Cinética micelial dos fungos comestíveis Pleurotus ostreatus e Lentinula edodes em resíduos lignocelulósicos

The objective of this work was to evaluate the mycelial growth of 2 edible fungi (Pleurotus ostreatus and Lentinula edodes) in 6 culture media [(malt-agar, sawdustdextrose-agar-marupá (SDA-MA), sawdust-dextrose-agar-cajuí (SDA-CA), sawdust-dextrose-agaraçaí (SDA-AÇA), sawdust-dextrose-agar-banana 50% (BAN 50%) and sawdust-dextrose-agar-banana 100% (BAN 100%)], in Petri dishes. The experimental design was totally randomized, in a 6x2 factorial scheme. Each treatment consisted of six repetitions in 1 Petri dish, totaling 72 experimental units. It was verified that P. ostreatus presented better mycelial development (81.00; 64.66; 81.00; 50.16 and 33.33mm for SDA-MA, SDA-CA, SDA-AÇA, BAN 50% and BAN 100%, respectively) than L. edodes (32.00; 31.66; 27.66; 37.33 and 21.83mm for SDA-MA, SDA-CA, SDA-AÇA, BAN 50% and BAN 100%, respectively). It was also verified that there was no advantage for L. edodes in relation to mycelial growth, when media based on residues were used, compared to malt-agar medium (control), which obtained the best performance (62.17mm). As for P. ostreatus, SDA-MA and SDA-AÇA medium presented the highest growth averages (81 mm), representing a growth increase of 34% in relation to the control medium (malt-agar), whose growth average was 60.33mm. Thus, the residues tested present potential to be used in fungiculture, especially for the cultivation of P. ostreatus.

Resíduos de bananeira como substrato base para o cultivo in vitro de Coprinus comatus

Coprinus comatus is an edible and lignolitic fungus which has presented great potential for commercial use due to its easy development in the different residues, such as banana tree leave. Thus, the mycelial growth of Coprinus comatus in culture media based on leaves of Thap-Maeo, Prata-Anã, Pelipita and Caipira banana tree cultivars, supplemented with 20% of wheat, soy and rice brans, was evaluated. 7 mm-wide discs of CCO 01/01 strain of C. comatus were inoculated in the middle of Petri dishes containing culture medium, inside a laminar flow chamber. Next, the dishes were arranged totally at random inside an incubator at 25 ºC. The daily measurements of the mycelial growth began after 24 hours, until one of the treatments reached the borders of the Petri dish. According to the results obtained, we verified that there was not effect of the kind of supplementation for culture media based on Thap-Maeo, Prata-Anã and Pelipita; the best growth averages for culture media based on Caipira were provided by wheat and rice brans. Therefore, banana residues may be a viable and ecologically correct choice for the cultivation of C. comatus, especially for Thap-Maeo and Prata Anã sorts, which provided the best growth averages, regardless of the supplementation used.

Cultivo in vitro de Pleurotus ostreatus em resíduos de bananeira

The objective of this paper was to evaluate the mycelial growth of Pleurotus ostreatus (strain POS 09/100) in culture media based on different banana tree residues. The experimental design was totally randomized in 3 x 4 factorial scheme and consisted in three combinations of residues (pseudostem, leave and pseudostem + leave) and four banana tree cultivars (Thap Maeo, Prata Anã, Pelipita and Caipira), totalizing twelve treatments each with five repetitions, adding up sixty experimental units. Growth was measured every 24 hours until the mycelium of one of the treatments reached the border of the Petri dish, what occurred five days after the beginning of the experiment. The results obtained showed that all the combinations of banana tree residues were favorable to P. ostreatus mycelial growth, especially pseudostem + leaf of Pelipita, Thap maeo and Prata anã cultivars. Thus, the use of banana tree residues is viable for cultivation of P. ostreatus, and considered as an excellent alternative, besides reducing their disposal in the environment.

