk, vermiculite, washed sand, carbonized rice husk + vermiculite, carbonized rice husk + washed sand and vermiculite + washed sand, each 1:1 v/v), each in three types of containers (plastic bag, plastic tray and polystyrene tray). The best rooting occurred with smaller cuttings (47%) and larger cuttings (38%) in plastic bag with vermiculite, and with smaller cuttings in plastic bag with washed sand + vermiculite (33%). While these rooting percentages were unsatisfactory for commercial propagation, the results are encouraging and suggest need for more investigation to improve rooting.

Absence of RKIP expression is an independent prognostic biomarker for gastric cancer patients

Gastric cancer is a leading cause of cancer-related mortality, and the presence of lymph node metastasis an important prognostic factor. Downregulation of RKIP has been associated with tumor progression and metastasis in several types of neoplasms, being currently categorized as a metastasis suppressor gene. Our aim was to determine the expression levels of RKIP in gastric tissues and to evaluate its impact in the clinical outcome of gastric carcinoma patients. RKIP expression levels were studied by immunohistochemistry in a series of gastric tissues. Overall, we analysed 222 non-neoplastic gastric tissues, 152 primary tumors and 42 lymph node metastasis samples. We observed that RKIP was highly expressed in ∼83% of non-neoplastic tissues (including normal tissue and metaplasia), was lost in ∼56% of primary tumors and in ∼90% of lymph node metastasis samples. Loss of RKIP expression was significantly associated with several markers of poor clinical outcome, including the presence of lymph node metastasis. Furthermore, the absence of RKIP protein constitutes an independent prognostic marker for these patients. In conclusion, RKIP expression is significantly lost during gastric carcinoma progression being almost absent in lymph node metastasis samples. Of note, we showed that the absence of RKIP expression is associated with poor outcome features of gastric cancer patients, this being also an independent prognostic marker.

Clinicopathological significance of ERCC1 expression in breast cancer

The excision repair cross-complementation 1 (ERCC1) enzyme plays an essential role in the nucleotide excision repair pathway and is associated with resistance to platinum-based chemotherapy in different types of cancer. The aim of the present study was to evaluate the clinicopathological significance of ERCC1 expression in breast cancer patients. We analyzed the immunohistochemical expression of ERCC1 in a tissue microarray from 135 primary breast carcinomas and correlated the immunohistochemical findings with clinicopathological factors and outcome data. ERCC1 expression analysis was available for 109 cases. In this group, 58 (53.2%) were positive for ERCC1. ERCC1-positive expression was correlated with smaller tumor size (P=0.007) and with positivity for estrogen receptor (P=0.040), but no correlation was found with other clinicopathological features. Although not statistically significant, triple negative breast cancers were more frequently negative for ERCC1 (61.5% of the cases) compared to the non-triple negative breast cancer cases (41.5%). In conclusion, ERCC1 expression correlated significantly with favorable prognostic factors, such as smaller tumor size and ER-positivity, suggesting a possible role for ERCC1 as a predictive and/or prognostic marker in breast cancer. © 2013 Elsevier GmbH.

Textured macro- and mesoporous alumina samples designed in the presence of different surfactant types

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)