Quality of Cotesia flavipes (Hymenoptera: Braconidae) reared at different host densities and the estimated cost of its commercial production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preferência alimentar de Dione juno juno (CRAMER, 1779) (Lepidoptera: Nymphalidae) por genótipos de maracujazeiro

O presente trabalho teve por objetivo determinar o efeito de genótipos de maracujazeiro quanto à atratividade e à não-preferência para alimentação de lagartas de Dione juno juno, em diferentes idades, através de testes com e sem chance de escolha. Os experimentos foram conduzidos no Departamento de Fitossanidade da FCAV/UNESP de Jaboticabal-SP, sob condições ambientais controladas (T=26=±=1°C=U.=R.= 60 ± 10% e fotofase = 14 horas), utilizando-se dos genótipos Passiflora edulis, P. gibertii, P. alata, Sul Brasil, IAC-275, Flora FB 300, P. serrato-digitata, P. edulis f. flavicarpa, Maguary FB-100 e P. foetida. Para o teste com chance de escolha, foram utilizadas placas de Petri, onde foram distribuídos, de forma eqüidistante, um disco foliar (3,2 cm) de cada genótipo estudado e liberando-se em seguida, no centro da placa, 5 lagartas recém-eclodidas ou uma lagarta com 10 dias de idade por material. No teste sem chance de escolha, foi colocado apenas um disco de cada genótipo por placa de Petri (9 cm de diâmetro), mantendo-se o mesmo padrão de infestação utilizado no teste com chance. As avaliações foram realizadas em duas etapas, sendo que, na primeira, avaliou-se a atratividade, contando o número de lagartas em cada material a 1; 3; 5; 10; 15; 30; 60; 120; 240 minutos e 24 horas após a liberação das mesmas. Na segunda etapa, observou-se o consumo foliar 24 horas após o início do teste. O genótipo menos atrativo às lagartas recém-eclodidas e de 10 dias de idade foi P. alata em testes com e sem chance de escolha. O genótipo P. alata foi o menos consumido em teste com chance de escolha, sendo que, no teste sem chance, P. alata e P. foetida destacaram-se como os menos consumidos para as duas fases larvais.

Direct and transdentinal antibacterial activity of chlorhexidine

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Arquitetura multiprocessada e reconfigurável para a síntese de redes de Petri em hardware

Uma arquitetura reconfigurável e multiprocessada para a implementação física de Redes de Petri foi desenvolvida em VHDL e mapeada sobre um FPGA. Convencionalmente, as Redes de Petri são transformadas em uma linguagem de descrição de hardware no nível de transferências entre registradores e um processo de síntese de alto nível é utilizado para gerar as funções booleanas e tabelas de transição de estado para que se possa, finalmente, mapeá-las num FPGA (Morris et al., 2000) (Soto and Pereira, 2001). A arquitetura proposta possui blocos lógicos reconfiguráveis desenvolvidos exclusivamente para a implementação dos lugares e das transições da rede, não sendo necessária a descrição da rede em níveis de abstração intermediários e nem a utilização de um processo de síntese para realizar o mapeamento da rede na arquitetura. A arquitetura permite o mapeamento de modelos de Redes de Petri com diferenciação entre as marcas e associação de tempo no disparo das transições, sendo composta por um arranjo de processadores reconfiguráveis, cada um dos quais representando o comportamento de uma transição da Rede de Petri a ser mapeada e por um sistema de comunicação, implementado por um conjunto de roteadores que são capazes de enviar pacotes de dados de um processador reconfigurável a outro. A arquitetura proposta foi validada num FPGA de 10.570 elementos lógicos com uma topologia que permitiu a implementação de Redes de Petri de até 9 transições e 36 lugares, atingindo uma latência de 15,4ns e uma vazão de até 17,12GB/s com uma freqüência de operação de 64,58MHz.

Atividade predatória de Euseius citrifolius Denmark & Muma (Acari: Phytoseiidae) sobre Tenuipalpus heveae (Acari: Tenuipalpidae)

The rubber tree red false spider mite, Tenuipalpus heveae Baker, is an important pest of Hevea brasiliensis (Willd. ex. Adr. de Juss.) Muell. Arg. The phytoseiid mite Euseius citrifolius Dennmark & Muma has frequently been recorded on rubber tree crops. The objective of this work was to determine the predatory activity of E. citrifolius on the different life stages (egg, larva, nymph and adult) of T. heveae. The experiments were carried out in Petri dishes (9-cm diameter) containing a layer of wet cotton inside, onto which a disk of rubber tree leaf (2.5-cm diameter) was laid. The disks were taken from naturally infested leaves. Twenty specimens in the life stage that was to be tested were left on the disk and the others were eliminated; a predator life stage (larva, nymph or female) was obtained from a laboratory stock colony and put into each dish. For each tested life stage of E. citrifolius, 4 treatments (T. heveae life stages) and 20 replications were considered in a randomized block design. The observations were made after 24 hours for larvae and nymphs of the predator, and after 24, 48 and 72 hours for the females. E. citrifolius larvae and nymphs had a higher preference for T. heveae larvae followed by nymphs, eggs and adults. Within 72 hours, each predator female consumed 15.0 larvae, 14.5 nymphs, 7.4 adults or 2.2 eggs of T. heveae. It is concluded that E. citrifolius can feed on red false spider mites, the larva and nymph being the preferred stages.

A petri net based timing model for hardware/software co-design of digital systems

We have recently proposed an extension to Petri nets in order to be able to directly deal with all aspects of embedded digital systems. This extension is meant to be used as an internal model of our co-design environment. After analyzing relevant related work, and presenting a short introduction to our extension as a background material, we describe the details of the timing model we use in our approach, which is mainly based in Merlin's time model. We conclude the paper by discussing an example of its usage. © 2004 IEEE.

Petri nets teaching in the Mechatronics Engineering course

The current solutions implanted in the majority of manufacturing systems controlled by PLCs were developed through the language of programming known as ladder. Such a language, easily learned and handled, shows to be efficient whenever the system to be implanted does not demand greater complexity of analyses. Bigger systems, presenting characteristics in which resource compartments, parallelism and synchronizing among processes are more frequent, demand the adoption of solutions differentiation. This article presents a teaching experience and practical application of Petri nets in a Mechatronics Engineering graduation course. Copyright © 2007 IFAC.

Petri nets and autonomous systems: A case study

This work presents the Petri net-based modeling of an autonomous robot's navigation system used for the application of supplies in agriculture. The model was developed theoretically and implemented through the CPNTools software. It simulates the behavior of the robot, capturing environmental characteristics by means of sensors, making appropriate decisions, and forwarding them to the corresponding actuators. By exciting the model using CPNTools it is possible to simulate situations that the robot might undergo, without the need to expose it to real potentially dangerous situations. ©2009 IEEE.

Digital system design process automation using place/transition petri nets

The constant increase in digital systems complexity definitely demands the automation of the corresponding synthesis process. This paper presents a computational environment designed to produce both software and hardware implementations of a system. The tool for code generation has been named ACG8051. As for the hardware synthesis there has been produced a larger environment consisting of four programs, namely: PIPE2TAB, AGPS, TABELA, and TAB2VHDL. ACG8051 and PIPE2TAB use place/transition net descriptions from PIPE as inputs. ACG8051 is aimed at generating assembly code for the 8051 micro-controller. PIPE2TAB produces a tabular version of a Mealy type finite state machine of the system, its output is fed into AGPS that is used for state allocation. The resulting digital system is then input to TABELA, which minimizes control functions and outputs of the digital system. Finally, the output generated by TABELA is fed to TAB2VHDL that produces a VHDL description of the system at the register transfer level. Thus, we present here a set of tools designed to take a high-level description of a digital system, represented by a place/transition net, and produces as output both an assembly code that can be immediately run on an 8051 micro-controller, and a VHDL description that can be used to directly implement the hardware parts either on an FPGA or as an ASIC.

Automatic code generation for microcontrollers from place-transition Petri net models

This paper describes a program for the automatic generation of code for Intel's 8051 microcontroller. The code is generated from a place-transition Petri net specification. Our goal is to minimize programming time. The code generated by our program has been observed to exactly match the net model. It has also been observed that no change is needed to be made to the generated code for its compilation to the target architecture. © 2011 IFAC.

Finding best urban routes based on analyses of high level and IOPT Petri net models

This paper presents a tool that combines two kinds of Petri Net analyses to set the fastest routes to one vehicle in a bounded area of traffic urban. The first analysis consists of the discovery of possible routes in a state space generated from an IOPT Petri net model given the initial marking as the vehicle position. The second analysis receives the routes found in the first analysis and calculates the state equations at incidence matrix created from the High Level Petri net model to define the fastest route for each vehicle that arrive in the roads. It was considered the exchange of information between vehicle and infrastructure (V2I) to get the position and speed of all vehicles and support the analyses. With the results obtained we conclude that is possible optimizing the urban traffic flow if this tool is applied to all vehicles in a bounded urban traffic. © 2012 IEEE.

Controlling traffic jams on urban roads modeled in Coloured Petri net using Genetic Algorithm

This paper presents an application to traffic lights control in congested urban traffic, in real time, taking as input the position and route of the vehicles in the involved areas. This data is obtained from the communication between vehicles and infrastructure (V2I). Due to the great complexity of the possible combination of traffic lights and the short time to get a response, Genetic Algorithm was used to optimize this control. According to test results, the application can reduce the number of vehicles in congested areas, even with the entry of vehicles that previously were not being considered in these roads, such as parked vehicles. © 2012 IEEE.